The ability of Climacodon septentrionalis to immobilize and kill a mycophagous nematode (Aphelenchoides sp.) in vitro is described for the first time. Two isolates produced droplets (20–45 μm in diameter) that formed at the apices of tall, stalked, and branching secretory cells (700–1,500 μm tall). On 2% modified malt extract agar, nematodes became enveloped in the droplets, which restricted their ability to move and resulted in complete immobilization and death within several hours of contact. The rate of decomposition of the nematodes varied considerably, with most individuals persisting for weeks whereas others were degraded within several days and appeared to be colonized by dense hyphal growth. This study provides the first documentation of a non-agaricoid fungus producing secretory cells that are able to immobilize nematodes.

抄録全体を表示

The behavior of the soft clay grounds subjected to repeated loading is different from that subjected to sustained loading. The difference in settlement between these two loading patterns should be due to secondary compression over a long period of time. Consequently, soft clay grounds subjected to repeated loading tend to be more compressible than those subjected to sustained loading. Therefore, it is necessary for engineers to predict post-construction settlements under repeated loading. In this respect, the preloading is considered to be promising as a countermeasure to reduce the settlement of clay under repeated loading as well as under sustained loading. The effect of preloading on post-construction consolidation settlement of soft clay subjected to repeated loading after removal of a part of preload is investigated in the present paper. It has become clear that the settlement of a clay sample after preconsolidation is mainly affected by the amount of preload, the degree of consolidation due to the preload, the amount of permanent load and the amount of repeated load after removal of preload. The calculated settlement versus time relations using a method to estimate the amount of consolidation settlement of soft clay grounds subjected to repeated loading after removal of preloading were compared with the observed degree of consolidation as parameters of the intensities of preload and repeated load.

抄録全体を表示

A boron treated copper bearing HSLA steel containing austenite formers like manganese and nickel, somewhat lower in amount than that in HSLA 100 variety of steel is chosen for the study. The role of thermomechanical processing on the microstructure and mechanical properties of the above steel has been investigated. Differential scanning calorimetric study is carried out for understanding the precipitation behaviour of copper in HSLA steel under the influence of boron. The microstructure of the experimental steel is found to consist of laths of martensites and bainite. MA constituents of ribbon like morphology are observed at the lath boundaries. Higher strength properties of the steel are attributed to the presence of finely distributed precipitates of copper and microalloy carbides.

抄録全体を表示

The possibility of attenuation of microseismic waves due to the presence of an upward folding of the ocean bottom into the liquid is discussed in this paper. The upward folding of the ocean bottom has been idealized by means of an irregularity in the form of a rectangle intruding into the liquid and the evaluation of the displacement component at any point of the solid medium has been carried out in two stages. First, the change in the incident mode of the surface wave due to the presence of the rectangular irregularity has been determined, and second, the subsequent change of the resulting displacement components due to the termination of the liquid layer and the step change in elevation of the solid medium at the continental margin has been discovered. Finally, numerical calculation has been made to determine the attenuation of the microseismic waves of different periods due to the presence of the rectangular irregularity at the ocean bottom.

抄録全体を表示

The phase diagrams of the Ni-Mo- and Ni-W- ternary systems in the region of less than 50mol% were constructed by thermodynamic calculation, based on the data obtained by thermodynamic measurement of the related materials. We found three ternary eutectic points and three or two ternary peritecto-eutectic points as follows:
:L (1365K, 71.mol%Ni-6.mol%Mo-.mol%)=(Ni)++
:L (1355K, 62.mol%Ni-2.mol%Mo-30.mol%)=++
:L (1445K, 42.mol%Ni-30.6mol%Mo-10.mol%)=(Ni)+NiMo+
P₁:L (1812K, 34.mol%Ni-42.mol%Mo-.mol%)+MoB=+
P₂:L (1633K, 42.mol%Ni-40.4mol%Mo-17.mol%)+Mo=+
:L (1812K, 53.mol%Ni-33.mol%Mo-12.mol%)+Mo=NiMo+
:L (1622K, 51.mol%Ni-31.6mol%W-17.4mol%)=(Ni)+W+
:L (1260K, 71.mol%Ni-.mol%W-.mol%)=(Ni)++
:L (1291K, 65.4mol%Ni-4.mol%W-29.mol%)=++
P₁:L (2115K, 23.mol%Ni-43.1mol%W-33.1mol%)+WB=+
P₂:L (1657K, 48.mol%Ni-33.1mol%W-18.mol%)+=W+
The calculated phase diagrams are expected to be useful for the development of new Ni-based heat-, corrosion- or wear-resistance alloys.

