All issues
Volume 59, Issue 12
Displaying 1-13 of 13 articles from this issue
- |<
- <
- 1
- >
- >|
Accounts
-
Tomoharu Minami, Eri Higo, Seiji Nakatsuka, Abigail Parcasio Cid, Thi ...Article type: Accounts
2010 Volume 59 Issue 12 Pages 1087-1096
Published: 2010
Released on J-STAGE: January 24, 2011
JOURNAL FREE ACCESSBioactive trace metals are essential or highly toxic elements for organisms. The most important bioactive trace elements in the ocean environment are Al, Mn, Fe, Co, Ni, Cu, Zn, Cd and Pb, whose concentrations in seawater are generally less than tens of nmol kg−1. In previous methods, there were problems, such as contamination, interferences by major constituents and a non-quantitative recovery of the target metals, especially Al and Mn. We developed a novel method for analyzing the 9 elements based on solid-phase extraction-inductively coupled plasma mass spectrometry (ICP-MS). In this method, a column packed with chelating absorbent, which had ethylenediaminetriacetic and iminodiacetic acid groups, was used in a closed concentration system. The proposed method was able to concentrate all of the 9 elements simultaneously and quantitatively, and to remove the major constituents in seawater. The procedural blanks for Mn, Co, Ni, Cu and Cd were less than the detection limits for ICP-MS (3 times the standard deviations of 1 mol L−1 HNO3), and those for Al, Fe, Zn and Pb were 0.14, 0.03, 0.07 and 0.003 nmol kg−1, respectively. The overall detection limits for Al, Mn, Fe, Co, Ni, Cu, Zn, Cd and Pb were 0.24, 0.01, 0.04, 0.002, 0.01, 0.01, 0.06, 0.01 and 0.001 nmol kg−1, respectively. In this paper, we review the development of this method and its application to international intercalibration using open-ocean seawater.View full abstractDownload PDF (834K)
Research Papers
-
Akihide Itoh, Mami Yamaguchi, Ayako Yamada, Teruo Arakaki, Noriko Kabe ...Article type: Research Papers
2010 Volume 59 Issue 12 Pages 1097-1104
Published: 2010
Released on J-STAGE: January 24, 2011
JOURNAL FREE ACCESSA molybdenum-blue method with the preconcentration of ion pairing form on MF was applied for the speciation of phosphorus in coastal seawater at three points in Okinawa island and their monitoring from 2007 to 2008. The features of water quality for coastal seawater near Okinawa island were discussed from four kinds of physicochemical forms of phosphorus, such as dissolved, particle-adsorbed, insoluble particulate, and total. As a result, analytical results for Sesoko island samples in the suburb area showed a significantly different concentration distribution from those for Tomari port samples in the urban area. The total concentrations of P for Sesoko island samples were 14.0 μg L−1 on the average, and 16% and 65% of the total P were dissolved and insoluble particulate forms, respectively. On the contrary, the total concentrations of P for Tomari port samples were 14.0 μg L−1 on the average and 64% of total P was dissolved form. In addition, the concentration correlation between dissolved phosphate ions and trace metals classified as the nutrient type was investigated. The molar ratios of [Cd]/[PO43−] for Sesoko island samples were 1.46-3.7 × 10−3, which were significantly the higher than those for literature values in open surface seawater of the North Pacific Ocean. The cause of higher ratios of [Cd]/[PO43−] can be attributed to the input of Cd to the coastal seawater near Sesoko island or the difference of the intake speed of dissolved phosphate ions by each phytoplankton.View full abstractDownload PDF (509K) -
Hirotsugu Minami, Hirotoshi Sakagami, Junling Bai, Kanako Mantoku, Dai ...Article type: Research Papers
2010 Volume 59 Issue 12 Pages 1105-1111
Published: 2010
Released on J-STAGE: January 24, 2011
