The ability of Climacodon septentrionalis to immobilize and kill a mycophagous nematode (Aphelenchoides sp.) in vitro is described for the first time. Two isolates produced droplets (20–45 μm in diameter) that formed at the apices of tall, stalked, and branching secretory cells (700–

,500 μm tall). On 2% modified malt extract agar, nematodes became enveloped in the droplets, which restricted their ability to move and resulted in complete immobilization and death within several hours of contact. The rate of decomposition of the nematodes varied considerably, with most individuals persisting for weeks whereas others were degraded within several days and appeared to be colonized by dense hyphal growth. This study provides the first documentation of a non-agaricoid fungus producing secretory cells that are able to immobilize nematodes.

抄録全体を表示

The possibility of attenuation of microseismic waves due to the presence of an upward folding of the ocean bottom into the liquid is discussed in this paper. The upward folding of the ocean bottom has been idealized by means of an irregularity in the form of a rectangle intruding into the liquid and the evaluation of the displacement component at any point of the solid medium has been carried out in two stages. First, the change in the incident mode of the surface wave due to the presence of the rectangular irregularity has been determined, and second, the subsequent change of the resulting displacement components due to the termination of the liquid layer and the step change in elevation of the solid medium at the continental margin has been discovered. Finally, numerical calculation has been made to determine the attenuation of the microseismic waves of different periods due to the presence of the rectangular irregularity at the ocean bottom.

抄録全体を表示

2-Benzyl--chloro--mercapto-3 (2H)-pyridazinone () was heated in ethanol under reflux for 10 hours to form concurrently 2, -dibenzyldipyridazo [, - : ', '-]-, -dithiin-, (2H, H)-dione (Ia) (57% in yield) and 2, -dibenzyldipyridazo [, - : ', '-]-, -dithiin-, (2H, H)-dione (IIa) (14% in yield). Assignment of the two products to the corresponding structures is established by their physico-chemical constants and chemical behaviors. The concurrent formation of the dipyridazo [, - : ', '-]-, -dithiin-, (2H, H)-dione and the -, (2H, H)-dione were observed in, not only heating -chloro--mercapto-3 (2H)-pyridazinones (-3) in polar solvent, but warming -mercapto--chloro-3 (2H)-pyridazinones (-) in the presence of potassium carbonate in DMF. For the interpretation of the reaction, keto-thioketo carbenes as active intermediate species and a reversible interconversion among them are suggested on the basis of the fact that there was nonexistence of an equilibrium between the two compounds, such as Ia and IIa, under the reaction condition and a trapping keto-thioketo carbene species as 2-phenylimino--benzylpyridazo [, -]-, 3-dithiol- (H)-one (IVa) (14% in yield) along with the major products, (Ia) and (IIa), was furnished by warming with phenylisothiocyanate in the presence of triethylamine in dry benzene. On the contrary, participation of a reversible interconversion between Ia and IIa, to a considerable extent, with the concurrent formation of them in the case of benzylation of either Ib or IIb, by warming with benzylchloride in the presence of potassium carbonate in DMF at 80°, might not be neglected, because an attempted approach to an equilibrium between Ia and IIa in a similar reaction condition except the use of benzylchloride realized, whereas non-existence of an equilibrium between Ib and IIb in the similar reaction condition was observed.

抄録全体を表示

A boron treated copper bearing HSLA steel containing austenite formers like manganese and nickel, somewhat lower in amount than that in HSLA 100 variety of steel is chosen for the study. The role of thermomechanical processing on the microstructure and mechanical properties of the above steel has been investigated. Differential scanning calorimetric study is carried out for understanding the precipitation behaviour of copper in HSLA steel under the influence of boron. The microstructure of the experimental steel is found to consist of laths of martensites and bainite. MA constituents of ribbon like morphology are observed at the lath boundaries. Higher strength properties of the steel are attributed to the presence of finely distributed precipitates of copper and microalloy carbides.

