IEICE Transactions on Electronics
Online ISSN : 1745-1353
Print ISSN : 0916-8524

This article has now been updated. Please use the final version.

A noise-canceling charge pump for area efficient PLL design
Go URAKAWAHiroyuki KOBAYASHIJun DEGUCHIRyuichi FUJIMOTO
Author information
JOURNAL FREE ACCESS Advance online publication

Article ID: 2020CTP0004

Details
Abstract

In general, since the in-band noise of phase-locked loops (PLLs) is mainly caused by charge pumps (CPs), large-size transistors that occupy a large area are used to improve in-band noise of CPs. With the high demand for low phase noise in recent high-performance communication systems, the issue of the trade-off between occupied area and noise in conventional CPs has become significant. A noise-canceling CP circuit is presented in this paper to mitigate the trade-off between occupied area and noise. The proposed CP can achieve lower noise performance than conventional CPs by performing additional noise cancelation. According to the simulation results, the proposed CP can reduce the current noise to 57% with the same occupied area, or can reduce the occupied area to 22% compared with that of the conventional CPs at the same noise performance. We fabricated a prototype of the proposed CP embedded in a 28-GHz LC-PLL using a 16-nm FinFET process, and 1.2-dB improvement in single sideband integrated phase noise is achieved.

Content from these authors
© 2021 The Institute of Electronics, Information and Communication Engineers
feedback
Top