Tetsu-to-Hagane
Online ISSN : 1883-2954
Print ISSN : 0021-1575
ISSN-L : 0021-1575
Aerothermochemical Considerations on Direct Reductive Heating of a Flat Steel Plate
Kazuhiro ISHIBASHIShunichi TSUGE
Author information
JOURNAL FREE ACCESS

1990 Volume 76 Issue 3 Pages 345-351

Details
Abstract

The Direct Reductive Heating (DRH) was great practical advantage in continuous heating of thin steel plates compared with the conventional indirect heating conducted under nitrogen environment.DRH has been so far employed experimentally with some success at the level of know-hows.However, its theoretical background has not been given as to what aerothermochemical conditions necessary for reduction at a steel surface to be realized.An computational approach for the 2-D flame held in the boundary layer of a steel surface shows some evidence of DRH judging from the concentration profiles of chemical species.In fact, the ratio of CO2 /CO the most crucial measure for the reduction goes down to less than 0.1 on the surface just behind the flame foot, for a narrow wall temperature range around 900°C.It is concluded thereby that a fuel-rich hydrocarbon-air mixture can generate a reductive region behind the flame front where the oxygen is depleted if the cooling effect due to the wall is favorable for formation of more CO rather than CO2.

Content from these authors
© The Iron and Steel Institute of Japan
Previous article Next article
feedback
Top