抄録全体を表示

Natural sedimentary clays exhibit ageing effects on their behaviour when subjected to both consolidation and shearing. Attempts to characterising the in-situ 'structure'of soft marine clays have been made in case studies performed in Ariake (Japan) and in Bangkok (Thailand), each showing a typical profile of aged clay-structure with depth reflecting its site-specific geological consolidation history. In each site, profiles of Atterberg limits, natural water content, overconsolidation ratio (OCR), quasi-elastic shear modulus G_max and the undrained shear strength c_u with depth were attained from various laboratory tests, together with the a comparable profile of quasi-elastic shear modulus from insitu seismic survey G_f. Quantitative assessment of the aged clay-structure was made by using two different measures, metastability index MI (G) and the soil constant reflecting structure S (Jamiolkowski et al., 1994). The profiles of MI (G) and the S-value with depth were both determined based on the corresponding G_max behaviour of the reconstituted sample. "Disturbance"of laboratory samples retrieved by using two different samplers (i.., Laval and Japanese thin-walled samplers) with two different sampling techniques (i.., pre-boring and displacement methods) was discussed. A new approach to estimate c_u"in the ground", termed by the authors the MILK (Metastability Index coupled with Laboratory K_o test) method, is proposed. A trial of the MILK-method is demonstrated in soft Bangkok clay, the texture of which is similar to "soft cheese".

抄録全体を表示

An empirical equation in use for estimating the pseudo-elastic shear modulus, G_f, of subsoil, associated with shear strains less than .001% is proposed in this paper. In a series of in-situ seismic cone tests performed nationwide, the profiles of both G_f and the in-situ void ratio, , with depth were successfully characterised at five sites, each comprising a soft clay layer deposited in the Holocene era. The database which comprised the original data from the field and laboratory tests, coupled with similar information on well-documented Holocene clay deposits in Europe, was statistically analyzed in attempts to determine a generalised relationship with which G_f of soft clay may be reasonably estimated only from routinely available borehole data; that is and the current geostatic effective overburden pressure, σ'_v. An empirical relationship, G_f=, 000 -√(σ'_v) (kPa), was derived from the statistical analysis applied to data from seven different clays worldwide, for which extended over a range between and , and the overconsolidation ratio ranged roughly between and 2. The applicability of the proposed relationship was evaluated for two case records, each in which the clay exhibited unusual behavior; i.., the undrained shear strength remained more or less constant with depth due to the existence of artesian pressure at one site, and, at the other, G_f decreased, whereas increased, with depth. It was demonstrated that even in these clay deposits exhibiting exceptional profiles, the proposed relationship was capable of predicting G_f with a reasonable accuracy by determining the profiles of and σ'_v with depth. In addition, the prediction when compared to G_max from carefully performed laboratory cyclic tests, yielded a better estimate of G_f from the in-situ seismic survey. Despite the fact that the empirical relationship was initially designated to estimate G_f of soft clays, it may be equally applicable to sandy deposits. This was verified by comparing it to similar, and well-established, relationships developed for sands. A case record as such is also described for a loose sand deposit at Higashi-Ohgishima in Tokyo Bay which was placed in 1960's by land reclamation.

抄録全体を表示

カンキツ主要12種を用いて染色体のクロモマイシン A₃(CMA) 染色を行った．染色体は CMA(+) バンドの有無および位置から 種類に区分できた．すなわち，CMA(+) を A: 両端および動原体近傍に有する，: 一方の端部と動原体近傍に有する，C: 両端に有する，: 一方の端部に有する，: CMA(+) がない，: 動原体近傍に有する，Dst: 付随染色体を有する 型，である．各種はこれらのうち 2～ 種類の染色体を有し，独自の CMA バンドパターンを示した．C. medica では 2 + + ，C. limon では + C + + ，C. aurantifolia では 2 + + ，C. aurantium では A + + C + + ，C. sinensis では 2+ 2C + + ，C. maxima では 3A + 3C + + ，C. paradisi では 2A + 3C + + ，C. ichangensis では 2 + 2C + 12 + 2，C. latipes では 2A + C + + 3，C. micrantha では + 11 + + 2Dst，C. macroptera では 2 + C + 11 + 3 + ，C. hystrix では 3 + C + + 3 + 2 + Dst であった．

抄録全体を表示

Two new partially saturated tricyclic ring systems, , a, , , , 10, 10a, 11-octahydro-11-oxodibenz [, ] oxepins (3a and 3), and -thiepins (a and ) were synthesized. Compounds a and were desulfurized to give a pair of isomeric 2-methylbenzoylcyclohexanes (10a and 10). Deuterated a and (11a and 11) were prepared starting from butadiene- (12). The stereochemical features of 3a (trans), 3 (cis), a (trans) and (cis) are compared with those of 10a, 10, 11a and 11 on the basis of proton nuclear magnetic resonance data.

