The uncertainty of the beam quality conversion factor (
kQ,Q0) of standard dosimetry of absorbed dose to water in external beam radiotherapy 12 (JSMP12) is determined by combining the uncertainty of each beam quality conversion factor calculated for each type of ionization chamber. However, there is no guarantee that ionization chambers of the same type have the same structure and thickness, so there may be individual variations. We evaluated the uncertainty of
kQ,Q0 for JSMP12 using an ionization chamber dosimeter and linear accelerator without a specific device or technique in consideration of the individual variation of ionization chambers and in clinical radiation field. The cross calibration formula was modified and the beam quality conversion factor for the experimental values [(
kQ,Q0)
field] determined using the modified formula. It’s uncertainty was calculated to be 1.9%. The differences between (
kQ,Q0)
field of experimental values and
kQ,Q0 for Japan Society of Medical Physics 12 (JSMP12) were 0.73% and 0.88% for 6- and 10-MV photon beams, respectively, remaining within ± 1.9%. This showed
kQ,Q0 for JSMP12 to be consistent with (
kQ,Q0)
field of experimental values within the estimated uncertainty range. Although inter-individual differences may be generated, even when the same type of ionized chamber is used,
kQ,Q0 for JSMP12 appears to be consistent within the estimated uncertainty range of (
kQ,Q0)
field.
抄録全体を表示