地質学雑誌
Online ISSN : 1349-9963
Print ISSN : 0016-7630
ISSN-L : 0016-7630
118 巻, 4 号
選択された号の論文の6件中1~6を表示しています
論説
  • 川上 源太郎, 小松原 純子, 嵯峨山 積, 仁科 健二, 廣瀬 亘, 大津 直, 木村 克己
    2012 年118 巻4 号 p. 191-206
    発行日: 2012/04/15
    公開日: 2012/09/27
    ジャーナル フリー
    北海道当別町川下地区で掘削した沖積層ボーリングコア(GS-HTB-1,-2)は,堆積相,珪藻化石および14C年代に基づくと,下位より礫質河川堆積物(ユニット2:深度50.7~45.0 m),蛇行河川の堆積物(ユニット3:深度45.0~22.4 m),内湾の堆積物(ユニット4:深度22.4~8.6 m),河川および塩水湿地の堆積物(ユニット5:深度8.6~1.5 m)からなる.ユニット4上部からユニット5にかけての上方浅海化は,湾頭デルタのプログラデーションを示す.沖積層の下位には,上部更新統の氾濫原堆積物(ユニット1:深度55.0~50.7 m)が確認された.堆積物物性・粒度組成は層相とよく一致した.また堆積物懸濁液のpH・ECの値は堆積環境の解釈と対応し,堆積場における塩分を反映することが示唆された.堆積曲線を用いて堆積システムの変遷とその時期,および海水準変動との関係を議論した.
  • 植木 忠正, 原山 智
    2012 年118 巻4 号 p. 207-219
    発行日: 2012/04/15
    公開日: 2012/09/27
    ジャーナル フリー
    白亜紀~古第三紀の火成活動で形成された多斑晶質の流紋岩,およびそれと関連した花崗岩は西南日本内帯に広く分布する.本研究ではこれらの多斑晶質の特徴に着目し,その活動地域の一つである北アルプス北東部・仁科山地に分布する白亜紀後期の多斑晶質流紋岩・木崎流紋岩と,関連した花崗岩である花崗斑岩~斑状花崗岩の青木花崗岩を対象に,マグマの性質(温度, 生成初期の含水量)の検討を行った.マグマの情報を残存する急冷周縁相の花崗斑岩を用い,地質温度計とMELTS プログラムによる解析を行った結果,一般的な珪長質マグマよりも高温で水に乏しい(850~900 ℃, H2O = 0.4~1.0 wt.%)というマグマの性質が明らかになった.この結果は,西南日本内帯に広く分布する同様の特徴をもつ多斑晶質の流紋岩も同様のマグマから生成され,白亜紀後期のユーラシア大陸縁辺では高温で水に乏しい火成活動が活発に起こっていた可能性を示唆している.
  • 池田 倫治, 後藤 秀昭, 堤 浩之, 露口 耕治, 大野 裕記, 西坂 直樹, 小林 修二
    2012 年118 巻4 号 p. 220-235
    発行日: 2012/04/15
    公開日: 2012/09/27
    ジャーナル フリー
    本研究では,四国西部の中央構造線活断層系伊予断層を対象にトレンチ調査を実施し,完新世の3回の活動時期を明らかにした.伊予断層の最新活動時期はAD1650以降であり,ひとつ前の活動時期はBC 2865-BC 845である.また,それ以前の23440yr BP-BC4850の間に少なくとも1回の活動があったと考えられる.これらの活動時期から伊予断層の活動間隔を算出すると,2000年より長いことになる.本研究の結果と伊予断層に並走する本郡断層でこれまでに明らかにされている活動時期とを対比したところ,伊予断層のひとつ前の活動時には両断層は同時に活動した可能性が高い.
ノート
  • 鈴木 和博, 三村 耕一
    2012 年118 巻4 号 p. 236-239
    発行日: 2012/04/15
    公開日: 2012/09/27
    ジャーナル フリー
    Conodont elements in limestone are generally collected from acid-insoluble residues by using heavy solutions (e.g., bromoform). To avoid the use of harmful heavy solutions, we have developed a new method of identifying conodont elements in limestone. Acid-insoluble residues were obtained by treating limestone samples with 10% acetic acid solution. The collected residues were then soaked in a 10% acetic acid solution containing 0.1 wt.% Alizarin Red S for 5 days. Apatite (conodont elements, pellet pieces, abiotic apatite minerals, etc.) in the residues was stained a color between orange and light red, enabling it to be easily distinguished from other minerals. This method enables conodont elements to be collected from limestone samples effectively and safely.
  • 坂口 有人, 向吉 秀樹
    2012 年118 巻4 号 p. 240-244
    発行日: 2012/04/15
    公開日: 2012/09/27
    ジャーナル フリー
    Vitrinite reflectance geothermometer was originally developed for use in oil exploration, but it has various applications; e.g., estimating the depth of burial in sedimentary basins, analysis of the thermal structure of accretionary complexes, and detecting evidence of frictional heat in fault rocks. However, use of the vitrinite reflectance geothermometer is not widespread. This paper describes a modified apparatus that was specifically designed to analyze small vitrinite particles in accretionary complexes and fault rocks. The original apparatus was designed to illuminate large coal samples over a wide field of view (>100 μm), and measured reflectance with a high-voltage photomultiplier. A wide field of illumination is required for petrographic identification of vitrinite; however, reflections from other bright minerals around the small vitrinite particles generate a high level of background noise. The apparatus described here has a dual illumination system: a homogeneous beam illuminates a wide field of view to allow identification of vitrinite, and a concentrated spot beam of only 1.6 μm diameter is used to measure reflectance. The spot illumination system measures reflectance with a semiconductor photodiode sensor. The avalanche-type photodiode has a sensor cooling system, provides high-resolution, low-noise reflectance measurements, and is simpler to use than the photomultiplier.
口絵
feedback
Top