巻号一覧
30 巻 (1993)
- 6 号 p. 346-
- 5 号 p. 284-
- 4 号 p. 226-
- 3 号 p. 142-
- 2 号 p. 76-
- 1 号 p. 2-
前身誌
30 巻, 6 号
選択された号の論文の8件中1～8を表示しています
- |<
- <
- 1
- >
- >|
-
(5) 最近の高度分析評価技術 印刷分野における分析評価技術の活用黒田 孝二1993 年 30 巻 6 号 p. 346-351
発行日: 1993/11/30
公開日: 2010/09/27
ジャーナル フリーPrinted image consists of 10 to 200μm dots. The analysis should be done at less than 10μm resolution to aquire material data as small as processing size. The new products such as photomask, hologram and LCD color filter require less than 1μm resolution of processing, uniformity and analysis as well. Various functions correspond to material structure, chemical state and morphology at certain depth layer. Functions such as lubrication, wettability, releasing and adhesion correspond to 10 to 100Å depth layer. The next target analysis area will be submicron resolution and from 10Å to 1μm depth.抄録全体を表示PDF形式でダウンロード (1563K) -
(5) 最近の高度分析評価技術 EPMAカラーマッピング法による紙基材の分析浜田 忠平1993 年 30 巻 6 号 p. 352-365
発行日: 1993/11/30
公開日: 2010/09/27
ジャーナル フリーThe color mapping technique by using EPMA (Electron Probe Microanalyzer) was found very effective to measure the distribution of paper constituents such as pigments, SB-latex and silicone. In this paper, the principle and mechanism of EPMA were briefly described and several examples of color mapping applied to coated paper, cast coated paper and release liner were demonstrated. The relationship of latex distribution to ink mottles on the coated paper surfaces was studied by means of the wide area state electron probe analyzer. It was recognized that the ink mottle was caused by ununiform distribution of latex on the coated paper surface.抄録全体を表示PDF形式でダウンロード (5477K) -
(5) 最近の高度分析評価技術 塗膜と接着加工の分析評価技術田中 丈之1993 年 30 巻 6 号 p. 366-373
発行日: 1993/11/30
公開日: 2010/09/27
ジャーナル フリーThe coatings are made of many kinds of raw materials. Their separation and component analysis are essential technology for the coatings characterization. Their properties are also determined by the resin texture formed through solvent evaporating and resin curing process. The film forming process is analysed reologically in correspond to IR and chemiluminescence spectra. The weathering degradation is caused by combination of several enviromental conditions, and the accelerated test for weathering resistance evaluation should be done from points of optical, physical and chemical analysis.抄録全体を表示PDF形式でダウンロード (1283K) -
長田 耕一1993 年 30 巻 6 号 p. 374-379
発行日: 1993/11/30
公開日: 2010/09/27
ジャーナル フリーSince the Kodak Photo CD System became available, many consumers are using Photo CD discs and Players to view their photographs on television. Also, imaging professionals are interested in the capability of Photo CD, such as a way to store images at low cost, in a high-resolution digital format that can be played back on different computer platforms. However, because of the unique color-encoding scheme, some customers in commercial imaging industry grope for the best usage with Photo CD images. Therefore, this paper describes the architecture of Photo CD System including the Photo YCC color-encoding scheme, and also describes the Kodak color management function that is a key issue to assure the image quality in the printing and publishing industry.抄録全体を表示PDF形式でダウンロード (1028K) -
印刷用紙の構造と浸透初期の関係について田中 恒雄, 染矢 幸通1993 年 30 巻 6 号 p. 380-389
発行日: 1993/11/30
公開日: 2010/09/27
ジャーナル フリーIn a previous paper the dependence of ultrasonic wave attenuation on penetration into porous media was investigated. In that method nitrocellulose membrane filters were in contact with aqueous and nonaqueous liquid systems through irradiation of 2 MHz of ultrasonic wave. The present paper relates application of the above method to commercial sized papers mainly including coated high-grade printing papers structurely far more complicated. The purpose also intends to obtain some useful information about the wetting and the liquid absorption of the papers. In this study ultrasonic attenuation versus contact time curves obtained for seven kinds of specimens were analyzed. Three characteristics parameters specifying the initial penetration behaviour for each sample were determined and compared with physical characteristics of those specimens. Results of correlation analysis suggest that the change in ultrasonic attenuation at the initial stage of liquid penetration still depends on the pore size obtained by mercury intrusion method.抄録全体を表示PDF形式でダウンロード (1119K) -
印刷品質に対する湿し水量の影響村澤 貞夫, 石灰 洋一, 岡田 瑞穂, 村上 肇1993 年 30 巻 6 号 p. 390-395
発行日: 1993/11/30
公開日: 2010/09/27
ジャーナル フリーThe quality of the print using Titanium Dioxide (TiO2) lithographic plate is investigated in the aspects of the amount of fountain solution. In offset printing, print quality depends on the balance of ink and fountain solution. Compared with coventional PS plate and Zinc Oxide lithographic plate, TiO2 plate is capable of producing high image quality print by lesser amount of fountain solution. Moreover, the image quality is little affected by the increase of fountain solution. This is because the surface of TiO2 plate has high wettability from the solution and because the porosity in TiO2 layer keeps excess fountain solution.抄録全体を表示PDF形式でダウンロード (1780K) -
張 彩明, 安居院 猛, 長橋 宏1993 年 30 巻 6 号 p. 396-401
発行日: 1993/11/30
公開日: 2010/09/27
ジャーナル フリーA technique for simplifying 3-D model construction from a sketch is described. The sketched object is divided into many components, and their 3-D data are inputted. Then after constructing surface patches for each component, all the patches are connected together to form the three dimensional model. The present paper proposes a new technique to connect them. The technique enables to construct a surface patch from two or three surface patches by connecting them with C1 continuity. The experiments show that the shapes of objects constructed by this technique are desirable.抄録全体を表示PDF形式でダウンロード (981K) -
帆波 羊一1993 年 30 巻 6 号 p. 402-403
発行日: 1993/11/30
公開日: 2010/09/27
ジャーナル フリーPDF形式でダウンロード (801K)
- |<
- <
- 1
- >
- >|