Tetsu-to-Hagane
Online ISSN : 1883-2954
Print ISSN : 0021-1575
ISSN-L : 0021-1575
Effective Thermal Conductivities of Products in the Stepwise Reduction of Agglomerated Iron Ore
Tomohiro AKIYAMATakashi FUKUTANIHiromichi OHOTAReijiro TAKAHASHIYoshio WASEDAJun-ichiro YAGI
Author information
JOURNALS FREE ACCESS

1992 Volume 78 Issue 6 Pages 870-877

Details
Abstract

Effective thermal conductivities of fired pellets, nonfired pellets and sinter which were reduced in a stepwise manner to magnetite, wustite and metallic iron by CO-CO2 or H2 gas have been measured by the laser flash method in the temperature range from room temperature to 1273 K.
As the reduction proceeded, porosity of the samples changed from 23% to 62%. Measured effective thermal conductivities of the samples were remarkably smaller than those of dense materials. Thermal conductivities of metallic iron and hematite depended strongly on temperature in comparison with wustite. As the samples were reduced, the effective thermal conductivity decreased and reached a minimum value in wustite, but increased to 510 times in metallic iron. The treatment of reduction in stepwise at 1273 brought a little difference among the effective thermal conductivities of the three kinds of samples.
The influence of reducing gas, namely ; pure CO or H2, on the temperature dependence of the effective thermal conductivity of metallic iron was observed. This is probably attributed to the generation of different structures of the samples. The data measured were correlated on the basis of the unit cell model. As a result, this model succeeded in explaining the actual bonding condition among neighbor grains and the equations obtained agreed well with the data observed.

Information related to the author
© The Iron and Steel Institute of Japan
Previous article Next article
feedback
Top