-
MASARU ISHIDA, JUNICHI SATO
1984Volume 17Issue 3 Pages
231-236
Published: June 20, 1984
Released on J-STAGE: April 19, 2006
JOURNAL
FREE ACCESS
A compact but powerful chemical process system simulator called SCHEMER (Structured CHEMosynthesizER) is developed by focusing attention on the analogy between chemical processing and data processing.
Introduction of the concept of the stream stack has released the SCHEMER compiler from management of the stream numbers, affording high performance per unit byte of memory.
Since SCHEMER is an adaptable computer language in which special commands concerning chemical processing are added to the regular commands for data processing, the user may use both. Moreover, he may compose new commands by combining some of those commands and even newly composed ones. Such structured flowsheeting dramatically increases the productivity of the simulator.
View full abstract
-
XI-YIN ZHENG, SHOGO YAMAMOTO, HIDETO YOSHIDA, HIROKATSU MASUOKA, MASAH ...
1984Volume 17Issue 3 Pages
237-245
Published: June 20, 1984
Released on J-STAGE: April 19, 2006
JOURNAL
FREE ACCESS
A coaxial cylindrical cell was constructed for measuring thermal conductivities of nine pure fluids (argon, nitrogen, oxygen, helium, carbon dioxide, methane, ethane, ethylene and propane) at temperatures ranging from 25 to 76°C under pressures up to 17.5 MPa. Thermal conductivities of two binary mixtures (argon-nitrogen and methane-ethylene) were also measured at 30.6, 50.6 and 76.6 °C under pressures up to 9.8 MPa. The apparatus was calibrated with eight kinds of gases.
The Stiel-Thodos and Crooks-Daubert correlations were applied to predict the effect of pressure on the thermal conductivity of pure fluids. They were also extended to the mixtures by use of the van der Waals one-fluid model. Fairly good agreement was obtained with the experimental data as well as those from the literature except in the vicinity of the critical region.
View full abstract
-
TAKAO TSUKADA, MITSUNORI HOZAWA, NOBUYUKI IMAISHI, KATSUHIKO FUJIKAWA
1984Volume 17Issue 3 Pages
246-251
Published: June 20, 1984
Released on J-STAGE: April 19, 2006
JOURNAL
FREE ACCESS
Deformation of moving drops and bubbles in a quiescent liquid was studied theoretically by use of the finite element method. In the analyses, triangular elements were used, where velocity vectors and pressure were discretized by biquadratic and bilinear trial functions respectively, and the shape of the interface was expressed by the Hermite cubic trial function.
For rising bubbles, the experimental results of Tadaki and Maeda on deformation and drag coefficients are explained by numerical simulations. For the deformation of drops, the numerical analyses agree well with the experimental results of Wellek
et al.
View full abstract
-
EIZO SADA, SHIGEO KATOH, HIDEHUMI YOSHII, AKIO NAKANISHI
1984Volume 17Issue 3 Pages
252-255
Published: June 20, 1984
Released on J-STAGE: April 19, 2006
JOURNAL
FREE ACCESS
Rates of chlorination of methane in the ternary salt KCl-ZnCl
2-CuCl
2 were measured in a bubble column. The data were analyzed with the use of correlations for ε
G and k
La of the bubble column and the theory of gas absorption with a rapid reaction.
View full abstract
-
TAKEICHIRO TAKAMATSU, IORI HASHIMOTO, MASAHIRO KINOSHITA
1984Volume 17Issue 3 Pages
255-261
Published: June 20, 1984
Released on J-STAGE: April 19, 2006
JOURNAL
FREE ACCESS
A powerful new simulation procedure is developed for the multistage water/hydrogen exchange column for heavy water enrichment. In comparison with the distillation column, the exchange column considered here has several specific features such as the presence of three streams (liquid water, water vapor and hydrogen gas), occurrence of isotopic exchange reactions and much more complex column configuration comprising two different kinds of stages, a catalytic oxidizer at the top and an electrolytic cell at the bottom. The main calculational loop proposed here is the Newton-Raphson method where the number of independent variables is just equal to the total number of water/vapor scrubbing stages. Unlike the previously reported procedures for the exchange column, the present procedure is applicable even in cases where the deuterium concentration is significantly high, varying greatly from stage to stage within the column.
