日本機械学会論文集
Online ISSN : 2187-9761
ISSN-L : 2187-9761

この記事には本公開記事があります。本公開記事を参照してください。
引用する場合も本公開記事を引用してください。

押し込み回数が対象物の硬さを弁別する精度に及ぼす影響
坂口 歳斗土井 幸輝西村 崇宏藤本 浩志
著者情報
ジャーナル フリー 早期公開

論文ID: 18-00119

この記事には本公開記事があります。
詳細
抄録

Acupuncturists determine muscle stiffness by pressing their fingers down. To shorten the palpation time and minimize discomfort to the patient, a good palpation technique is required to determine the stiffness of the patient's muscles with as few presses as possible. However, palpation is dependent on the experience of the practitioner. Therefore, an investigation of human hardness discrimination characteristics is necessary to provide some quantitative guidance. In this study, to determine the relationship between different numbers of presses and the accuracy of discriminating hardness, we investigated the differential threshold of hardness for different numbers of presses (1, 3, or 5). We used 7 elastic test pieces, each with a different Young's modulus, as the presented stimuli. We conducted an experiment using the constant stimuli method to calculate the differential threshold of hardness as an evaluation index of hardness identification. In the experiment, the participants repeatedly pressed for either 1, 3, or 5 sets by using 2 presented stimuli and then distinguished the hardness of the stimuli. The results of the experiment showed that when the pressing forces were 5 and 10 N, as the number of presses decreased, the differential threshold of hardness increased. However, when the pressing force was 15 N, the differential threshold of hardness was small regardless of the number of indentations. This knowledge will be useful for the improvement of the palpation technique in acupuncture schools. For example, the index of the hardness discrimination characteristic used in this study may be used as a quantitative numerical target and for performance evaluation.

著者関連情報
© 2018 一般社団法人日本機械学会
feedback
Top