紙パ技協誌
Online ISSN : 1881-1000
Print ISSN : 0022-815X
ISSN-L : 0022-815X
38 巻, 5 号
選択された号の論文の10件中1~10を表示しています
  • パルプ生産と畜産を両立させる耳よりな話
    福田 祐作
    1984 年 38 巻 5 号 p. 499-500
    発行日: 1984/05/01
    公開日: 2009/11/19
    ジャーナル フリー
  • 山口 章
    1984 年 38 巻 5 号 p. 501-513
    発行日: 1984/05/01
    公開日: 2009/11/19
    ジャーナル フリー
    This paper deals with forcussing on recovery processes and preparation of cooking liquor as the final report of this pulping technology series.
    1) As the attractive developing technology in recovery processes, there are reviewed washer equipment, evaporation and recovery boiler which contribute to save energy. And also it should added that computor control in this field had come into wide use and is effective technology for operation and save energy.
    2) As the attractive technology in preparation of cooking liquor, the pressurized filter and direct causticizing process are reviewed.
  • (13) Crestbrook Forest Industries社Skookumchuckパルプ工場 (14) MacMillan Bloedel社Port Alberniパルプ及び製紙工場
    米谷 稔
    1984 年 38 巻 5 号 p. 514-521
    発行日: 1984/05/01
    公開日: 2009/11/19
    ジャーナル フリー
    本工場はカナダBritish Colnmbia州 (以下B.C州と略す) 内陸東南地方のSkookumchuckにある。
  • 内堀 毅
    1984 年 38 巻 5 号 p. 522
    発行日: 1984/05/01
    公開日: 2010/02/22
    ジャーナル フリー
  • 大気汚染防止に関する規制と対策の推移
    日本製紙連合会・環境保全委員会
    1984 年 38 巻 5 号 p. 523-534
    発行日: 1984/05/01
    公開日: 2009/11/19
    ジャーナル フリー
    この報告は紙パルプ産業における大気汚染防止の規制と対策について, 昭和46年から10年間の推移をアンケート調査して119工場から得た回答の結果である。
    この10年問に国の規制は各汚染物質とも数次の改定強化が行われ, 自治体による上乗せ規制もこれに追従して厳しくなってきている。公害防止協定で大気汚染防止に関しての取決めをしている工場数は, 回答工場の58%に及んでいる。
    これらの規制強化に対応するため10年間に投資された金額は536億円に達しており, その主体はSOx対策が52%, ばいじん対策が40%となっている。また, 投資額の約55%は重油ボイラー, 33%は回収ボイラーの対策設備に使用されている。投資額の年度推移では昭和50年度がピークとなっており, これはこの時期にSOxの総量規制実施やK値改正があって脱硫装置の設置に多額の扱資が行われたためである。54~55年度の投資が再増加しているのは最近の重油ボイラーから石炭燃焼への転換と, 脱硫装置の増加等が要因である。
  • 山陽国策パルプ (株) 旭川工場
    山陽国策パルプ株式会社
    1984 年 38 巻 5 号 p. 535-544_1
    発行日: 1984/05/01
    公開日: 2009/11/19
    ジャーナル フリー
    Asahikawa mill is located in Hokkaido inland.
    Our mill has nine paper machines of which type are one cylinder former, one twin former and seven fourdrinier machines, producing daily 1, 000 metric tons of pulp and paper here.
    As proud of things, we supply 70 per cent base paper for copper-clad laminates for printed circuits as well as 40 per cent fireretardant type of hanging raw stocks for wall covering in Japan.
    We have 900 employees, 1, 175, 000 square meters mill site area and utilize 3, 500 cubic meters of wood daily.
  • 木村 実, 清水 弘
    1984 年 38 巻 5 号 p. 545-552
    発行日: 1984/05/01
    公開日: 2009/11/19
    ジャーナル フリー
    The mechanical behavior of relatively low grammage spots in paper sheets during deformation has become more critical because of the recent production trials of lightweight paper and the tendency towards more efficient use of wood resources. The computer simulation technique using the finite element method is discussed from the view point of establishing the basic simulation method enabling us to analyse an approximate estimation of the load-elongation behavior of the individual spots in paper as well as that of the entire paper sheet.
    The simulation was based upon the incremental strain method carried out starting from approximately one tenth of the failure load, followed by 13-15 additional loading steps. The additional load increment of each step decreased by 0.04 of the initial load.
    The output of the simulation in the analysis fitted well with the input data when equation (6) was adopted in the estimation of the total strain up to the i-th incremental step necessary for choosing the elastic modulus of paper for the calculation of stress and strain of the i-th step.
    The trials were performed successfully for various kinds of paper, such as bleached softwood handmade sheet, filter paper, restraint free handmade sheet, and commercial unbleached kraft paper.
    It is concluded finally that the method is useful to analyse mechanical behavior of paper when taking mass variation into account.
  • 鈴木 勉, 戸坂 圀夫, 林 治助
    1984 年 38 巻 5 号 p. 553-564
    発行日: 1984/05/01
    公開日: 2009/11/19
    ジャーナル フリー
    SO2-MgSO4二成分法およびMgベースサルファイト法によるカバ材の蒸解データを, 先に報告したエゾマツ材の蒸解反応の速度解析に用いたのと同じ不均一系反応モデルによる速度式に従って解析し, 脱リグニンと脱炭水化物反応の律速段階を推定した。
    両法では, これら蒸解反応の速度や進行模様は著しく異なっていた。これは, 蒸解液のパルプ化能力の差に関係した木材細胞壁の細孔構造の発達の違いによって説明された。
    カバ材蒸解の結果と先のエゾマツ材蒸解の結果とを比較すると, 両樹種の蒸解挙動の特徴に関する興味ある情報が得られた。
  • 石川 久雄, 大久保 克美, 沖 妙
    1984 年 38 巻 5 号 p. 565-572
    発行日: 1984/05/01
    公開日: 2009/11/19
    ジャーナル フリー
    In connection with the paper making properties of tororo-aoi mucin (TM) and polyethylene oxide (PEO) solutions, the permeabilities of the polymer solutions through the rayon pulp bed and the sedimentation velocities of the pulp in the solutions were measured.
    The permeability of TM solution was significantly smaller than that of PEO solution under the same conditions, and increased rapidly by aging or by the addition of NaCl. The fluent flow of TM solution through the pulp bed was proved to be un-explainable by Darcy's equation.
    Close correlation was also confirmed among the viscosity and permeability of TM solution or the sedimentation velocity of rayon pulp in the solution and the initial conformational transition of an ordered, weak structure of TM molecule. It was further clarified that the paper making properties described above are remarkably influenced by the dissociation of carboxyl group present in TM molecule and by the surface state of pulp fiber.
    From the results, the characteristic paper making property of TM is appreciably explained to be occured by a pore radius decrease in the rayon pulp bed, which is due to the thicker immobile layer caused by TM adsorption on the fiber surface, and by the dissociation of carboxyl group present in the mucin molecule. It was also found that a decrease in the effect of TM on paper making is partially inhibited by the addition of PEO in the aqueous solution.
  • 1984 年 38 巻 5 号 p. 578
    発行日: 1984年
    公開日: 2009/11/19
    ジャーナル フリー
feedback
Top