抄録全体を表示

In view of the significant role of the water film effect in flow failure for a liquefied sandy deposit, the mechanism of water film generation is numerically studied based on a 1-dimensional model test. The process of water film growth and decay can be simulated to a certain extent by a simple consolidation analysis, which indicates that only a small difference in permeability in layered sand is enough for a water film to develop. A 1 G shaking table test for a two-dimensional slope model with an arc of silt within a saturated sand is then addressed to discuss the dilatancy effect exerted in sheared sand during flow failure. It is possible that, once the water film is formed, the transmission of shear stress through it is interrupted, leaving the sand below free from the dilatancy ; this eventually allows the water film to stay without being absorbed during flow failure. The result of another shaking table test for a trapezoidal slope with horizontal silt seams indicate that water films beneath the seams enable the soil mass above them to laterally flow along water films very gently inclined even after shaking. If a silt seam breaks due to excessive pressure in the water film, it triggers re-liquefaction in the upper sand and leads to further instability.

抄録全体を表示

This study aimed to determine the prevalence of fecal carriage of extended spectrum β-lactamase (ESBL) and/or plasmidic AmpC β-lactamase (pAmpC) producing Escherichia coli among dogs (n=428) in Turkey. Polymerase chain reaction (PCR) and sequencing were used to characterize genes encoding β-lactamase and plasmid mediated quinolone resistance (PMQR). Antimicrobial susceptibility testing and PCRs for virulence genes and phylogenetic groups were also performed. Cefotaxime resistant

. coli isolates were detected in 95 (.2%) of the swab samples. Sequencing analysis results showed occurrence of various β-lactamase genes: bla_CTX-M-15 (62), blaTEM-

1b

(42), bla_CMY-2 (

22

), blaCTX-M-

3

(16), bla_CTX-M-1 (15), bla_OXA-1 (

9

) and bla_SHV-12 (

3

) alone or in combination. The most frequently encountered phylogenetic group was group A₁ (35.

8

%), followed by group

D₂

(

22

.1%),

B

1 (15.

8

%),

D₁

(

9

.

5

%),

A₀

(

7

.4%),

B2₂

(

5

.

3

%) and

B2₃

(4.2%), respectively. PMQR genes, aac(6’)-Ib-cr, qnrS1 and qnrB10 were detected in 25.

3

, 10.

5

and 1.1% of the isolates, respectively. While all isolates were susceptible to imipenem and amikacin, resistance rates to non-β-lactam antibiotics ranged from 20.

0

% for tobramycin to 56.

8

% for tetracycline. The virulence genes were only detected in 34 (36.2%) of the isolates and this isolates carried single or various combination of virulence genes of iucD, papC, papE, f17a-A and eaeA. Four isolates were identified as human virulent pandemic CTX-M-15 producing

E

. coli clone O25

b

:ST131/

B

2. To the best of our knowledge, this is the first study to show fecal carriage of ESBL/pAmpC type β-lactamase producing

E

. coli isolates among dogs in Turkey.

抄録全体を表示

Activity-directed isolation of the ethyl acetate, methylene chloride and n-hexane fractions of Gloiopeltis furcata resulted in the isolation of 18 compounds. Their structures were elucidated as 2-(-hydroxy--oxotetrahydrofuran--yl)acetic acid (1), glutaric acid (2), succinic acid (), nicotinic acid (4), ()-4-hydroxyhex-2-enoic acid (), cholesterol (6), -hydroxycholesterol (), uridine (), glycerol (), -(hydroxymethyl)-2-methoxybenzene-1,-diol (10), (,)--oxodeca-,-dienoic acid (11), (Z)--ethylidene-4-methylpyrrolidine-2,-dione (12), dehydrovomifoliol (13), loliolide (14), cholesteryl stearate (15), palmitic acid (16), cis-,,11,14,17-eicosapentaenoic acid (17) and α-linolenic acid (18) on the basis of spectroscopic and chemical evidences. Their anticholinesterase and antioxidant activities were evaluated via inhibitory activities on acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) as well as scavenging activities on 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical and peroxynitrite (ONOO⁻). All isolated compounds (1—18) exhibited moderate AChE inhibitory activities with IC₅₀ values ranging from 1.14—12.50 μg/ml, whereas 1, , , 17, and 18 showed mild BChE inhibitory activities with IC₅₀ values ranging from .57—15. μg/ml. Although most of the compounds isolated were lacking the scavenging activity on DPPH radical and ONOO⁻, and 10 showed good DPPH radical scavenging activity, and , 10, and 16 showed potent ONOO⁻ scavenging activity.

