日本機械学会論文集
Online ISSN : 2187-9761
ISSN-L : 2187-9761

この記事には本公開記事があります。本公開記事を参照してください。
引用する場合も本公開記事を引用してください。

内歯車のスカイビングにおける歯形と歯厚の調整に関する研究(目標の歯形と歯厚を得るためのカッタ配置の計算方法)
瓜生 耕一郎村上 隆則中村 守正射場 大輔船本 雅巳森脇 一郎
著者情報
ジャーナル フリー 早期公開

論文ID: 17-00536

この記事には本公開記事があります。
詳細
抄録

The high productivity of gear skiving has caused the process to attract a lot of attention in recent years and taper shaped skiving cutters are generally used in current gear skiving. A cutter axis in gear skiving is inclined to a gear axis and a taper shaped skiving cutter could cause tooth profile deviations of skived gears after re-sharpening of tool faces. Adjusting cutter position and/or re-profiling of cutter flanks are applied to enable tooth profile deviations of skived gears to remain within acceptable ranges when the adjustment is necessary. Adjusting cutter position is preferred to re-profiling of cutter flanks due to desire for low production cost. However, the universality of the current methods of calculating cutter positions is still not confirmed. The present study explains that the current methods for obtaining cutter positions could require individual calculating formulas according to cutter specifications for each particular gear. A universal method which avoids such complexity of making various formulas could contribute to permit gear skiving to become more useful in the gear machining field. Then such a desirable method is proposed and the reasonability of the method is confirmed by experiments. In addition, this study discusses the existence of scope in which the method can be applied and a method for checking collisions between cutter flanks and gear tooth flanks being cut after adjustment of cutter position.

著者関連情報
© 2018 一般社団法人日本機械学会
feedback
Top