Two new partially saturated tricyclic ring systems, , a, 7, , , 10, 10a, 11-octahydro-11-oxodibenz [, ] oxepins (3a and 3), and -thiepins (a and ) were synthesized. Compounds a and were desulfurized to give a pair of isomeric 2-methylbenzoylcyclohexanes (10a and 10). Deuterated a and (11a and 11) were prepared starting from butadiene- (12). The stereochemical features of 3a (trans), 3 (cis), a (trans) and (cis) are compared with those of 10a, 10, 11a and 11 on the basis of proton nuclear magnetic resonance data.

抄録全体を表示

The main objective of this paper is to compare safety factors obtained from Morgenstern-Price, Janbu and Spencer methods with the factors calculated from the modified variational approach (Leshchinsky and Huang, 1992a). Such comparison is essential since there is no mathematical proof that the variational analysis indeed yields a minimum and thus, physically produce significant results. The safety factors compared well, indicating the variational analysis is on a par with acceptable existing rigorous methods. Availability of a user-friendly computer code may make the variational analysis useful to practicing engineers. However, its greatest potential at the moment is in 3-D applications; i.., unlike other methods, its extension to 3-D is straightforward.

抄録全体を表示

11-Amino-, a, 7, , , 10, 10a, 11-octahydrodibebenzo[, ]thiepines (a-d) and -oxepines (7a-d) were synthesized by the Leuckart reaction of , a, 7, , , 10, 10a, 11-octahydro-11-oxodibenzo[, ]thiepines (1a, )and -oxepines (2a, ) followed by hydrolysis of the reaction products a-d and a-d, respectively. The four diastereomers, cis(a-H, 10a-H)-cis(10a-H, 11-H) a and 7a, cis(a-H, 10a-H)-trans(10a-H, 11-H) and 7, trans(a-H, 10a-H)-trans(10a-H, 11a-H)c and 7c, and trans(a-H, 10a-H)-cis(10a-H, 11-H) d and 7d, were isolated and their configurations and conformations were elucidated by chemical methods together with ¹H-nuclear magnetic resonance spectroscopic and X-ray crystallographic analyses.

抄録全体を表示

A procedure for limit equilibrium slope analysis based on a realistic consideration of the mobilized interslice shear forces is presented in this paper. This new approach ensures that solutions are kinematically admissible and the possibility of convergence problems, often associated with numerical solutions, is minimized. The proposed approach recognizes the importance of slip surface geometry in estimating interslice shear forces whether vertical or non-vertical slices are used in a limit equilibrium analysis. Illustrative examples are presented and the results shown to be reasonable. The calculated factors of safety based on the new method compare very well with values based on recognized methods of analysis. Yet the method is more direct and enables a proper visualization of the transfer of mobilized normal and shear forces through a sloping soil mass above a potential slip surface. The method also gives consistent results with non-vertical slices even if the shape of non-vertical slices is varied.

抄録全体を表示

Six full-length cDNAs encoding pig cytochrome P450 (CYP) enzymes, CYP1A1, CYP2A19, CYP2, CYP2C33v, CYP2C49, and CYP21, were isolated and sequenced. The cDNA sequences of pig CYP1A1, CYP2A19, CYP2, CYP2C49, and CYP21 showed high similarity to human CYP1A1 (.%), CYP2A13 (.%), (81.1%), CYP2C18 (.3%), and (82.%), respectively, and pig cDNA showed high similarity to rat CYP2C23 (79.2%). Reverse transcription-polymerase chain reaction (RT-PCR) assays revealed hepatic gene expression of all these pig CYP enzymes: the order of expression was and > CYP2C49 > CYP1A1 and CYP2A19 > . In the kidney, the gene was expressed at the same level as in the liver, but the CYP1A1, CYP2A19, and genes were expressed at lower levels than in the liver. Little renal gene expression of CYP2C49 and CYP21 was observed. We revealed for the first time the full-length cDNA sequences encoding pig CYP1A1 and five CYP enzymes belonging to the CYP2 gene family, thus making it possible to examine the gene expression levels of these CYP enzymes in pig tissues by RT-PCR.

抄録全体を表示

This study was performed to clarify which factors affected damage to tame-ike (small embankment dams for irrigation) in Hokudan Town as a result of the January 17, 1995 Hyogoken-Nambu earthquake. Factors were assumed to be : Location (.g., Distance to Epicenter, etc.), Structure (.g., Angle to Nearest Fault, Embankment Volume, etc.), Soil Properties of Embankment, Geology of Dam Site and History (Era of Construction, Repaired, etc.). Multivariate statistical analyses were performed for documentary data (damaged : 181, undamaged : 328). Ordinary statistical analyses were conducted for the data investigated in situ for soil properties of the embankment. The results show that the factors causing damage to dam are : (1) Nearest Fault (Nojima, Mizukoshi and D2), (2) Distance to Nearest Fault (less than 500 m), (3) Distance to Epicenter (approximately to 14 km, which almost agrees with the location of seismic intensity 7 JMA), () Elevation of Dam Site (higher than 100 m), () Embankment Volume (the greater the volume the more damage was caused), () Direction of Dam Axis (normal or diagonal to the epicenter or to nearest the fault), (7) Plan View of Dam Axis (3 or axes), () Surface Geology of Dam Site (non-cohesive soil type ground), () Era of Construction (prior to 1891) and (10) Soil Properties of Embankment (sand, not silty sand or gravel, penetration resistance that is 10% smaller than the undamaged dams).

