Potato tuber is a highly nutritious, wherein genotype and environmental differences are known to exist in the shape, size and nutritional value of potatoes. Owing to its high consumption, potato could be an ideal carrier of health-promoting phytochemicals. Potato cultivars contain many bioactive lipidic compounds such as fatty acids, glycolipids, phospholipids, sterols, tocols and carotenoids, which are highly desirable in diet because of their health-promoting effects. In the scientific literature, information on the content and profile of bioactive lipidic compounds in potato cultivars are few. The concentration and stability of bioactive lipids are affected by many factors such as genotype, agronomic factors, postharvest storage, cooking and processing conditions. In this review levels and composition of bioactive lipids in terms of lipid classes, fatty acids, phytosterols, tocopherols, and caroteinoids distribution in different potato cultivars including genetically modified potato (GMP) were highlighted and discussed. In addition, factors affecting bioactive lipids levels, stability and health benefits are reviewed. In consideration of potential nutritional value, detailed knowledge on lipids of potato cultivars is of major importance.
Keeping in view the versatile applications of castor oil in cosmetic, pharmaceutical and recently as renewable source, the present work is a step towards the commercialization of castor on large scale in Pakistan. The current study introduces a castor variety with high oil content. Initially seeds were physically examined for some physical parameters. Seed moisture, ash content and linear dimensions such as length, width and thickness were found to be 4.53%, 6.44%, 12.24 mm, 8.31 mm and 5.67 mm, respectively. For oil extraction, Soxhlet method was used which resulted in the high oil content 54.0%. For quality assessment of oil, physicochemical parameters were checked according to official standard AOCS methods and compared with ASTM specifications. The determined parameters were as follows; specific gravity 0.953 g/cm–3, refractive index 1.431, viscosity 672.0 mPas.s, moisture content 0.32%, FFA 0.14%, IV 83.61 gI2/100 g, PV 2.25 meq/Kg and SV 186.0 mgKOH/g. Furthermore, fatty acid analysis of oil showed that, most abundant fatty acid was ricinoleic acid 94.59%, followed by palmitic 0.31%, linoleic 1.84%, oleic (n-9) 2.05%, oleic (n-10) 0.22%, stearic 0.45% and eicosenoic acid 0.53%. The detected fatty acids were compared with registered variety and varieties of other regions.
In this work both kinetic and thermodynamics of castor oil extraction from its seeds using subcritical water technique were studied. It was found that the extraction process followed two consecutive steps. In these steps, the oil was firstly extracted from inside the powder by diffusion mechanism. Then the extracted oil, due to extending the extraction time under high temperature and pressure, was subjected to a decomposition reaction following first order mechanism. The experimental data correlated well with the irreversible consecutive unimolecular-type first order mechanism. The values of both oil extraction rate constants and decomposition rate constants were calculated through non-linear fitting using DataFit software. The extraction rate constants were found to be 0.0019, 0.024, 0.098, 0.1 and 0.117 min–1, while the decomposition rate constants were 0.057, 0.059, 0.014, 0.019 and 0.17 min–1 at extraction temperatures of 240, 250, 260, 270 and 280°C, respectively. The thermodynamic properties of the oil extraction process were investigated using Arrhenius equation. The values of the activation energy, Ea, and the frequency factor, A, were 73 kJ mol–1 and 946, 002 min–1, respectively. The physicochemical properties of the extracted castor oil including the specific gravity, viscosity, acid value, pH value and calorific value were found to be 0.947, 7.487, 1.094 mg KOH/g, 6.1, and 41.5 MJ/Kg, respectively. Gas chromatography analysis showed that ricinoleic acid (83.6%) appears as the predominant fatty acid in the extracted oil followed by oleic acid (5.5%) and linoleic acid (2.3%).
Stearoyl ascorbate or 6-O-stearoyl l-ascorbate is a lipophilic derivative of l-ascorbic acid and is commercially used in foods as a fat-soluble antioxidant and surfactant to overcome the disadvantages of using l-ascorbic acid. The objective of this research is to evaluate the antioxidative ability of stearoyl ascorbate, in the presence of wheat starch or gluten as a matrix, by measuring the unoxidized methyl linoleate available in the mixture of them after oxidation under accelerated conditions compared to that when using ascorbic acid. We observed that stearoyl ascorbate and ascorbic acid exhibited mutually adjacent antioxidative ability against oxidation of the methyl linoleate at a molar ratio of 0.0001 in presence of either wheat starch or gluten. In addition, the oxidation process in the mixture containing either stearoyl ascorbate or ascorbic acid was significantly slower than that in the mixture without stearoyl ascorbate or ascorbic acid. Moreover, by altering the initiation and propagation periods of the oxidation process, the mixture containing the stearoyl ascorbate and gluten as the matrix exhibited conspicuously slower oxidation than the mixture containing either the wheat starch or stearoyl ascorbate alone. However, increase in the ratio of stearoyl ascorbate to methyl linoleate to 0.001 or higher resulted in adverse effects due to acceleration of the oxidation process.
