日本機械学会論文集
Online ISSN : 2187-9761
ISSN-L : 2187-9761

この記事には本公開記事があります。本公開記事を参照してください。
引用する場合も本公開記事を引用してください。

円柱型ガイドを用いた直線翼ダリウス型風車の性能向上
川口 清司春山 幸浩
著者情報
ジャーナル フリー 早期公開

論文ID: 18-00212

この記事には本公開記事があります。
詳細
抄録

In late years, from the viewpoints of drying up of fossil fuels such as oil or coal, and prevention of global warming, the renewable energy such as solar power generation or wind power generation attracts attention. The wind power generation can generate electricity with relatively low cost in renewable energy. A highly efficient propeller type wind turbine is generally used for wind power generation, but disadvantages are that the posture control to the direction of the wind is needed, and propeller type wind turbine is noisy. The Darrieus type wind turbine has the features that the control for wind direction is unnecessary, and the low noise, which is suitable for using in a residential area. In this paper we improve the performance of the wind turbine by mounting the cylinder type flow guide in a Darrieus type wind turbine. The guide ratio defined as the ratio of cylindrical guide diameter against wind turbine diameter was examined by experiment varying chord length. As a result, it was clarified that the wind turbine with guide ratio rd /ld=0.45, number of wings N=3, wing cord length lc=80 mm indicated the highest power coefficient Cpmax =0.172. Moreover the flow around wing was calculated by LES under the conditions with and without cylindrical guide. As a result, it was clarified that the performance of wind turbine with cylindrical guide was improved by decrease of separation on suction side wing surface.

著者関連情報
© 2018 一般社団法人日本機械学会
feedback
Top