抄録全体を表示

A new analytical method is proposed for determining the inextensible grid reinforcement pullout resistance and pullout force/pullout displacement curve by using basic backfill soil and grid reinforcement properties. The pullout skin friction resistance/pullout displacement relationship is simulated by linear elastic-perfectly plastic model. A hyperbolic model has been proposed to represent the pullout bearing resistance/pullout displacement relationship in which the maximum bearing resistance of a single bearing member is determined using a new bearing capacity equation proposed in this paper. The influences of the grid bearing member spacing ratio, S/D, the bearing member deflection rigidity, and the pullout softening behavior on the mobilization of pullout bearing resistance are explicitly included in the proposed model. Good agreement has been obtained between calculated values and laboratory test results.

抄録全体を表示

The correction factor (η_ie) for the ultimate bearing capacity of a footing placed adjacent to a slope, taking into account the combined effect of horizontal and vertical seismic loads, represented by horizontal and vertical seismic coefficients, k_h and k_v, respectively, was derived using a modified Janbu's slice method. The influence of slope angles ‘α’ on the values of ‘η_ie’ are studied here. It was found that the values of η_ie can be expressed as an exponential function of ‘k_h/(1-k_v)’ and ‘α’, with a measurable interdependency between ‘α’ and ‘η_ie’. The influence of ‘α’ on the value of ‘η_ie’ increases as the input value of ‘k_h/(1-k_v)’ increases. Equations derived based on the analytical results are proposed to account for this effect. Based on the analyses of 11 near-fault seismographers obtained in the 1999 Chi-Chi earthquake in Taiwan, a ratio between the vertical and the horizontal seismic coefficients, λ, of between ±0.25 is suggested for including the combined effect of vertical and horizontal seismic forces in evaluating the seismic bearing capacity of footings located in near-fault areas.

抄録全体を表示

At present, analytical or empirical formula for seismic bearing capacity of footings adjacent to slopes is not available. This study uses a pseudo-static-based approach in conjunction with rigorous Janbu's slice method to derive analytical values of seismic bearing capacity factors (N_γ) and correction factors for the effects of inertia of soil mass and load inclinations for a rigid footing adjacent to cohesionless slopes. It is shown that both the bearing capacity factors (N_γ) and the correction factors for the seismic bearing capacity of footings placed on level ground derived herein are comparable with those reported in the literature. Empirical equations regarding the effects of slope angles and load inclinations, expressed using generalized forms of those proposed in the literature, are also derived. It is also found that the empirical equations derived in the present study provide values of correction factors in good agreements with the analytical ones, indicating the validity of using these empirical equations for assessing the bearing capacity of rigid footings situated on the slope subjected to pseudo-static seismic loading.

抄録全体を表示

The phase diagrams of the Ni-Mo- and Ni-W- ternary systems in the region of less than 50mol% were constructed by thermodynamic calculation, based on the data obtained by thermodynamic measurement of the related materials. We found three ternary eutectic points and three or two ternary peritecto-eutectic points as follows:
:L (1365K, 71.mol%Ni-.0mol%Mo-.mol%)=(Ni)++
:L (1355K, 62.mol%Ni-2.mol%Mo-30.mol%)=++
:L (1445K, 42.0mol%Ni-30.mol%Mo-10.3mol%)=(Ni)+NiMo+
P₁:L (1812K, 34.mol%Ni-42.3mol%Mo-.mol%)+MoB=+
P₂:L (1633K, 42.3mol%Ni-40.mol%Mo-17.3mol%)+Mo=+
P₃:L (1812K, 53.mol%Ni-33.7mol%Mo-12.mol%)+Mo=NiMo+
:L (1622K, 51.0mol%Ni-31.mol%W-17.mol%)=(Ni)+W+
:L (1260K, 71.0mol%Ni-7.0mol%W-.0mol%)=(Ni)++
:L (1291K, 65.mol%Ni-.mol%W-29.mol%)=++
P₁:L (2115K, 23.mol%Ni-43.1mol%W-33.1mol%)+WB=+
P₂:L (1657K, 48.mol%Ni-33.1mol%W-18.0mol%)+=W+
The calculated phase diagrams are expected to be useful for the development of new Ni-based heat-, corrosion- or wear-resistance alloys.

抄録全体を表示

Two new polyacetylene compounds (, , 12)-1-acetoxy-3-isovaleryloxytetradeca-, , 12-trien-, 10-diyn-14-ol (), and (, , 12)-1-acetoxy-3-(2-methylbutyryloxy)tetradeca-, , 12-trien-, 10-diyn-14-ol (C) have been isolated along with (, , 12)-1-acetoxy-3-senecioyloxytetradeca-, , 12-trien-, 10-diyn-14-ol (A) from Atractylodes Rhizome (Karabyakujutu). The structures of these compounds were determined on the basis of their spectral data.