抄録全体を表示

A sample of [³H] tobrarnycin (, 000 Ci/Mole) has been synthetized and incubated with
the bacterial ribosome and its subunits. The results obtained show that this antibiotic has
two types of binding sites. The primary one is probably responsible for the inhibition of
protein synthesis whereas the secondary one is probably related to the misreading and reading
tiirough of the messenger RNA.

抄録全体を表示

We observed transients during the isotopic analysis of carbon dioxide, which could not be attributed to mixing processes because of their asymmetry, and to explain these we were led to consider the effects of diffusion on gas flow in the sample line. In particular, we investigated the propagation by diffusion of a concentration anomaly against a steady gas flow. If fractionation of isotopic(or chemical)species at the leak is to cause a change with time of the composition of the gas in the sample reservoir, then the effects of the fractionation must diffuse backwards as far as the gas reservoir.Using a one-dimensional Green's function, we obtained explicit analytical functions for the steady state concentration variation along a connecting tube between the leak and the reservoir, and for the composition variations with time at the leak. It is shown that the isotopic composition in the sample reservoir need not vary with time, even with a fractionating leak, provided that bulk gas velocity in the connecting tube is large enough. It is also shown that the diffusion process in combination with a fractionating leak can lead to the type of transients we observed.

抄録全体を表示

In this paper, consideration is given as to how to characterize depth-variation for the small-strain shear modulus of natural clay sedimentation, in a state of normal consolidation. A case study was carried out for a relatively uniform clay layer deposited in the Holocene era. Initially, the effects of both strain and in-situ stress levels on secant shear modulus were carefully examined in cyclic torsion shear tests using undisturbed samples, which were recovered at different depths in a test borehole. The range of shear strain examined was between .001% and %. Similar examination was made for a silty clay using reconstituted samples that were isotropically consolidated at different stress levels. On the basis of the results of these laboratory tests, together with the shear modulus from an in-situ seismic survey, the small-strain shear modulus was formulated in terms of the stress and strain levels, and linked also to undrained shear strength. Interactions of the small strain stiffness between in-situ and laboratory are discussed in depth with an attention paid to the existing aging effect in the original subsurface condition.

抄録全体を表示

The effect of composition and controlled thermomechanical process parameters on the mechanical properties of HSLA steels is modelled using the Widrow-Hoff's concept of training a neural net with feed-forward topology by applying Rumelhart's back propagation type algorithm for supervised learning, using a Petri like net structure. The data used are from laboratory experiments as well as from the published literature. The results from the neural network are found to be consistent and in good agreement with the experimented results.

抄録全体を表示

Horizontal plate anchors are widely used in civil engineering constructions to resist vertical pulling loads. The available theoretical model suggested by Vesic to estimate the breakout resistance of plate anchors is in significant error, particularly for dense sandy soils. A theoretical model assuming a curved surface of failure through the surrounding soil, to evaluate the ultimate breakout resistance of horizontal plate anchors, has been proposed. It successfully brings out the concept of characteristics relative depth beyond which the breakout factor reaches a constant final value. It is capable of predicting breakout factors for wide range of values of angle of shearing resistance of sand.

抄録全体を表示

An unsupervised learning technique and an associative memory have been used for encoding weights by a special type of Petri network named Petri neural net for modelling the influence of alloying elements on the final property of the high strength low alloy steel. The combined effects of alloying elements for different strengthening mechanisms is predicted when weights and threshold values are chosen on the basis of metallurgical understanding. The technique is found to be effective to create an associative memory of input-output relations in unknown data sets so that the same can be subsequently be used as a predictive tool.

抄録全体を表示

Primarily from the point of view of improvement of yield strength due to additions of niobium, titanium and boron in HSLA steels, the experimental steels are divided into five classes. The data are then supplied for learning a Self Organising Map (Kohonen network). It is found that the network with six neurons possesses better capacity of prediction with unknown data. Another effort of clustering the steels according to its major strength contributing mechanisms is also made. But the capacity of the network to cluster unknown data is found to be rather poor and has failed to follow from the metallurgical principles. To avoid this limitation, Learning Vector Quantisation method is adopted to impart a certain amount of supervision in the learning process and it is found that the training pattern of the network attains a good convergence thereby leading to a good predictive ability.

抄録全体を表示