鉄と鋼
Online ISSN : 1883-2954
Print ISSN : 0021-1575
ISSN-L : 0021-1575
高炉低還元材比操業に向けた周辺流制御と原材料品質設計
佐藤 健佐藤 道貴武田 幹治有山 達郎
著者情報
ジャーナル フリー

2006 年 92 巻 12 号 p. 1006-1014

詳細
抄録

Concepts and targets of operational conditions and burden qualities for reduction of exhaust carbon dioxide (CO2) are discussed with consideration of an energy balance at Steel works. Lowering a reducing agent rate (RAR) with reduction of a heat loss and increase in a shaft efficiency is desirable measures to decrease in the exhaust CO2. Suppressed gas flow at a peripheral part of furnace contributes to improvement of both heat loss and shaft efficiency, however, promoted gas flow at that part is necessary for a stable state of gas permeability with low quality burden against degradation behavior. To apply for the operational design, effects of sinter RDI and coke TI on the RAR and exhaust CO2 through the changes in peripheral gas flow are clarified on the basis of analyses of the operational results and simulations by using of the mathematical model. For example, improvement with -10.4% of RDI and 0.69% of TI contributes the reduction of RAR by 10 kg/t through changes of heat loss by 78.3 MJ/t and shaft efficiency by 0.014.

著者関連情報
© 一般社団法人 日本鉄鋼協会
前の記事 次の記事
feedback
Top