JOURNAL FREE ACCESSThe determination of trace nickel in water samples was conducted by isotope dilution–microwave induced plasma mass spectrometry (ID-MIP-MS) to clarify the concentration-depth vertical profiles of nickel in Lake Mashu (maximum water depth : 212 m), Japan. This lake serves as the Baseline Station of the United Nations GEMS/Water (Global Environment Monitoring System/Water) Programme. The concentrations of nickel in the lake water samples decreased with depth from 0.3 m (surface) to 50 m (quarter of the maximum water depth) water depths. The nickel concentrations in rain- and snow-water samples retrieved at the lakefront and the wall of the caldera lake were higher than those in the surface lake water (0.3 m) samples. This phenomenon was also observed for the concentrations of vanadium in those water samples. The concentration ratio of vanadium to nickel of the snow sample is comparable in magnitude to the reported values in the particulate matter samples originating from fossil fuel combustion. Anomalously high concentrations of nickel in lake water at the thermocline depth were observed in September of 2007 and 2009. The sedimentation process was considered to be responsible for these phenomena since the density and the coefficient of viscosity increase drastically at the thermocline depth, and they would cause a decrease of the sedimentation velocity of the particulate matter containing nickel. The concentrations of nickel as well as vanadium in the water samples support the possibility of the input of anthropogenically derived particulate matter containing both nickel and vanadium, presumably originating from fossil-fuel combustion, into Lake Mashu.View full abstractDownload PDF (713K) -
Kiyoyuki Egusa, Satoshi Kaneco, Yoshimasa Kondou, Hideyuki Katsumata, ...Article type: Research Papers
2010 Volume 59 Issue 12 Pages 1113-1117
Published: 2010
Released on J-STAGE: January 24, 2011
JOURNAL FREE ACCESSA new preconentration with protein biosorption was developed for graphite furnace atomic absorption spectrometry (GFAAS). Nutrose protein was used for the biosorption. The effect of various factors, such as initial pH of sample solution, stirring time, Nutrose amounts, pyrolysis temperature, atomization temperature and matrix elements, on the absorbance of silver was investigated for the optimization of experimetnal conditions. The optimum pyrolysis temperature and atomization temperature were 350°C and 1400°C, respectively. Under optimum conditions, silver in aqueous sample was concentrated approximately 15.5 fold by the present method. The dynamic range for calibration curve was in the range of 0.1 to 3 ng/mL. The detection limit (3S/N) was approximately 9 pg/mL. The reproducibility for GFAAS with the nutrose biosorption was relative standard deviation (RSD) 5.6% with Ag 1.0 ng/mL sample solution for seven measurements. Even through matrix elements existed in 103 fold excess in water, the silver biosorption was not affected by the matrix elements. The present method was applied into the determination of silver in environmenal samples. The recovery of spiked silver was in the satisfiable range.View full abstractDownload PDF (532K) -
Yoko Tomita, Yoshihiro Mihara, Shunitz TanakaArticle type: Research Papers
2010 Volume 59 Issue 12 Pages 1119-1123
Published: 2010
Released on J-STAGE: January 24, 2011
JOURNAL FREE ACCESSA determination method for polycyclic aromatic hydrocarbons (PAHs) in sediment samples was investigated on the basis of HPLC with fluolesence detection after the extraction of PAHs from sediment with sodium dodecyl sulfate (SDS), followed by the phase separation of an SDS-rich phase from water with HCl. The concentration of SDS for extraction, the concentration of HCl and the temperature for phase separation were investigated and optimized. The accumulation efficiency of PAHs was estimated by measuring the concentration of Quinizarine Green SS before and after phase separation. In the optimized condition, 0.1 M SDS, 4 M HCl, 60°C and 90 min for phase separation, the recovery ratio of antracene, fluoranthene and pyrene from a model sediment sample was more than 95% and the accumulation times were about 10. The proposed method was applied to sediment sample collected from the Songhua river in China ; the concentrations of antracene, fluoranthene and pyrene in the sediment were 80 μg/kg, 230 μg/kg and 220 μg/kg, respectively.View full abstractDownload PDF (498K)
