計測自動制御学会論文集
Online ISSN : 1883-8189
Print ISSN : 0453-4654
ISSN-L : 0453-4654
46 巻, 12 号
選択された号の論文の9件中1~9を表示しています
論文
計測
  • 大澤 修一, 中村 文一, 西谷 紘一
    2010 年 46 巻 12 号 p. 733-736
    発行日: 2010年
    公開日: 2011/12/19
    ジャーナル フリー
    Self-localization is an important technique for vehicle automation. Extended Kalman Filtar (EKF) is a major sensor fusion technique for self-localization of mobile vehicles. To calculate Kalman gains, variance matrices are necessary. However, it is laborious to obtain variance matrices. In this paper, we compare the structure of the grid point observer with that of EKF, and propose a design method of decding variance matrices by using digital filter design method. In addition, effectiveness of the proposed method is confirmed by the experiments.
  • 近 哲也, 西山 道子, 伊与田 健敏, 松崎 純一, 渡辺 一弘
    2010 年 46 巻 12 号 p. 737-745
    発行日: 2010年
    公開日: 2011/12/19
    ジャーナル フリー
    This paper describes performances of fiber optic sensor modules developed for a sensor network system embedded into living spaces where an intelligent ubiquitous service would be offered. Three types of fiber-optic sensor modules are developed as a so-called optical nerve sensor network, in order to acquire presence information which can indicate the condition of human, structural materials and other stuffs in common living space. The sensor modules are successfully realized in the forms of a plastic tiled mat, a cushion and a binary switch, taking advantages of a hetero-core fiber optic technique which enables easy arrangement into our living space. The sensor modules can bring us effective presence information in terms of the weight and temporal profiles of human and space conditions in their natural and unconstrained behavior. The practical performance and advantage of this sensor network system have been verified from the service experiments performed in a test field where the sensor modules were installed in realistic density.
  • 中島 利郎, 仲嶋 一, 鷲見 和彦, 的場 修
    2010 年 46 巻 12 号 p. 746-753
    発行日: 2010年
    公開日: 2011/12/19
    ジャーナル フリー
    We have developed a road surface condition detection system using near-infrared light, which enables remote measurement. The developed system can detect the difference of road surface conditions as dry, water, ice, and snow.
    In this case, we focused on the light-absorption characteristics of water. To remove the affect of the thickness of the water layer, we have proposed a measured metrics as absorption ratio at two wavelengths. The absorption spectra were measured by using a water layer of 1mm thickness. The experimental results showed that the absorption peak shifts to longer wavelength when the water state changes into ice state. A ratio of absorption coefficients at 1300nm and 1410nm is constant even when the layer thickness changes from 0.2mm to 0.8mm. This result indicates that the proposed absorption ratio can be used as a criterion to detect the water state or the ice state.
    We have also proposed a reflected-light separation method by using polarization characteristics of light. There are two reflected light components. One is the reflected light from the water surface and the other is one from the road surface. The reflected light from the water surface keeps the polarization state of the input. However, the polarization state from the road surface becomes random state because of the rough surface. To remove the surface reflection of the water layer, orthogonal polarization detection of input and output pair is effective. This is confirmed by the experiment.
    We made a prototype of the above-described detection principle and it was tested by the experiment. As a result, the feasibility of determining road surface conditions such as dry, water and ice is confirmed by simultaneous measurement of light-absorption characteristics and reflection characteristics.
  • 小野 裕幸
    2010 年 46 巻 12 号 p. 754-758
    発行日: 2010年
    公開日: 2011/12/19
    ジャーナル フリー
    This paper describes a high frequency PLL (Phase Locked Loop) synthesizer with a function of learning then eliminating repeatable fluctuation of timing intervals on series input pulses. Typical spindle encoder generates digital pulses according to the revolution speed. The intervals of each pulse have repeatable fluctuation every revolution by eccentricity or warpage of the encoder scale disk. This method provides a programmable counter for the loop counter of PLL circuit and an interval counter with memory in order to learn the repeatable fluctuation. After the learning process, the PLL generates very pure tone clock signal based on the real flutter components of the spindle revolution speed without influenced by encoder errors. This method has been applied to a hard disk test system in order to generate 3GHz read/write clock.
制御
システムインテグレーション
  • 舩井 皓平, 溝上 浩司, 東森 充, 金子 真
    2010 年 46 巻 12 号 p. 791-796
    発行日: 2010年
    公開日: 2011/12/19
    ジャーナル フリー
    Active Strobe Imager enables us to visualize the dynamic behavior of tissue, even under a high frequent vibration that cannot be followed by the naked eye. A pneumatic actuator imparts a vibration to the target object. By flashing light with a slightly different frequency from the object frequency, we can see the dynamics of object by the naked eye. The vibration we can observe depends on various parameters such as frequency and duty ratio. We formulate the parameter optimization problem by considering the observability of object under strobe condition. By applying the full search method for the problem, we discuss the optimum set of parameters. We also confirmed the effectiveness of the optimized parameters through experiment.
feedback
Top