This article presents a universal and versatile model of multiservice overflow systems based on Hayward's concept. The model can be used to analyze modern telecommunications and computer networks, mobile networks in particular. The advantage of the proposed approach lies in its ability to analyze overflow systems with elastic and adaptive traffic, systems with distributed resources and systems with non-full-availability in primary and secondary resources.

Accounting for the exponential increase in security threats, the development of new defense strategies for pervasive environments is acquiring an ever-growing importance. The expected avalanche of heterogeneous IoT devices which will populate our industrial factories and smart houses will increase the complexity of managing security requirements in a comprehensive way. To this aim, cloud-based security services are gaining notable impetus to provide security mechanisms according to Security-as-a-Service (SECaaS) model. However, the deployment of security applications in remote cloud data-centers can introduce several drawbacks in terms of traffic overhead and latency increase. To cope with this, Edge Computing can provide remarkable advantages avoiding long routing detours. On the other hand, the limited capabilities of edge node introduce potential constraints in the overall management. This paper focuses on the provisioning of virtualized security services in resource-constrained edge nodes by leveraging lightweight virtualization technologies. Our analysis aims at shedding light on the feasibility of container-based security solutions, thus providing useful guidelines towards the orchestration of security at the edge. Our experiments show that the overhead introduced by the containerization is very light.

This paper considers wide-sense nonblocking operation of the Wavelength-Space-Wavelength elastic optical switch. Six control algorithms, based on functional spectrum decomposition in interstage links and functional decomposition of center stage switches, are proposed for two switching fabric architectures. For these algorithms we derived wide-sense nonblocking conditions and compared them with strict-sense nonblocking ones. The results show that the proposed algorithm reduces the required number of frequency slot units (FSUs) or center stage switches, depending on the switching fabric architecture. Savings occur even when connections use small number of frequency slot units.

In sparsity-based optimization problems for two dimensional (2-D) direction-of-arrival (DOA) estimation using L-shaped nested arrays, one of the major issues is computational complexity. A 2-D DOA estimation algorithm is proposed based on reconsitution sparse Bayesian learning (RSBL) and cross covariance matrix decomposition. A single measurement vector (SMV) model is obtained by the difference coarray corresponding to one-dimensional nested array. Through spatial smoothing, the signal measurement vector is transformed into a multiple measurement vector (MMV) matrix. The signal matrix is separated by singular values decomposition (SVD) of the matrix. Using this method, the dimensionality of the sensing matrix and data size can be reduced. The sparse Bayesian learning algorithm is used to estimate one-dimensional angles. By using the one-dimensional angle estimations, the steering vector matrix is reconstructed. The cross covariance matrix of two dimensions is decomposed and transformed. Then the closed expression of the steering vector matrix of another dimension is derived, and the angles are estimated. Automatic pairing can be achieved in two dimensions. Through the proposed algorithm, the 2-D search problem is transformed into a one-dimensional search problem and a matrix transformation problem. Simulations show that the proposed algorithm has better angle estimation accuracy than the traditional two-dimensional direction finding algorithm at low signal-to-noise ratio and few samples.

Inter-channel crosstalk is one of the crucial issues in multichannel optical systems. Conventional studies assume that the crosstalk and the main signals have identical format. The present study, in contrast, considers different signal formats for the main and crosstalk lights, and shows that bit error degradation is different depending on the modulation format. Statistical properties of the crosstalk are also investigated. The result quantitatively confirms that a crosstalk light whose signal distribution is closer to a Gaussian profile causes larger degradation.

The efficiency of generating four-wave mixing (FWM) from phase-modulated (PM) optical signal is studied. An analysis, that takes bit shifts occurring during fiber propagation due to group velocity differences into account, indicates that the FWM efficiency from PM signals is smaller than that from continuous waves in fiber transmission lines whose distance is longer than the walk-off length between transmitted optical signals.

In content oriented networks (CON), routers in a network are generally equipped with local cache storages and store incoming contents temporarily. Efficient utilization of total cache storage in networks is one of the most important technical issues in CON, as it can reduce content server load, content download latency and network traffic. Performance of networked cache is reported to strongly depend on both cache decision and content request routing. In this paper, we evaluate several combinations of these two strategies. Especially for routing, we take up off-path cache routing, Breadcrumbs, as one of the content request routing proposals. Our performance evaluation results show that off-path cache routing, Breadcrumbs, suffers low performance with cache decisions which generally has high performance with shortest path routing (SPR), and obtains excellent performance with TERC (Transparent En-Route Cache) which is well-known to have low performance with widely used SPR. Our detailed evaluation results in two network environments, emerging CONs and conventional IP, show these insights hold in both of these two network environments.