View full abstract
-
KAZUYUKI SHIMIZU, MASAKAZU MATSUBARA
1984Volume 17Issue 3 Pages
262-269
Published: June 20, 1984
Released on J-STAGE: April 19, 2006
JOURNAL
FREE ACCESS
The perturbed linear system equations for a binary distillation column with pressure variation are derived.
The application of modern control theory to this model shows that there exists a pair of constant precompensator and state variable feedback which completely decouples the system and rejects the effect of the feed composition disturbance. Based on the subspace concept, we found that five state variables have to be measured and three poles can be arbitrarily assigned. If we use the dynamic precompensator, seven poles can be assigned while eight measurement variables are required.
A simulation study was carried out to show the power of the approach.
View full abstract
-
HEUNG CHUL PARK, SHOICHI KIMURA, YUKIO SAKAI, SETSUJI TONE, TSUTAO OTA ...
1984Volume 17Issue 3 Pages
269-275
Published: June 20, 1984
Released on J-STAGE: April 19, 2006
JOURNAL
FREE ACCESS
A numerical method is proposed to predict the transient of exit-gas compositions of a packed bed reactor used for gas-solid reactions. The exit-gas compositions can be predicted directly from the conversion data of a single particle varying with reaction time. Thus, the method presently proposed can be easily applied to systems involving complex reaction behavior due to structural changes of particles.
The procedure is applied to the analysis of experimental data obtained in the oxidation of reduced iron with water vapor. It is verified that the proposed numerical method successfully simulates the behavior of packed beds.
View full abstract
-
TAKEHIKO BABA, MITSUTOSHI NAKAJIMA, SHIGEHARU MOROOKA, HISAYOSHI MATSU ...
1984Volume 17Issue 3 Pages
275-279
Published: June 20, 1984
Released on J-STAGE: April 19, 2006
JOURNAL
FREE ACCESS
A new system was developed to measure the flows of solid particles in fluidized beds. Porous particles, which were coated with a water-soluble fluorescent dye, emitted a strong visible light upon excitation by UV light. The illuminating UV light and the fluorescent visible light passed through clear silica fibers and plastic fibers, respectively. By using bifurcate optical probes and fluorescent tracer particles, pulse response curves at arbitrary locations were demonstratively measured. The output signals were processed by a microcomputer, and flow patterns of solid particles were visualized on CRT. The results show that the present system is useful in many situations of gas-solid contactors requiring observation of particle flows.
View full abstract
-
TAKAMI KAI, SHINTARO FURUSAKI, KAZUMI YAMAMOTO
1984Volume 17Issue 3 Pages
280-285
Published: June 20, 1984
Released on J-STAGE: April 19, 2006
JOURNAL
FREE ACCESS
Methanation of CO in a fluid bed, carried out by Ni catalyst at 573K and atmospheric pressure, was studied experimentally and theoretically. Reaction rates of methanation and the water-gas shift reaction were measured in a fixed bed reactor.
A fluid bed model considering a decrease in number of moles caused by reactions is proposed to analyze the data obtained with a fluid bed reactor of 8.1cm i.d. An effective bubble diameter is introduced as an adjustable parameter in the model. The experimental results are well explained by the model when the bubble diameter is assumed to be 3.6cm.
It is found that the influence of the decrease in number of moles on conversion cannot be ignored in analyzing the fluid-bed reaction data.
