巻号一覧
50 巻, 6 号
選択された号の論文の5件中1～5を表示しています
- |<
- <
- 1
- >
- >|
研究論文
-
金枝 敏明, 中村 達哉2000 年 50 巻 6 号 p. 266-271
発行日: 2000年
公開日: 2007/03/30
ジャーナル フリーShearing test of pure aluminum plate has been conducted in order to ascertain lubricant applying effect mechanism proposed before. The specimen plate having the top protruding element with the thin slit was sheared under high normal loads. Boundary lubrication effects of applied material on the shearing force, namely the tangential force, and the sheared surface were determined. Analysis of the tangential force curves demonstrated that the tangential force was composed of three force components: shearing force, friction forces on the slit surface and the surface sheared. The results suggested that the applied materials lessened the friction forces between lamella structure or segment surfaces of the chip and facilitated the shear deformation under the high normal stress in lubricant applying effect cutting.抄録全体を表示PDF形式でダウンロード (478K) -
江藤 武比古2000 年 50 巻 6 号 p. 272-275
発行日: 2000年
公開日: 2007/03/30
ジャーナル フリーLow temperature softening of work hardened Al–1 mass%Mn–1 mass%Mg alloys, containing small and large (Mn, Fe)Al6 dispersed particles (dispersoids) has been studied. Linear work hardening in an early stage of the stress-strain curves has been found to be due to the pile-up of dislocations around the particles and be proportional to the volume fraction of particles. The work hardened materials are easily softened by annealing at a low temperature mainly because of the climbing of Orowan loops around the particles. The softening rate of the specimens containing small patricles is faster than that containing large ones, with the activation energy of more or less 1.5 eV. Finally, the softening rate has been found to be inversely propotional to the forth power of the particle size. It has been suggested that the rate controlling process softening is dislocation pipe diffusion around the particles.抄録全体を表示PDF形式でダウンロード (339K) -
石島 悌, 浦谷 文博, 薦田 俊策, 山崎 清2000 年 50 巻 6 号 p. 276-280
発行日: 2000年
公開日: 2007/03/30
ジャーナル フリーThe simplified determination method of aluminum in aluminum dross was developed and studied. This method applied the electromagnetic induction in conductors placed in the alternating magnetic field. This electromagnetic method allows any person to analyze samples in large amount in a short period of time. Even though there is some error compared to the conventional chemical methods, it is expected to be able to reduce the error by analysing many standard samples. The automatic measurement seems to become possible, if this method is used.抄録全体を表示PDF形式でダウンロード (408K) -
辻野 良二, 森川 勝吉, 大植 義夫, 山口 博, 小川 恒一, 越智 秀2000 年 50 巻 6 号 p. 281-286
発行日: 2000年
公開日: 2007/03/30
ジャーナル フリーThe tensile strength characteristics of friction welded joints of several aluminum alloys (A1050, A2017, A6061) to stainless steel (SUS304) were investigated by statistical analysis such as normal distribution and Weibull distribution. The results are as follows. The joint efficiencies of joints obtained under an optimum welding condition followed by a good joint showed near normal distribution with higher mean value and small dispertion, and furthermore showed a Weibull distribution with large shape parameter and small coefficient of variance. On the other hand, the joint efficiencies of joints obtained under the unsuitable welding condition followed by a poor joint showed a plus or minus distortional distribution with large dispertion and showed a Weibull distribution with small shape parameter and large coefficient of variance. Thus, the optimum welding condition could be obtained in the case of A1050 to SUS304 and A6061 to SUS304, but couldn't be obtained in the case of A2017 to SUS304 in this experiment.抄録全体を表示PDF形式でダウンロード (577K)
連載講座
-
笹嶋 幹雄, 嶋貫 雅一, 小泉 清次2000 年 50 巻 6 号 p. 293-299
発行日: 2000/06/30
公開日: 2021/06/30
ジャーナル フリーPDF形式でダウンロード (17059K)
- |<
- <
- 1
- >
- >|