Notes
-
Takashi Yamamoto, Isao Kurotani, Ayumi Yamashita, Jun Kawai, Shoji Ima ...Article type: Notes
2010 Volume 59 Issue 12 Pages 1125-1131
Published: 2010
Released on J-STAGE: January 24, 2011
JOURNAL FREE ACCESSThe elemental analysis of a 1M hydrochloric acid leaching solution from soil samples in the mountain district of Shikoku was carried out by a portable liquid electrode plasma (LEP) atomic emission spectrometer. The contents of Na, K, Ca, Mg, Mn, and Fe were determined, and compared with those by flame photometry, flame atomic absorption spectrometry, ICP-MS and ICP-AES. The 600 V of the applied voltage was found to be suitable for the present sample solution at the use of a sample holder made of resin. The precision of the emission intensities for iterative measurements was improved by a normalization procedure with an emission line from the atomic hydrogen, and the relative standard deviations were ca. 20%. Results of quantitative analysis of soil-extracts by LEP atomic emission spectrometry were discussed based on geological data around the sampling area.View full abstractDownload PDF (809K) -
Shigeru Taguchi, Ayako Fujii, Takashi Okoshi, Hideki Kuramitz, Noriko ...Article type: Notes
2010 Volume 59 Issue 12 Pages 1133-1136
Published: 2010
Released on J-STAGE: January 24, 2011
JOURNAL FREE ACCESSThe photo-oxidation of Cr(III) to Cr(VI) with OH radicals formed under the irradiation of vacuum ultraviolet (VUV) was applied to the successive determination of Cr(VI) and total chromium by FIA. A sample solution containing Cr(III) was introduced into a quartz tube contacted to a VUV lamp radiating the light of 185 nm and 254 nm. Chromium(III) was oxidized to Cr(VI) quantitatively while passing through the quartz tube. The Cr(VI) was converted into a colored species with diphenylcalbazide in a reaction coil and the colored species was detected with an UV detector. For a sample solution containing Cr(III) and Cr(VI), without VUV irradiation, only Cr(VI) was determined. On the other hand, under VUV irradiation the total concentration of chromium, that is Cr(III) plus Cr(VI), was determined. The speciation of Cr(III) and Cr(VI) was easily performed by on/off switching the VUV lamp. Linear calibration was obtained at 0.05 – 1.0 mg dm−3 for both Cr(III) and Cr(VI). More than four samples were analyzed in one hour. This technique was successfully applied to synthesized plating wastewater.View full abstractDownload PDF (549K) -
Masami Kanao Koshikawa, Mirai Watanabe, Hiroshi Koshikawa, Kazuhiro Ko ...Article type: Notes
2010 Volume 59 Issue 12 Pages 1137-1142
Published: 2010
Released on J-STAGE: January 24, 2011
JOURNAL FREE ACCESSSpeciation of aluminum (Al), including inorganic monomeric Al (Ali, the sum of aquo, hydroxy, and inorganically complexed forms), organic monomeric Al (Alo, the organically complexed form), and colloidal mineral Al (Alc, the fine particulate form that passes through a 0.4-μm pore size membrane filter), was investigated in circumneutral (pH 7–9) eutrophic Lake Kasumigaura, Japan. The mean concentrations calculated from the result of monthly observations during the period from January to December 2003 were compared among ten stations. Ali decreased downstream from the mouth of the influent rivers (0.07–0.10 μM) to the mouth of the effluent river (0.03 μM). Alc, which also decreased downstream (from 0.11 to 0.06 μM), was the major fraction (>50%) of total dissolved Al at all stations. Alo remained around 0.02 μM at all stations. In Lake Kasumigaura, a high concentration of Si (average 0.23 mM) seems to be involved in the removal of Ali and formation of Alc. Also, a high concentration of Ca (ave. 0.43 mM) seems to be acting as a competitive cation for complexation with a high concentration of dissolved organic carbon (ave. 0.26 mM), and inhibit the formation of Alo.View full abstractDownload PDF (564K) -
