日本印刷学会論文集
Online ISSN : 2185-1263
Print ISSN : 0040-0874
ISSN-L : 0040-0874
21 巻, 3 号
選択された号の論文の5件中1~5を表示しています
  • 耐地汚れ性の評価法と耐地汚れ性に及ぼす諸要因の影響について
    池田 憲正, 森 与一
    1983 年 21 巻 3 号 p. 77-83
    発行日: 1983/12/23
    公開日: 2010/09/27
    ジャーナル フリー
    水なし平版用インキの耐地汚れ性の定量的評価法について検討し, 地汚れは版面温度が支配的要因であることを見出した。 この結果から, 一定の印刷条件で, 印刷機の版面を加熱昇温しながら印刷を行ない, 地汚れが発生する版面温度をもって水なし平版用インキの耐地汚れ性の尺度とすることにし, これを地汚れ発生指数と呼ぶことにした。 地汚れ発生指数は, ユーザーにおける各種印刷機での実用印刷で, 地汚れのしやすさと良く対応した。
    地汚れ発生指数は相対的な尺度であり, 印刷物のインキ濃度, 印刷機のインキ部のローラー圧仕立て条件, 印刷速度などの印刷条件によって大きく変化する。
    地汚れ発生指数とインキ物性との関係について検討し, 地汚れ発生指数は, インキのタック値やフロー値とは必ずしも相関関係が無く, 高ズリ速度における粘度または塑性粘度との間に非常に良い相関関係があることを見出した。
  • 高橋 恭介, 藤田 英昭, 坂田 俊文
    1983 年 21 巻 3 号 p. 85-95_4
    発行日: 1983/12/23
    公開日: 2010/09/27
    ジャーナル フリー
    This paper describes the mechanisms of an ink transfer in offset printing process. It is found that the ink layer on the dot resin of PS plate is a mountain shape. The mountain shaped ink layer on resin dot is transfered to gum blanket by printing pressure, and at that time, the dot gain takes place. The square dot changes to the circular one on the blanket and increases about 10-25% in dot size. If other printing condition is constant, the supply variation of a fountain solution on the dampening rollers slightly influence to the total ink layer thickness on dot resin of PS plate. Therefore, the ink dot size on printed paper little changes, but the ink layer thickness and its shape of printed dot on paper is changed by the variation of the fountain solution on the dampening rollers, The ink transfer mechanisms at the three points in lithographic printing, that is, the ink transfer from inking roller to PS plate to blanket and blanket to paper are discussed by phenomenological model.
  • 単色網点画像の視知覚特性
    金子 良二, 佐藤 富士達, 奥山 滋
    1983 年 21 巻 3 号 p. 97-103
    発行日: 1983/12/23
    公開日: 2010/09/27
    ジャーナル フリー
    The present experiment covers the psychophysical characteristics of single ink halftone printing, for visually represented density of human perception.
    As the screen ruling increases the visually represented density of human perceptions is inclined to rise higher, the above expeiment leads to establish the relationships among luminous reflectance Y, the optical density and visually represented density. It was also tried on visually represented density by various patterns and by Maxwell disk.
    As the result of the work mentioned above, the visually represented density of halftone printing is capable of being close to the value of luminous reflectance and optical density. It is obvious that visually represented density obtained by halftone printing differs from that of Maxwell disk, though the percentage is the same.
  • 二次色網点画像の視知覚特性
    金子 良二, 佐藤 富士達, 奥山 滋
    1983 年 21 巻 3 号 p. 105-113
    発行日: 1983/12/23
    公開日: 2010/09/27
    ジャーナル フリー
    The behaviors of color mixture on color halftone printing are too complicated for many unsolved problems to be made clear yet.
    There are only few experiments on the influence of additive mixture of colors, especially in highlight part. This experiment comprehends the fixture of relationships between halftone printings of two-color overlaps and Maxwell disk considered as the means of additive mixture of colors, and the perceptual evalvation.
    The values of physical measurement are checked over two-color overlap printing and Maxwell disk by color difference meter to get the difference in hue.
    In view of the perceptual value, HVC value of Maxwell disk differed extremely from that of color halftone printing against the same percentage.
  • 網点移動量の推定
    国司 龍郎, 大竹 廉治
    1983 年 21 巻 3 号 p. 115-121
    発行日: 1983/12/23
    公開日: 2010/09/27
    ジャーナル フリー
    良好な階調及び色の再現を行なうためには原稿カラーフィルムのどのような濃度部をある定められた網点の大きさに対応させればよいかについて, その方法を研究した。 ここでは種々の原稿についてまず濃度累積分布曲線を作り, これを正規化した後に更に単純化して2本の勾配の異なる直線で表現することとした。 次にこの2本の線の交点を求め, この点の位置と標準とする点の距りから最適網点移動量を計算した。 この方法は前回に報告した方法より客観性に富み, 且つ簡単である。 種々の原稿に対してこの方法により直接法3色分解時の網点移動を行ない, 校正刷りを作った所, 良い結果を得ることができた。
feedback
Top