The biosynthetic pathways of natural products are complicated, and it is difficult to fully elucidate their details using experimental chemistry alone. In recent years, efforts have been made to elucidate the biosynthetic reaction mechanisms by combining computational and experimental methods. In this review, we will discuss the biosynthetic studies using computational chemistry for various terpene compounds such as cyclooctatin, sesterfisherol, quiannulatene, trichobrasilenol, asperterpenol, preasperterpenoid, spiroviolene, and mangicol.

Lipid nanoparticles (LNPs), used for mRNA vaccines against severe acute respiratory syndrome coronavirus 2, protect mRNA and deliver it into cells, making them an essential delivery technology for RNA medicine. The LNPs manufacturing process consists of two steps, the upstream process of preparing LNPs and the downstream process of removing ethyl alcohol (EtOH) and exchanging buffers. Generally, a microfluidic device is used in the upstream process, and a dialysis membrane is used in the downstream process. However, there are many parameters in the upstream and downstream processes, and it is difficult to determine the effects of variations in the manufacturing parameters on the quality of the LNPs and establish a manufacturing process to obtain high-quality LNPs. This study focused on manufacturing mRNA-LNPs using a microfluidic device. Extreme gradient boosting (XGBoost), which is a machine learning technique, identified EtOH concentration (flow rate ratio), buffer pH, and total flow rate as the process parameters that significantly affected the particle size and encapsulation efficiency. Based on these results, we derived the manufacturing conditions for different particle sizes (approximately 80 and 200 nm) of LNPs using Bayesian optimization. In addition, the particle size of the LNPs significantly affected the protein expression level of mRNA in cells. The findings of this study are expected to provide useful information that will enable the rapid and efficient development of mRNA-LNPs manufacturing processes using microfluidic devices.

Three neo-clerodane diterpenoids, including two new tinocordifoliols A (1) and B (2) and one known tinopanoid R (3), were isolated from the ethyl acetate-soluble fraction of the 70% ethanol extract of Tinospora cordifolia stems. The structures were elucidated by various spectroscopic methods, including one dimensional (1D) and 2D-NMR, high resolution-electrospray ionization (HR-ESI)-MS, and electronic circular dichroism (ECD) data. The T. cordifolia extract and all isolated compounds 1–3 possessed arginase I inhibitory activities. Among them, 3 exhibited moderate competitive inhibition of human arginase I (IC₅₀ = 61.9 µM). Furthermore, docking studies revealed that the presence of a β-substituted furan in 3 may play a key role in the arginase I inhibitory activities.

Iridoids, which are a class of monoterpenoids, are attractive synthetic targets due to their diversely substituted cis-fused cyclopenta[c]pyran skeletons. Additionally, various biological activities of iridoids raise the value of synthetic studies on this class of compounds. Here, our synthetic efforts toward 11-noriridoids; (±)-umbellatolide B (6), (±)-10-O-benzoylglobularigenin (9) and 1-O-pentenylaucubigenin (34) are described. For the efficient synthesis of target compounds, common synthetic intermediates (tricyclic enones 17 and 26) were prepared by the Pauson–Khand reaction. The cleavage of the acetal bond on the tricyclic enones and 1,2-reduction introduced the two hydroxy groups on the cyclopentane ring of the core scaffold. Furthermore, the C3–C4 olefin part was constructed by the syn-elimination of a thiocarbonate moiety to obtain 34. The developed synthetic routes for 6, 9, and 34 will be useful for the preparation of iridoid analogs that have a polyfunctionalized core skeleton.

Biosynthetic intermediates of siderophore vibrioferrin (VF), O-citryl-L-serine, 2-aminoethyl citrate, and alanine-2-amidoethyl citrate were respectively synthesized as a mixture of stereoisomers. These compounds were used as substrates for enzyme reactions using recombinant PvsA, PvsB, and PvsE proteins as corresponding enzyme equivalents. The results of our study show that each enzyme reacts with a respective substrate and produces VF along the proposed biosynthetic pathway. Furthermore, the results of this study will contribute to the understanding of VF biosynthetic enzymes and may help in the development of antimicrobial drugs by inhibiting siderophore biosynthetic enzymes.

