応用測量論文集
Online ISSN : 2760-6392
Print ISSN : 2185-1867
32 巻
選択された号の論文の8件中1~8を表示しています
論文
  • 外谷 新, 木谷 友哉
    2021 年32 巻 p. 3-11
    発行日: 2021/09/21
    公開日: 2026/05/27
    ジャーナル フリー

    The Cabinet Office of Japan has prepared a map data specification to develop dynamic maps for autonomous driving under the Strategic Innovation Program (SIP). The dynamic maps prepared based on the specification are made from point-cloud data acquired by MMS (Mobile Mapping System) with Map Information Level 500 accuracy. We have equipped an RTK-GNSS reference station and have developed a logging system for this feasibility study. Through the acquired probe data and MMS data of 25km in the suburban of Hamamatsu, this research has confirmed that a dynamic map lane-link information can be updated using probe data with precise position by RTK-GNSS.

  • 笹野 拓海, 大木 亜美, 藤村 大輔, 山口 裕哉, 白石 宗一郎, 岡本 直樹, 岩上 弘明, 佐田 達曲, 江守 央
    2021 年32 巻 p. 13-22
    発行日: 2021/09/21
    公開日: 2026/05/27
    ジャーナル フリー

    In this study, the basic layer thickness detection accuracy of the MMS with PS laser scanner on the side wall is investigated. The results show that the accuracy is not affected by the presence or absence of satellite correction and that the accuracy is maintained at a good level. In the evaluation of each target, it was shown that it was possible to detect “the existence of convexity up to 0.50 mm” between 20 km/h and 60 km/h driving speed even in the satellite radio wave shielding environment such as tunnels.

  • 里村 幹夫, 植田 伸一, 伊藤 広和, 末野 幹雄, 島田 誠一, 小林 敬幸, 多田 吉成, 中尾 茂
    2021 年32 巻 p. 23-31
    発行日: 2021/09/21
    公開日: 2026/05/27
    ジャーナル フリー

    We have analyzed the data of the GNSS Earth Observation Network System (GEONET) managed by the Geospatial information Authority of Japan and calculated the ground movements from the results. The figures of the movements are released as JISLaD, and we are also preparing the release of their numerical data as a paid release. On the other hand, we will undertake precise surveying at some airports in Japan. To maintain the coordinate values of the airport runway with the accuracy required by ICAO, we think that it is necessary to consider not only the current values but also crustal movements in the future. We are proposing four-dimensional dynamic coordinate management using JISLaD. Besides, we are now promoting to introduce this method in the Philippines, discussing with the local Civil Aviation Bureau (CAAP) and Geography Bureau (NAMRIA).

  • 村井 亮介, 高木 方隆
    2021 年32 巻 p. 33-44
    発行日: 2021/09/21
    公開日: 2026/05/27
    ジャーナル フリー

    In this study, vegetation phenology observation was realized using RGB value with UAV camera in 8-bit images. Until now, the phenology observation method for UAV images has not been established because the correction method for captured images has not been developed. Therefore, the authors developed a method for correcting shadows in UAV images and realized phenology observation using the brightness value. However, there is a problem that the event of the plant whose color changes cannot be observed only by the brightness value. Another problem with previous research is that the sunny place and shadow place on a fine day are illuminated by different light sources, and the colors cannot be corrected. For this reason, in this study, the phenology analysis was performed using only vegetation observation data on cloudy days when the light source focused on scattered light from the clouds. The lightness oy the relationship between the scattered light on a cloudy day and the terrain was corrected by sky view factor. And in order to see the change between each scene, it was normalized by RGB inter band calculation. As a result, plant events with changes in flower and leaf color has come to be observation.

  • 中川 雅史, 浪江 宏宗, 田口 雅邦
    2021 年32 巻 p. 45-54
    発行日: 2021/09/21
    公開日: 2026/05/27
    ジャーナル フリー

    The construction field has recently focused on technical and political issues such as productivity improvement and reducing the number of accidents. Various actions are available to address these issues based on building information modeling (BIM). BIM is used as a visual database to visualize and manage safety operations with cameras, LiDAR, global navigation satellite system (GNSS) devices, unmanned aerial vehicles, intelligent construction vehicles, virtual reality, and augmented reality. In this paper, we focus on using intelligent construction vehicles to improve the safety of workers. Generally, GNSS positioning is applied to obtain the position data of workers and construction vehicles in construction sites. However, construction fields in urban areas have poor satellite positioning environments. Therefore, we have developed a 3D sensing unit mounted on a construction vehicle for worker position data acquisition. In this study, we propose a real-time object recognition and identification methodology with laser scanning and bluetooth low energy (BLE) ranging. Moreover, we propose a pattern matching with temporal LiDAR and BLE data based on the deference of behavior among workers. We evaluated our methodology using temporal point clouds and BLE data acquired from a construction vehicle in drilling works.

報告
feedback
Top