電気学会論文誌D(産業応用部門誌)
Online ISSN : 1348-8163
Print ISSN : 0913-6339
ISSN-L : 0913-6339
125 巻, 9 号
選択された号の論文の10件中1~10を表示しています
論文
  • 田中 康司, 三木 一郎
    2005 年 125 巻 9 号 p. 833-838
    発行日: 2005年
    公開日: 2005/12/01
    ジャーナル フリー
    Drive of permanent magnet synchronous motor (PMSM) requires the rotor position information to control the motor torque, and they are generally detected by mechanical position sensor such as an encoder or a resolver. However, these sensors increase the machine size and the cost of drive, and reduce reliability of the system. Therefore, many papers about position sensorless drive method of PMSM have been published. This paper presents a position sensorless control of interior permanent magnet synchronous motor (IPMSM). A mathematical model of IPMSM using an extended electromotive force (EMF) in the rotating reference frame is utilized to estimate the rotor speed and position. This model has a simple structure integrating position information into an extended EMF term. Therefore, the sensorless control based on the mathematical motor model can be simply implemented. The estimation method proposed is based on the principle that the error of the current is proportional to that of extended EMF. This method was carried out using a 6-pole, 400W, 1750r/min test motor system. As a result, the sensorless speed control was achieved from 80r/min to 1800r/min under 0-100% loads.
  • 森貞 晃, 小林 孝之, 蓬原 弘一
    2005 年 125 巻 9 号 p. 839-846
    発行日: 2005年
    公開日: 2005/12/01
    ジャーナル フリー
    In this paper, construction logic of a man/machine safety work system is presented. Especially in a system where the human and machine cooperatively work on the time axis, safety assurance requires the human and machine to maintain different positions or states. A control of this positional relationship or state change is defined as block section control. In Chapter 3, the safety of the platform door system composed of train doors and platform doors is discussed. These systems are characteristic in that it has two or more safe areas and that its hazardous area change to safety area. The concept of the man/machine safety work system is applied to the station platform door system, and the conditions for assuring the safety of the control the station platform door system are derived.
  • 茂木 尚, 中原 明仁, 高橋 和彦, 井出 一正, 開道 力, 金田 潤也, 服部 憲一, 渡辺 孝, 峰松 英資, 半澤 和文
    2005 年 125 巻 9 号 p. 847-853
    発行日: 2005年
    公開日: 2005/12/01
    ジャーナル フリー
    This paper presents core loss evaluation of turbine generator model stator. The stator configuration does not make magnetic flux distribution uniform, and the induction harmonics make the core loss calculation difficult. In this evaluation, the core losses are measured by rotating stator torque.
    As a result of the measurements, a half-lap-stacked stator obtains lower core losses and larger percentage of eddy current losses than a block-stacked stator. In addition, a gap between each segment makes in-plane eddy current loss increase.
  • 野口 季彦, 高田 陽介, 山下 幸生, 小松 喜美, 茨木 誠一
    2005 年 125 巻 9 号 p. 854-861
    発行日: 2005年
    公開日: 2005/12/01
    ジャーナル フリー
    This paper describes an ultra high-speed permanent-magnet synchronous motor drive, which is embedded in a turbocharger of an internal-combustion engine. The electrical drive makes it possible to enhance output power of the turbocharger in a motoring mode and to retrieve combustion energy from exhaust gas in a regenerating mode. Computer simulations and experimental tests are conducted to examine various operation characteristics of a prototype. The experimental data demonstrate 220000-r/min operation at 2.2-kW inverter output power, which agree with the simulation results well and prove feasibility of the proposed system.
  • 山下 桜子, 岩田 雅史, 匹田 志朗, 駒谷 喜代俊
    2005 年 125 巻 9 号 p. 862-870
    発行日: 2005年
    公開日: 2005/12/01
    ジャーナル フリー
    The multi-car elevator system in which two or more cages run at one shaft will be one of the elevator systems in the near future, in order to solve increase of the traffic demand in high-rise buildings.
    In this paper, we propose the calculation method of handling capacity for multi-car elevator systems two cages run at one shaft, or two or more cages run in the same direction at a loop-type shaft, in consideration of the position of cages in the same shaft. And we propose the design method for multi-car elevator systems, which decides the required number of cages, branches and shafts to meet the traffic demand. Moreover, we compare handling capacity of multi-car elevators and investigate optimal elevator facilities for high-rise buildings.
  • —パラメータ変動の考慮—
    原 進
    2005 年 125 巻 9 号 p. 871-878
    発行日: 2005年
    公開日: 2005/12/01
    ジャーナル フリー
    The author's previous study proposed an efficient design method of time-varying gain type controller and its application to the positioning control of vibration systems. The responses of this method become similar to the responses of conventional nonstationary optimal regulators (NORs). This method calculates a time-varying Riccati equation and the responses of a controlled object simultaneously. Moreover, this study utilizes the random search technique for the tuning of the time-varying weights in the Riccati equation and realizes the efficient controller design under many control constraints. Following the previous study, this paper improves the previous method by taking the influences of parameter variations into account. This paper demonstrates an algorithm for the case which includes mass and friction variations. The effectiveness of the algorithm is verified by numerical calculations. Moreover, this paper also discusses some experimental investigation. Different from the use of NOR, the time-varying gains in this experiment are obtained by real-time computations.
研究開発レター
feedback
Top