This paper presents the mode matching (MM)/finite element method (FEM) hybrid analysis for a short-slot 2-plane coupler, and an optimization process for a wideband design based on a genetic algorithm (GA). The method of the analysis combines a fast modal analysis of the MM which reduces the computation time, with the flexibility of an FEM which can be used with an arbitrary cross-section. In the analysis, the model is reduced into the one-eighth model by using the three-dimensional structural symmetry. The computed results agree well with those by the simulation and the computation time is reduced. The bandwidth is improved by the optimization based on the GA from 2.4% to 6.9% for the 2-plane hybrid coupler and from 5.4% to 7.5% for the 2-plane cross coupler. The measured results confirm the wideband design.

A low complexity channel estimation scheme using data-dependent superimposed training (DDST) is proposed in this paper, where the pilots are inserted in more than one block, rather than the single block of the original DDST. Comparing with the original DDST (which improves the performance of channel estimation at the cost of huge computational overheads), the proposed DDST scheme improves the performance of channel estimation with only a slight increase in the consumption of computation resources. The optimal precoder is designed to minimize the data distortion caused by the rank-deficient precoding. The optimal pilots and placement are also provided to improve the performance of channel estimation. In addition, the impact of power allocation between the data and pilots on symbol detection is analyzed, the optimal power allocation scheme is derived to maximize the effective signal-to-noise ratio at the receiver. Simulation results are presented to show the computational advantage of the proposed scheme, and the advantages of the optimal pilots and power allocation scheme.

Wireless powered communication networks (WPCNs) utilize the wireless energy transfer (WET) technique to facilitate the wireless information transmission (WIT) of nodes. We propose a two-step iterative algorithm to maximize the sum throughput of the users in a MIMO WPCN with discrete signal inputs. Firstly, the optimal solution of a convex power allocation problem can be found given a fixed time allocation; Secondly, a semi closed form solution for the optimal time allocation is obtained when fixing the power allocation matrix. By optimizing the power allocation and time allocation alternately, the two-step algorithm converges to a local optimal point. Simulation results show that the proposed algorithm outperforms the conventional schemes, which consider only Gaussian inputs.

This paper proposes a novel low complexity lattice reduction-aided iterative receiver for overloaded MIMO. Novel noise cancellation is proposed that increases an equivalent channel gain with a scalar gain introduced in this paper, which results in the improvement of the signal to noise power ratio (SNR). We theoretically analyze the performance of the proposed receiver that the lattice reduction raises the SNR of the detector output signals as the scalar gain increases, when the Lenstra-Lenstra-Lova's (LLL) algorithm is applied to implement the lattice reduction. Because the SNR improvement causes the scalar gain to increase, the performance is improved by iterating the reception process. Computer simulations confirm the performance. The proposed receiver attains a gain of about 5dB at the BER of 10^-4 in a 6×2 overloaded MIMO channel. Computational complexity of the proposed receiver is about 1/50 as much as that of the maximum likelihood detection (MLD).

In order to solve the problem in Automatic Identification System (AIS) that the signal in the target slot cannot be correctly received due to partial overlap of signals in adjacent time slots, the paper introduces a new criterion: maximum expected signal power (MESP) and proposes a novel beamforming algorithm based on generalized singular value decomposition (GSVD) and orthogonal projection. The algorithm employs GSVD to estimate the signal subspace, and adopts orthogonal projection to project the received signal onto the orthogonal subspace of the non-target signal. Then, beamforming technique is used to maximize the output power of the target signal on the basis of MESP. Theoretical analysis and simulation results show the effectiveness of the proposed algorithm.

In this paper, we investigate different power allocation optimization problems with interferences for distributed antenna systems (DAS) with and without D2D communication, respectively. The first objective problem is maximizing spectral efficiency (SE) of the DAS with D2D communication under the constraints of the minimum SE requirements of user equipment (UE) and D2D pair, maximum transmit power of each remote access unit (RAU) and maximum transmit power of D2D transmitter. We transform this non-convex objective function into a difference of convex functions (D.C.) then using the concave-convex procedure (CCCP) algorithm to solve the optimization problem. The second objective is maximizing energy efficiency (EE) of the DAS with D2D communication under the same constraints. We first exploit fractional programming theory to obtain the equivalent objective function of the second problem with subtract form, and then transform it into a D.C. problem and use CCCP algorithm to obtain the optimal power allocation. In each part, we summarize the corresponding optimal power allocation algorithms and also use similar method to obtain optimal solutions of the same optimization problems in DAS. Simulation results are provided to demonstrate the effectiveness of the designed power allocation algorithms and illustrate the SE and EE of the DAS by using D2D communication are much better than DAS without D2D communication.

A Brillouin optical correlation domain reflectometry (BOCDR) system, which can set measuring point to arbitrary distance that is aligned in a random order along an optical fiber (i.e., random accessibility), is proposed to measure dynamic strain and experimentally evaluated. This random-access system can allocate measurement bandwidth to measuring point by assigning the measurement times at each measuring point of the total number of strain measurements. This assigned number is not always equally but as necessary for plural objects with different natural frequencies. To verify the system, strain of two vibrating objects with different natural frequencies was measured by one optical fiber which is attached to those objects. The system allocated appropriate measurement bandwidth to each object and simultaneously measured dynamic strain corresponding to the vibrating objects.