Purpose: Hyperthermia is a treatment that applies heat to damage or kill cancer cells and can be also used for drug deliveries. It is important to apply the heat into the specific area in order to target the cancer tissue and avoid damaging healthy tissue. For this reason, the development of heat applicators that have the capability to deliver the heat to the target area is vital. In this study, we present an optimization of an array coil for brain hyperthermia that can be used in combination with MRI, such that the heat can be delivered to the cancer area.

Methods: The array coils were based on optimizing loop coils by varying the capacitor’s position along the perimeter. The optimization was performed using electromagnetic simulations, by computing the electric field (E) and temperature inside of the brain and targeting tumor tissues for focus temperature application. The coils were compared with a general–use symmetric coil array for head heating.

Results: The optimization of the coil array was able to focus electric field and make temperature rise at the cancer areas. The temperature in Tumor 1 before and after standard and the proposed method optimization was 43.6°C, 48.3°C, and 42.5°C and for Tumor 2 the temperatures were 44.2°C, 43.1°C, and 42.9°C, respectively. Although the standard optimization method exhibits higher temperatures, it also had higher temperatures outside the tumors area.

Conclusion: We demonstrated the optimization of array coils with different capacitor positions to obtain focused heating temperatures.

Over the last two decades, the status of MR safety has dramatically changed. In particular, ever since the MR-conditional cardiac device was approved by the Food and Drug Administration (FDA) in 2008 and by the Pharmaceuticals and Medical Devices Agency (PMDA) in 2012, the safety of patients with an implantable medical device (IMD) has been one of the most important issues in terms of MR use. In conjunction with the regulatory approvals for various IMDs, standards, technical specifications, and guidelines have also been rapidly created and developed. Many invaluable papers investigating and reviewing the history and status of MR use in the presence of IMDs already exist. As such, this review paper seeks to bridge the gap between clinical practice and the information that is obtained by standard-based tests and provided by an IMD’s package insert or instructions for use. Interpretation of the gradient of the magnetic flux density intensity of the static magnetic field with respect to the magnetic displacement force is discussed, along with the physical background of RF field. The relationship between specific absorption rate (SAR) and B_1+RMS, and their effects on image quality are described. In addition, insofar as providing new directions for future research and practice, the feasibility of safety test methods for RF-induced heating of IMDs using MR thermometry, evaluation of tissue heat damage, and challenges in cardiac IMDs will be discussed.

RF electromagnetic wave exposure during MRI scans induces heat and occasionally causes burn injuries to patients. Among all the types of physical injuries that have occurred during MRI examinations, RF burn injuries are the most common ones. The number of RF burn injuries increases as the static magnetic field of MRI systems increases because higher RFs lead to higher heating. The commonly believed mechanisms of RF burn injuries are the formation of a conductive loop by the patient’s posture or cables, such as an electrocardiogram lead; however, the mechanisms of RF burn injuries that occur at the contact points, such as the bore wall and the elbow, remain unclear. A comprehensive understanding of RF heating is needed to address effective countermeasures against all RF burn injuries for safe MRI examinations. In this review, we summarize the occurrence of RF burn injury cases by categorizing RF burn injuries reported worldwide in recent decades. Safety standards and regulations governing RF heating that occurs during MRI examinations are presented, along with their theoretical and physiological backgrounds. The experimental assessment techniques for RF heating are then reviewed, and the development of numerical simulation techniques is explained. In addition, a comprehensive theoretical interpretation of RF burn injuries is presented. By including the results of recent experimental and numerical simulation studies on RF heating, this review describes the progress achieved in understanding RF heating from the standpoint of MRI burn injury prevention.

The effect of maternal occupational non-ionizing radiation (NIR) exposure from MRI on premature birth and low birth weight delivery was analyzed based on questionnaire survey (263 employees, 443 births). Although the highest occurrence rates of both outcomes were observed in the group whose NIR exposure occurred only before pregnancy, no statistical significance was detected.