Dihydrobenzofuran is an important skeleton for bioactive compounds and natural products. Hydroquinones can be easily modified into substituted hydroquinones, which effectively undergo oxidation to produce the corresponding benzoquinone derivatives. Benzoquinones are reactive electrophiles that are frequently utilized in coupling with olefins to dihydrobenzofurans. Herein, we report the one-pot oxidative coupling of hydroquinones bearing an electron-withdrawing group at the C2 position with olefins to dihydrobenzofurans in the presence of the Lewis acidic FeCl₃ and 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) oxidant. Furthermore, this method was applied to the oxidative coupling of N-electron-withdrawing group-substituted 4-aminophenol.

We report the first total synthesis of silybin A (1). Key synthetic steps include the construction of the 1,4-benzodioxane neolignan skeleton, a modified Julia–Kocienski olefination reaction between m-nitrophenyltetrazole sulfone (m-NPT sulfone) 10 and aldehyde 21, the formation of the flavanol lignan skeleton 28 via a quinomethide intermediate under acidic conditions, and stepwise oxidation of the benzylic position of flavanol 29.

In Vietnam, the stems and roots of the Rutaceous plant Paramignya trimera (Oliv.) Burkill (known locally as “Xáo tam phân”) are widely used to treat liver diseases such as viral hepatitis and acute and chronic cirrhosis. In an effort to search for Vietnamese natural compounds capable of inhibiting coronavirus based on molecular docking screening, two new dimeric coumarin glycosides, namely cis-paratrimerin B (1) and cis-paratrimerin A (2), and two previously identified coumarins, the trans-isomers paratrimerin B (3) and paratrimerin A (4), were isolated from the roots of P. trimera and tested for their anti-angiotensin-converting enzyme 2 (ACE-2) inhibitory properties in vitro. It was discovered that ACE-2 enzyme was inhibited by cis-paratrimerin B (1), cis-paratrimerin A (2), and trans-paratrimerin B (3), with IC₅₀ values of 28.9, 68, and 77 µM, respectively. Docking simulations revealed that four biscoumarin glycosides had good binding energies (∆G values ranging from −10.6 to −14.7 kcal/mol) and mostly bound to the S1′ subsite of the ACE-2 protein. The key interactions of these natural ligands include metal chelation with zinc ions and multiple H-bonds with Ser128, Glu145, His345, Lys363, Thr371, Glu406, and Tyr803. Our findings demonstrated that biscoumarin glycosides from P. trimera roots occur naturally in both cis- and trans-diastereomeric forms. The biscoumarin glycosides Lys363, Thr371, Glu406, and Tyr803. Our findings demonstrated that biscoumarin glycosides from P. trimera roots hold potential for further studies as natural ACE-2 inhibitors for preventing severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection.

In order to introduce a cost-effective strategy method for commercial scale dry granulation at the early clinical stage of drug product development, we developed dry granulation process using formulation without API, fitted and optimized the process parameters adopted Design of Experiment (DOE). Then, the process parameters were confirmed using one formulation containing active pharmaceutical ingredient (API). The results showed that the roller pressure had significant effect on particle ratio (retained up to #60 mesh screen), bulk density and tapped density. The roller gap had significant influence on particle ratio and specific energy. The particle ratio was significantly affected by the mill speed (second level). The tabletability of the powder decreased after dry granulation. The effect of magnesium stearate on the tabletability was significant. In the process validation study, the properties of the prepared granules met the requirements for each response studied in the DOE. The prepared tablets showed higher tensile strength, good content uniformity of filled capsules, and the dissolution profiles of which were consistent with that of clinical products. This drug product process development and research strategies could be used as a preliminary experiment for the dry granulation process in the early clinical stage.

Alkene dipeptide isosteres (ADIs) are promising surrogates of peptide bonds that enhance the bioactive peptide resistance to enzymatic hydrolysis in medicinal chemistry. In this study, we investigated the substitution effects of an ADI on the energy barrier of cis–trans isomerization in the acetyl proline methyl ester (Ac-Pro-OMe) model. The (E)-alkene-type proline analog, which favors a cis-amide conformation, exhibits a lower rotational barrier than native Ac-Pro-OMe. A van’t Hoff analysis suggests that the energy barrier is primarily reduced by enthalpic repulsion. It was concluded that although carbon–carbon double bonds and pyrrolidine rings individually increase the rigidity of the incorporation site, their combination can provide structural flexibility and disrupt bioactive conformations. This work provides new insights into ADI-based drug design.