日本機械学会論文集
Online ISSN : 2187-9761
ISSN-L : 2187-9761
計算力学
サイクルジャンプ法を用いた繰返し荷重問題解析の高精度化に関する研究(有限変形問題への拡張)
佐藤 皓明遊佐 泰紀岡田 裕
著者情報
ジャーナル フリー

2019 年 85 巻 879 号 p. 19-00299

詳細
抄録

In this paper, a formulation and some computational results of cycle jump method for finite strain elastic-plastic problems subject to cyclic loads are presented. The cycle jump method is to shorten the total computational time. An analysis using the cycle jump method is carried out such that a combination of a few cycles of cycle-by-cycle analysis and the cycle jump by extrapolating physical quantities such as the plastic strains for many cycles based on the results of preceding cycle-by-cycle analysis. The cycle-by-cycle analysis and the cycle jump are repeated until the desired load cycle is achieved. When the method is applied to the finite strain elastic-plastic problem, it involves the finite rotation and the finite stretch. Then, both of them are decomposed into the elastic and the plastic components. This paper presents appropriate treatments on the rotation and the stretch under the multiplicative decomposition of the deformation into the plastic and the elastic parts. Then, some numerical examples are shown. It is concluded that the proposed cycle jump approach performs well under a certain conditions. Such conditions are also described in the paper.

著者関連情報
© 2019 一般社団法人日本機械学会
前の記事 次の記事
feedback
Top