Online ISSN : 1883-2954
Print ISSN : 0021-1575
ISSN-L : 0021-1575
Simultaneous Determination of Trace Copper, Lead, Cadmium and Zinc in Iron and Steel by Stripping Analysis
Tatsuhiko TANAKATomohiro KASHIHARAAtsushi TAGUCHIHiroyuki KONDO
Author information

2003 Volume 89 Issue 9 Pages 906-913


A simple and reliable method is described for the simultaneous determination of copper, lead, cadmium and zinc at the μgg-1 level in iron and steel by two different stripping techniques without any preliminary separation of the iron matrix. Constant current stripping analysis (CCSA) at a mercury-coated glassy carbon electrode was compared with anodic stripping voltammetry (ASV) at a hanging mercury drop electrode. Analyte ions in nitric-sulfuric acid mixture solutions (pH=4 for ASV) were electrodeposited on the working electrode with stirring at a controlled potential for 3 to 10 min. The deposits were then anodically stripped at a constant current of +30μA for CCSA or in the potential range -1.2 to -0.2V vs. SCE at a scan rate of 20mVs-1 by a differential pulse mode for ASV. The interference of iron(III) was eliminated by reducing it with L(+)-ascorbic acid to iron(II). The influence of foreign elements on the determination was evaluated. The lower limits of determination for CCSA and ASV were 50 and 0.5μgg-1 of lead, cadmium and zinc in iron and steel, respectively. Differential pulse ASV had high sensitivity and poor peak resolution compared with CCSA. The simultaneous determination of 5 to 60ugg-1 of these four elements in iron was achieved with the relative standard deviations (n=5) of less than 7% within 12 min. Recoveries for the analytes ranged from 88 to 108%. The proposed methods can be also applied to the simultaneous determination of tramp elements in obsolete steel scrap.

Information related to the author
© The Iron and Steel Institute of Japan
Previous article Next article