日本印刷学会論文集
Online ISSN : 2185-1263
Print ISSN : 0040-0874
ISSN-L : 0040-0874
14 巻, 4 号
選択された号の論文の5件中1~5を表示しています
  • 西村 弘
    1974 年 14 巻 4 号 p. 139-150
    発行日: 1974/03/15
    公開日: 2010/09/27
    ジャーナル フリー
  • トリエタノールアミン水溶液中で生成するアルミニウム化成皮膜の表面あらさにおよぼす処理条件の影響
    森島 毅
    1974 年 14 巻 4 号 p. 151-156
    発行日: 1974/03/15
    公開日: 2010/09/27
    ジャーナル フリー
    ジアゾ化合物や感光性樹脂などの有機感光性物質を平滑なアルミニウム支持体上に直接被覆すると, 現像処理の際に, アルミニウム表面と感光層との界面で容易に界面はく離をおこす。 また露出した活性な金属素地と感光性物質とが反応して, 現像性を低下させる。
    そこで本研究では, 有機感光性物質を被覆するための金属表面処理の研究の一環として, アルミニウム表面を不活性にし, かつ感光液との密着性を高める有用な下地処理皮膜を形成するための化成処理条件, 効果を検討した。
    トリエタノールアミンの添加量, 処理温度, 処理時間の3因子を抽出, 特性値に密着性に関係すると考えられる処理皮膜の表面あらさ (中心線平均あらさRa) をとりあげ三元配置法にて要因効果を検討した。
    その結果化成皮膜の表面あらさに影響を与える最も大きな要因は, 処理温度であり, 高温度で処理するほうがRaの値は大きくなる。
  • トリエタノールアミン水溶液により生成するアルミニウム化成皮膜の表面形状に関する研究
    森島 毅
    1974 年 14 巻 4 号 p. 157-170
    発行日: 1974/03/15
    公開日: 2010/09/27
    ジャーナル フリー
    本報では, 低温と高温の二つの処理温度領域で, 生成した化成皮膜の表面形状が時間に対して, どのように変化するか, 主として表面あらさ計の断面曲線, 中心線平均あらさ (Ra) および顕微鏡写真などから追跡観察した。
    また, 酸化皮膜の表面あらさを最大にするための最適条件を求めた。
    その結果, アルミニウム化成皮膜には, 孔食に起因すると思われる微視孔が認められ, その単位面積に存在する数, 孔径, あなの深さは処理条件によって異なる。
    本実験の範囲内では, 0.50mol/lのT. E. Aを添加した水溶液中で, 95℃の高温度で5分間処理するのが, 表面あらさを最大にする条件である。
  • 版面の保水量測定の試み
    杉山 泰朗, 垣生 真一
    1974 年 14 巻 4 号 p. 171-180
    発行日: 1974/03/15
    公開日: 2010/09/27
    ジャーナル フリー
    We tried to measure the amount of dampening water (water amount) on a grained aluminium plate.
    We considered that wettability might be related to the water amount on various grained surfaces.
    We defined the water amount as the amount remained on the grained plate and measured this amount by the device built as a trial.
    It is found f hat the plate grained with #300 abrasives have the most water amount. Our results are as follows.
    1) Water amount is not influenced by the measured roughness of the grained surface but on the grained procedure and size of abrasives.
    2) Water amount on the plate grained by brush is very small as compared with that by ball.
    3) It is difficult to find a certain relationship between water amount and contact angle.
    4) We tried to calculate the water film thickness on the grained plate and discussed the relationship between wettability and the thickness.
  • 分島 拓, 水上 照雄, 長田 正明
    1974 年 14 巻 4 号 p. 181-186
    発行日: 1974/03/15
    公開日: 2010/09/27
    ジャーナル フリー
    A new method of measuring curl of printing paper was investigated, in which light from a point sont source illuminated the sample paper after passing through a grating and the shadow of the grating on the sample, superposed on the grating itself was observed from a definite point. By a suitable choice of the position of the light source and the camera, Moiré pattern observed could be made contour lines on the sample paper. With this device, tentative measurement was made of the curl of four sorts of typical printing papers, newsprint, uncoated paper, dull-finished coated paper and coated paper under various moistenning conditions.
feedback
Top