抄録全体を表示

Tumor-infiltrating lymphocytes (TIL) were tested for cytotoxicity against autologous tumor cells in a study utilizing a chemically induced cancer ofthe bladder (transitional cell carcinoma), -47, in inbred ACI/N rats. From tumors grown after subcutaneous implantation of -47 in the rats TIL were separated by density gradient centrifugation and incubated in plastic dishes for separation of non-adherent from adherent cells. The non-adherent cells were further fractionated into T and cells by the panning method using anti-rat F(ab')₂ antibody. The cell fractions were each added to -47 in culture to be assessed for antitumor effect by the crystal violet dye exclusion method and 3H-thymidine incorporation inhibition assay. Peripheral blood mononuclear cells (PBMC) were also tested as described above. TIL expressed significantly higher cytotoxicity against -47 with the mean % cytotoxicity of 56.±.% and 87.±7.1% at /T ratios of 10:1 and 20:1, respectively, as compared to PBMC(.±.0% at /T 10:1) (P<0.001). The adherent cells, and T cell fractions showed respective % cytotoxicity of 92.±2.%, 57.±10.% and .±7.% at an /T ratio of 10:1. TIL pretreated with IFN or rIL-2 for 24or 48 hours did not exhibit any noticeably enhanced antitumor activity at an /T ratio of :1. Prevention of direct contact of -47 cells and TIL by an interposed Millipore membrane (0.45μm) resulted in an unequivocal reduction of antitumor effect. This finding clearly indicates that the direct contact with -47cells and TIL is necessary for TIL to manifest their cytotoxicity against the autologous tumor cells, suggesting that TIL exhibit autologous tumor killing activity through cell-mediated cytotoxicity.

抄録全体を表示

This paper presents the results of 24 centrifuge model tests of nailed soil slopes and vertical walls, constructed out of dry Leighton buzzard sand. The walls were initially supported by fluid pressure from flexible rubber bags against the face, and excavation was modelled by gradually draining the fluid from the bags. The finished model walls were 200 mm high and were initially tested at 30 g acceleration to correspond to a prototype structure .0 m high. If failure was not obtained, the acceleration was increased progressively to a maximum of g. No surcharges were applied. The main parameters varied in the tests were the wall slope, nail length, nail surface roughness, nail inclination, facing stiffness and facing roughness. Observations were made of the mechanism of failure when it occurred, of soil pressures on the facing, and of pre-failure deformations. Failure was always by pull-out rather than breakage of the nails, and a series of pull-out tests of the model nails was conducted to aid interpretation of the results. Failure surfaces were seen to have the shape of logarithmic spirals, and limit equilibrium analyses based on these surfaces agreed well with experimental observations. Prior to failure, earth pressures on the facing compared reasonably well with those calculated by Coulomb's method, except at the base of the wall. One test set out to model a full-scale trial wall, and although the construction process could not be exactly modelled in the small-scale centrifuge tests, comparisons were sufficiently good to give confidence in the model test results.

抄録全体を表示

This paper deals with the overall stability of an embankment foundation failure that lies at km 40+700 of the new Irbid-Amman Highway in Jordan. Slope stability back analysis was carried out for the slope to assess the conditions at time of failure, and estimate most representative shear strength parameters of foundation materials. Slope stability analysis was also carried out for proposed remedies. Probabilistic seismic hazard analysis was carried out for the landslide site. Peak Ground Acceleration (PGA) value of 0.2 g was estimated for design. This corresponds to a 90% probability of non-exceedence in a 50 year design life of the highway. Pseudo-static slope stability analysis was also carried out. The study concluded that the landslide movement occurred within the foundation colluvium material. It resulted primarily from the excessive load of the embankment and excess piezometric pressures generated within the slope. The most feasible remedial measure to stabilize the landslide area was removal of existing failed embankment down to the top of sandstone layer, and reconstruction (using imported free-drainage rockfill) of a split level embankment together with the construction of surface and subsurface drainage system. These measures were successfully implemented in the field.

抄録全体を表示

To remove some weak points of the limit equilibrium slope stability method, the authors have tried so far to develop a hybrid slope stability analysis method, in which stress and strain developed in a slope are determined by the finite element method, while the basic concept of the limit equilibrium method is adopted in the overall stability analysis. In this paper, first, the theory behind the hybrid slope stability analysis method is presented, together with the comparison of the proposed hybrid method and the conventional Bishop's method. Then, reinforcement mechanism and stability characteristics of the reinforced slope cutting are examined through numerical examples by the proposed method. Finally, practical application of the proposed method to an in-situ reinforcement slope stabilization project is presented. In consequence, the applicability and simplicity of the proposed method to the practical design works of reinforcement slope stabilization are demonstrated in success.

抄録全体を表示