Asian Pacific Journal of Dentistry
Online ISSN : 2185-3487
Print ISSN : 2185-3479
最新号
選択された号の論文の2件中1~2を表示しています
  • Tomokuni Waki, Toshiko Sawada, Hajime Ishigami, Kohei Shintani, Katsus ...
    2021 年 21 巻 1 号 p. 1-6
    発行日: 2021年
    公開日: 2021/04/14
    ジャーナル オープンアクセス
    Purpose: The purpose of this study was to recycling diatomite from alginate impression materials and investigate its potential as an abrading agent for denture base resins. Materials and Methods: After heating hardened alginate impression materials, a lump-like solid was powdered using a mortar and a pestle. The powder (experimental sand, ES) was characterized by X-ray diffraction (XRD). To explore the suitable ES/wax ratio, three amounts (1, 3, and 5 g, corresponding to samples ES1, ES3, ES5, respectively) were blended with 6 g of casting wax. Casting wax bars without ES were also prepared as the control. In addition, commercial diatomite (reagent-grade diatomite, RD) and a commercial final polishing product for acrylic resin (TE) were examined and compared. A disk-shaped self-curing resin (diameter: 30 mm, thickness: 3 mm) was prepared as a specimen and ground by polishing paper (#800-1,000). Surface gross measurements and surface roughness values after polishing were determined using a gross meter. These surface roughness and gloss data were statistically analyzed by one-way ANOVA and Tukey’s multiple comparison test (α = 0.05). Results: Based on the XRD results, diatomite was successfully detected in the heated alginate impression material. Sample ES3 showed good performance in experimental polishing tools, and its polishing effects were almost identical to those of RD. However, ES3 was inferior to TE in terms of surface gloss, and ES0 exhibited no polishing effect. Conclusion: Within this limited study, diatomite obtained from alginate gel was found to be effective as the final polishing material in denture base resin.
  • Yu Takaesu, Yusuke Taniguchi, Naoyuki Kaga, Kota Isshi, Hirofumi Kido, ...
    2021 年 21 巻 1 号 p. 7-10
    発行日: 2021年
    公開日: 2021/04/14
    ジャーナル オープンアクセス
    The patient, an 18-year-old woman, complained of an esthetic problem due to a defect of a maxillary lateral incisor, with which cleft lip and palate coincided. A prosthodontic treatment was performed with a cantilever all-ceramic resin-bonded fixed dental prosthesis (RBFDP) using a digital impression. The fixed prosthetic treatment satisfied the patient aesthetically. Cantilever all-ceramic RBFDP using positioning splint and digital impression was effective for patients with cleft palate.
feedback
Top