The surface properties and the tactile texture of human hair are important in designing hair-care products. In this study, we evaluated the temporal changes of friction and temperature during the drying process of wet human hair containing water, silicone oil, or oil-in-water (O/W) emulsion. The wet human hair including water or O/W emulsion have a moist feel, which was caused by the temperature reduction of approximately 3-4°C. When human hair is treated with silicone oil, more than 60% of the subjects felt their hair to be slippery and smooth like untreated hair. Treating hair with O/W emulsion after drying made the subject perceive a slippery feeling because the surfactant reduced friction on the hair surface. These results indicated that both friction and thermal properties of the hair surface are important to control the tactile texture of the human hair.
The interfacial properties of polyoxyethylene alkyl ether-type nonionic surfactants (CnEm) were studied in a hydrophilic room-temperature ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4), in the presence of water. These properties were assessed using static surface tension, pyrene fluorescence, and dynamic light scattering measurements. The interfacial properties were strongly dependent on the solution composition. Increased water concentration lowered the critical micelle concentration (cmc). The cmc was also affected by the lengths of both the alkyl and polyoxyethylene chains, but a greater impact was observed for the alkyl chain length. These results indicate that micellization occurs as a result of solvophobic interaction between surfactant molecules in the water/bmimBF4 mixed solutions, similar to aqueous surfactant systems. The cloud point phenomenon was observed for CnEm with a relatively low hydrophilic–lipophilic balance (HLB) value, and the relationship between the cloud point and water/bmimBF4 composition exhibited a convex upward curve. Furthermore, the mixing of bmimBF4 with water increased the surfactant solubility for water-rich compositions, suggesting that bmimBF4 acts as a chaotropic salt.
Biodiesel from palm oil mill sludge (POMS) was prepared in the presence of novel silica-based heterogeneous catalysts derived from Imperata cylindrica sp. Imperatacid and Imperatabase are two types of heterogeneous catalysts derived from Imperata cylindrica sp and characterized using scanning electron microscopy, Energy Dispersive X-ray, Brunauer-Emmett-Teller surface area and pore size measurement. Imperatacid has particle size of 43.1-83.9 µm while Imperatabase in the range of 89-193 µm. Imperatacid was conveniently applied in esterification step to afford > 90 wt% oil in 1:3 (oil/methanol) and 10 wt% catalyst, followed by transesterification with 1 wt% Imperatabase and 1:1 (oil/methanol) for 1 h at 65°C to afford 80% biodiesel with higher percentage of methyl palmitate (48.97%) and methyl oleate (34.14%) compare to conventional homogeneous catalyst. Reusability of the catalyst up to three times afforded biodiesel ranging from 78-80% w/w. The biodiesel was demonstrated onto alternative diesel engine (Megatech®-Mark III) and showed proportional increased of torque (ɽ) to biodiesel loading.
The oxidation of oil starts, in general, from the penetration of atmospheric oxygen into oil. Inhibition of the vigorous oxidation of oil at deep-frying temperature under carbon dioxide flow, by disrupting the contact between oil and air, was first demonstrated using oil in a round bottom flask. Next, the minimum carbon dioxide flow rate necessary to blanket 4 L of frying oil in an electric fryer (surface area 690 cm2) installed with nonwoven fabric cover, was found to be 40 L/h. Then deep-frying of potato was done accordingly; immediately after deep-frying, an aluminum cover was placed on top of the nonwoven fabric cover to prevent the loss of carbon dioxide and the carbon dioxide flow was shut off. In conclusion, the oxidation of oil both at deep-frying temperature and during standing was remarkably inhibited by carbon dioxide blanketing at a practical flow rate and volume. Under the deep-frying conditions employed in this study, the increase in polar compound content was reduced to half of that of the control.
Experiments were conducted to assess the maintenance effects of oligosaccharide-based surfactants on the enzymatic activity of a model protein, lactate dehydrogenase (LDH), during freeze-drying and room temperature storage using the citric acid buffer system. Oligosaccharide-based surfactants, which exhibit a high glass transition temperature (Tg), promoted the eminent retention of enzymatic activity during these protocols, whereas monosaccharide-based surfactants with a low Tg displayed poor performance at high concentration, albeit much better than that of Tween 80 at middle concentration. The increase in the alkyl chain length did not exert positive effects as observed for the maintenance effect during freeze-thawing, but an amphiphilic nature and a glass forming ability were crucial for the effective stabilization at a low excipient concentration during freeze-drying. Even a low oligosaccharide-based surfactant content (0.1 mg mL–1) could maintain LDH activity during freeze-drying, but a high surfactant content (1.0 mg mL–1) was required to prevent buffer precipitation and retain high LDH activity on storage. Regarding storage, glass formation restricted molecular mobility in the lyophilized matrix, and LDH activity was effectively retained. The present results describe a strategy based on the glass-forming ability of surfactant-type excipients that affords a natural sugar-free formulation or an alternative use for polysorbate-type surfactants.
Important Announcement for the Contributors of the Journal of Oleo Science;
At 0:00 AM on April 1, 2016 (Japan time), the Journal of Oleo Science will start charging Publication Charge for each case; 1: 20,000 yen (within 8 pages. /more than 8 pages, additional charge is necessary; 2,000 yen per page) for Members of Japan Oil Chemists’ Society (JOCS) (including Asian Members and Support Members), 2: 40,000 yen (within 8 pages. /more than 8 pages, additional charge is necessary; 4,000 yen per page) for Non-Members of JOCS.
J-STAGE will be temporary out of service due to system maintenance on Nov. 24, 21:00 - Nov. 25, 8:00 UTC.