View full abstract
-
YOSHISHIGE HAYASHI, EIJI HIRAI
1984Volume 17Issue 3 Pages
286-292
Published: June 20, 1984
Released on J-STAGE: April 19, 2006
JOURNAL
FREE ACCESS
For the design calculation of crossflow dry-cooling towers, it is important to know the net amount of heat transfer. The usual assumption is that the flow is uniform through the tower, particularly the tube side. In this study, when one of the fluids is maldistributed, the effect of maldistribution on heat transfer rates is investigated and when the same heat arrival factor as that obtained by uniform flow is required for the case of maldistributed flow under the same operating conditions, the deviation in the overall conductance between the two cases is discussed under the conditions in which the maximum maldistribution effect occurs.
View full abstract
-
KATSUKI KUSAKABE, TAKESHI KIMURA, SHIGEHARU MOROOKA, YASUO KATO
1984Volume 17Issue 3 Pages
293-297
Published: June 20, 1984
Released on J-STAGE: April 19, 2006
JOURNAL
FREE ACCESS
Electric current densities via different pathways and current efficiencies were evaluated in a bipolar packed bed electrode cell of 0.1m × 0.1m in cross section and 0.2m in height. The particulate electrodes were cylindrical ferrite pellets 6mm in diameter and 6mm long.
The bypass current density was dependent on electrical conductivity of electrolyte, solid holdup, cell configuration and cell voltage. The Faradaic current density under the mass transfer-controlling condition was simulated with the mass transfer coefficient in packed bed, the ratio of effective area to surface area of each pellet, solid holdup and depolarizer concentration. The overall current efficiency was expressed as a function of bypass current density, Faradaic current density and actual current efficiency. Introduction of inert gas bubbles increased the maximum current efficiency by about 15%.
View full abstract
-
KI-SUNG HA, MOTOYUKI SUZUKI
1984Volume 17Issue 3 Pages
297-303
Published: June 20, 1984
Released on J-STAGE: April 19, 2006
JOURNAL
FREE ACCESS
A mathematical model to describe regeneration of spent clinoptilolite by concentrated sodium chloride solution as regenerant was developed and compared with experimental observations. The model is based on solid-phase diffusion in clinoptilolite particles and the equilibrium relation of sodium and ammonium ions. The model predicted the trend observed for both the elution curve of ammonium and the fractional regeneration of the bed.
The results of the model calculation suggest that the concentration of regenerant is one of the controlling factors in determining the regenerant volume and the fractional regeneration. Particle size is also defined as an important design parameter in determining the fractional regeneration and average eluted ammonium concentration or regenerant volume.
View full abstract
-
YASUSHI TAKEUCHI, EIJI FURUYA, HIROSHI IKEDA
1984Volume 17Issue 3 Pages
304-309
Published: June 20, 1984
Released on J-STAGE: April 19, 2006
JOURNAL
FREE ACCESS
To make clear the mechanism of intraparticle diffusion at relatively high concentration ranges, the values of intraparticle diffusivity, D
iq, of tetrahydrofuran (THF) within activated carbon pellets were measured at 308 K by use of two methods, i.e. the steady-state diffusion method and the flow method for fixed-bed adsorption. The two values of D
iq obtained agreed with each other fairly well. Surface and pore diffusivities were calculated from D
iq based on a concept of simultaneous occurrence of transfer through pore spacings and through surfaces. The value of surface diffusivity, D
s, thus calculated was almost equal to those reported for solvent vapor-activated carbon systems in lower concentration ranges. The value of pore diffusivity, D
p, calculated was close to that evaluated from molecular diffusion theory combined with Knudsen diffusion. It became clear that breakthrough curves numerically estimated using the values of D
iq, variable with the change in amount adsorbed, fitted the experimental breakthrough curves more closely than those estimated by use of the values of diffusivity assumed to be constant irrespective of amount adsorbed for specific experimental runs.
View full abstract
-
ISAMI YOSHIFUKU
1984Volume 17Issue 3 Pages
309-315
Published: June 20, 1984
Released on J-STAGE: April 19, 2006
JOURNAL
FREE ACCESS
Flowgraph representation for the solution of a multistage process problem is studied. The flowgraph unit is a graph which consists of vertex and directed edge, respectively, corresponding to variable and calculation technique (equation, matrix, and others). An algorithm for the construction of the overall flowgraph, which consists of all flowgraph units appearing in the problem, is proposed and applied to a multiple-effect evaporator process problem.