Masahiro Maruo, Kazuki Nagaoka, Issei Kobayashi, Kanako Kozawa, Hajime ...Article type: Notes
2010 Volume 59 Issue 12 Pages 1143-1147
Published: 2010
Released on J-STAGE: January 24, 2011
JOURNAL FREE ACCESSThe pH conditions for the colorimetric determination of Fe(II) in oxic natural water samples were reexamined for analyses using PDTS (ferrozine) or bathophenanthroline disulfonic acid salt for the fixation of Fe(II) onboard a boat without an electricity supply. Bathophenanthroline disulfonic acid salt enhanced the reduction of Fe(III) to Fe(II), and produced an overestimation of the Fe(II) concentration in the water of a natural lake. PDTS enhanced the reduction of Fe(III) at pH 4.0, but showed almost no reduction of Fe(III) at pH 6.8. Oxidation of Fe(II) was observed at pH 9.0. PDTS at pH 6.8 showed no variation in Fe redox speciation in water within 30 h. As analyzed in the field onboard a boat, the Fe(II) concentration of a Japanese lake was measured by using the latter conditions with a solid-phase Fe(II)-ferrozine complex. Under irradiation with sunlight, the formation of Fe(II) on the lake surface was observed during the daytime. In contrast, the Fe(II) concentration in another lake that received no sunlight did not show a significant change within 6 h of sampling. This finding suggests that a portion of Fe(II) is stabilized by complexation with ligands present in the water. This estimate is supported by the difference between the Fe(II) concentration of identical river water samples measured using this method (26 nmol L−1) and chemiluminescence (0.8 nmol L−1).View full abstractDownload PDF (564K) -
Hiroki Karasawa, Masae Kimura, Chiharu Wakuda, Michiko K. Kurihara, Ka ...Article type: Notes
2010 Volume 59 Issue 12 Pages 1149-1154
Published: 2010
Released on J-STAGE: January 24, 2011
JOURNAL FREE ACCESSSimultaneous determination method for 12 volatile halogenated organic compounds (VHOCs) in brackish water and seawater has been developed, based on purge and trap-gas chromatography/mass spectrometry. The limits of detection for VHOCs were <0.04 pmol L−1 for bromomethane, iodoethane and tribromomethane, <0.13 pmol L−1 for bromochloromethane, chloroiodomethane, chlorodibromomethane and bromoiodomethane, <0.21 pmol L−1 for chloromethane, dibromomethane, bromodichloromethane, and diiodomethane and 0.67 pmol L−1 for iodomethane. Good linearities of the calibration curves for 12 VHOCs were obtained in the concentration range up to100 pmol L−1. The correlation coefficients were >0.997 for bromochloromethane, chlorodibromomethane, bromodichloromethane, bromoiodomethane and tribromomethane, >0.981 for chloromethane, iodomethane, iodoethane, chloroiodomethane and diiodomethane, 0.967 for dibromomethane and 0.923 for bromomethane. Using this developed method, the concentrations of VHOCs in brackish water, coastal seawater and open ocean seawater were measured. The coefficients of variation were approximately <20% in all samples. Thus, this simultaneous highly sensitive analysis method was valuable for determination of trace levels of VHOCs concentrations in natural water.View full abstractDownload PDF (435K) -
Shogo Sugahara, Tatsuya Yurimoto, Kazuhiro Ayukawa, Katsunori Kimoto, ...Article type: Notes
2010 Volume 59 Issue 12 Pages 1155-1161
Published: 2010
Released on J-STAGE: January 24, 2011
JOURNAL FREE ACCESSWe developed a simple in situ extraction method for dissolved sulfide (H2S, HS−, S2−) in sandy mud sediments. All analytical procedures were performed in a sealed system of glass syringes to prevent the volatilization of hydrogen sulfide and the oxidation of sulfide by air. An adequate amount of sandy mud sediment was put in a graduated glass syringe on site immediately after sampling. This procedure was performed using a unique and useful tool ; a plastic syringe had its front portion cut, so as to avoid the attachment of sediment to the inside wall of the syringe. To the sediment sample in the syringe, distilled water, deoxygenated by babbling with nitrogen gas, was injected via a three-way stopcock with another syringe. After mixing well, the sample was filtrated into the other syringe through a filter (0.45 μm). In addition, zinc acetate solution was added to the filtrate in the syringe, and was then spectrophotometrically determined by the methyleneblue method after being brought back to laboratory. The proposed method was successfully applied to bottom sediment samples taken from northeast of Ariake Bay. A high concentration of dissolved sulfide was detected in a warmer season. This method should be useful to evaluate sediment quality and to assess the influence of dissolved sulfide on benthos such as bivalves.View full abstractDownload PDF (533K) -
Hiroaki Minamisawa, Kento Mizushima, Hiromichi Asamoto, Mayumi Minamis ...Article type: Notes
2010 Volume 59 Issue 12 Pages 1163-1167
Published: 2010
Released on J-STAGE: January 24, 2011
JOURNAL FREE ACCESSChromium exists widely in nature as both trivalent and hexavalent forms. Although, Cr(III) is an essential element for humans at trace levels, Cr(VI) has great toxicity and carcinogenicity at low concentrations. Cr(VI) is typically present in aqueous solutions, such as CrO42− anion. Polyurethane foam (PUF) was impregnated with hydrochroric acid (HCl-PUF) and then used to remove Cr(VI) from environmental water samples. However, Cr(VI) was not adsorbed on PUF, Cr(VI) was adsorbed on HCl-PUF. In this study, the adsorption conditions of Cr(VI) on HCl-PUF were investigated, such as the adsorption time and the solution pH. Further, the deadsorption conditions of Cr(VI) from HCl-PUF were investigated, such as the kind of eluents and their concentrations. Cr(VI) was quantitatively adsorbed on HCl-PUF at a pH range 3.0-8.0 from aqueous solutions and their adsorption isotherms were fitted by the Freundlich equation. The Cr(VI) adsorbed on HCl-PUF as eluted with 3.0 mol dm−3 nitric acid. The property of HCl-PUF was extended to the preconcentration and determination of trace amounts of Cr(VI) in water samples by Inductively Coupled Plasma Emission Spectrometry (ICP-AES).View full abstractDownload PDF (478K)
Analytical Reports
-
Noriko Tomioka, Kazuhiro Komatsu, Masami Kanao Koshikawa, Akio Imai, K ...Article type: Analytical Reports
2010 Volume 59 Issue 12 Pages 1169-1174
Published: 2010
Released on J-STAGE: January 24, 2011
JOURNAL FREE ACCESSIn order to learn about the environmental conditions of Lake Kasumigaura, National Institute for Environmental Studies has been pursued in a limnological survey of the Lake monthly from 1977. The concentrations of copper and iron in surface water of Lake Kasumigaura were monitored at five sites from 1989. The concentrations of copper were about 0.6-1 μg L−1 for St. 1, 3, 9 and 12, whereas they were 0.8-1.4 μg L−1 for St. 7. This similarity may be due to the formation of a stable soluble complex species, and also small variations of the copper concentrations in inflowed rivers. The seasonal changes in the copper concentrations became unclear in the middle 1990s. The iron concentrations in the Lake were lower than 10 μg L−1, except those at St. 1. It seems that most of the iron is supplied from rivers, and it precipitates at the river-mouth region. The concentrations of iron at St. 1 were 50 μg L−1 before the early 1990s, whereas they became 20 μg L−1 after the late 1990s. Although the reasons for the changes in the late 1990s are very complicated, the change in the surface level of the lake water, by controlling the Hitachi River Watergate, which started in 1996, may be one of the reasons. The surface level of the lake water became 30 cm higher after control of the Watergate ; this may have moved the sedimentation-active river-mouth area to the upper side of the lake.View full abstractDownload PDF (814K)
- |<
- <
- 1
- >
- >|