The resulting overall flowgraph provides a visual inspection of essential aspects of the problem as well as the difficulty of the solution and calculation scheme. An example of computable flowgraph construction is included.
View full abstract
-
AKIYOSHI SAKODA, MOTOYUKI SUZUKI
1984Volume 17Issue 3 Pages
316-324
Published: June 20, 1984
Released on J-STAGE: April 19, 2006
JOURNAL
FREE ACCESS
Heat transfer in a packed bed of adsorbents is influenced by mass transfer due to adsorption/desorption. As the first step to clarify this phenomenon, axial heat transfer in a packed bed of silica-gel in dynamic equilibrium with air flow containing water vapor was investigated. Moments of heat pulse response curves were employed for the analysis. The first absolute moment and the second central moment were derived theoretically from a model taking into account mass transfer due to adsorption and the axial dispersion of an adsorbable component in the bed. Also, heat pulse responses were experimentally obtained for three levels of water vapor concentrations. Their moments could be appropriately accounted for by the theoretical treatment adopted here. A simplified heat transfer model could be used by defining the apparent parameters including the effects of mass transfer due to adsorption.
View full abstract
-
SHIGEO GOTO, TAKAO SAITO
1984Volume 17Issue 3 Pages
324-327
Published: June 20, 1984
Released on J-STAGE: April 19, 2006
JOURNAL
FREE ACCESS
-
SACHIO FUJINE, KEIICHIRO SAITO, KOREYUKI SHIBA
1984Volume 17Issue 3 Pages
327-329
Published: June 20, 1984
Released on J-STAGE: April 19, 2006
JOURNAL
FREE ACCESS
-
KAZUNARI OHGAKI, TAKAYASU HANAFUSA, YOICHI KANO, TAKASHI KATAYAMA
1984Volume 17Issue 3 Pages
329-331
Published: June 20, 1984
Released on J-STAGE: April 19, 2006
JOURNAL
FREE ACCESS
-
HIDEHARU HIROSUE
1984Volume 17Issue 3 Pages
331-333
Published: June 20, 1984
Released on J-STAGE: April 19, 2006
JOURNAL
FREE ACCESS
-
TERUO TAKAHASHI, ZENNOSUKE TANAKA, AKIRA ITOSHIMA, L. T. FAN
1984Volume 17Issue 3 Pages
333-336
Published: June 20, 1984
Released on J-STAGE: April 19, 2006
JOURNAL
FREE ACCESS
-
EIICHI KUNUGITA, EIZO TAKATSUKI, TAKESHI IKEDA
1984Volume 17Issue 3 Pages
336-339
Published: June 20, 1984
Released on J-STAGE: April 19, 2006
JOURNAL
FREE ACCESS
-
YASUO HATATE, ATSUSHI IKARI, FUMIYUKI NAKASHIO, KAZUO KONDO
1984Volume 17Issue 3 Pages
339-342
Published: June 20, 1984
Released on J-STAGE: April 19, 2006
JOURNAL
FREE ACCESS
-
YOSHINOBU KAWANO, KAZUHITO KUSANO, FUMIYUKI NAKASHIO
1984Volume 17Issue 3 Pages
343-345
Published: June 20, 1984
Released on J-STAGE: April 19, 2006
JOURNAL
FREE ACCESS
-
JAN BANDROWSKI, JERZY RACZEK
1984Volume 17Issue 3 Pages
345-346
Published: June 20, 1984
Released on J-STAGE: April 19, 2006
JOURNAL
FREE ACCESS
-
SHIGERU MATSUMOTO, HIROJI SATO, MUTSUMI SUZUKI, SLRO MAEDA
1984Volume 17Issue 3 Pages
346
Published: June 20, 1984
Released on J-STAGE: April 19, 2006
JOURNAL
FREE ACCESS