抄録全体を表示

In this study, we have tried to prepare porous ceramics with potato starch as a pore-forming agent at relatively low sintering temperatures by reactive sintering method using fine-grained starting materials. α- powder (.1 µm) and TiO₂ rutile powder (2 µm) were wet-ball milled in ethanol for 2 h in a planetary ball-mill. The mixed powder was blended with –30 wt % of potato starch powder in an agate mortar with ethanol. Green samples with no binder were sintered at 1300–1500°C for 2 h in air. The sample contained finer closed pores (<1 µm) as well as the larger pores (–80 µm). The finer microstructure formation can be explained by (1) the local heating effect via the combustion of potato starch, and (2) water vapor-assisted effect.

抄録全体を表示

Baeospora occidentalis is described as a new species associated with melting snow in montane coniferous forests of the western USA. The species is springfruiting and is characterized by a long tapering pseudorhiza covered with white basal rhizomorphs which extends deeply into the needle litter or woody debris. It possesses a multiallelic, tetrapolar mating system. Monokaryotic mycelia produce arthroconidia.

抄録全体を表示

An empirical equation in use for estimating the pseudo-elastic shear modulus, G_f, of subsoil, associated with shear strains less than .001% is proposed in this paper. In a series of in-situ seismic cone tests performed nationwide, the profiles of both G_f and the in-situ void ratio, , with depth were successfully characterised at five sites, each comprising a soft clay layer deposited in the Holocene era. The database which comprised the original data from the field and laboratory tests, coupled with similar information on well-documented Holocene clay deposits in Europe, was statistically analyzed in attempts to determine a generalised relationship with which G_f of soft clay may be reasonably estimated only from routinely available borehole data; that is and the current geostatic effective overburden pressure, σ'_v. An empirical relationship, G_f=, 000 -√(σ'_v) (kPa), was derived from the statistical analysis applied to data from seven different clays worldwide, for which extended over a range between 1 and , and the overconsolidation ratio ranged roughly between 1 and 2. The applicability of the proposed relationship was evaluated for two case records, each in which the clay exhibited unusual behavior; i.., the undrained shear strength remained more or less constant with depth due to the existence of artesian pressure at one site, and, at the other, G_f decreased, whereas increased, with depth. It was demonstrated that even in these clay deposits exhibiting exceptional profiles, the proposed relationship was capable of predicting G_f with a reasonable accuracy by determining the profiles of and σ'_v with depth. In addition, the prediction when compared to G_max from carefully performed laboratory cyclic tests, yielded a better estimate of G_f from the in-situ seismic survey. Despite the fact that the empirical relationship was initially designated to estimate G_f of soft clays, it may be equally applicable to sandy deposits. This was verified by comparing it to similar, and well-established, relationships developed for sands. A case record as such is also described for a loose sand deposit at Higashi-Ohgishima in Tokyo Bay which was placed in 1960's by land reclamation.

抄録全体を表示

Alfven resonance effects on the evolution of a magnetic island driven by an externally applied perturbation are investigated for rotating plasmas. The simulation results show the importance of Alfven resonance for obtaining a perturbed current profile and estimating a critical value of the external perturbation, beyond which the magnetic island grows rapidly. The nonlinear evolution of the externally driven magnetic island is also investigated at low and high viscosities ν. It is shown that the transition phase accompanying the secondary reconnection at the initial X-point in the driven magnetic island evolution occurs in low resistivity and viscosity plasmas.

抄録全体を表示

(, )

0.09O₃

thin films were formed on Pt(111)/Ti/SiO₂/Si(100) substrates by pulsed laser deposition using fourth-harmonic-generated light (λ=266nm) of a

Nd³

+: YAG laser beam. Crystallinity and stoichiometry of the thin films were determined by X-ray diffraction, X-ray fluorescence analysis and electron probe microanalysis. Their ferroelectric properties were investigated from electrical measurements. The leakage current density increased from 10^-11 to 10-

3

A·cm^-2 with increasing electric field up to 200kV·cm^-1. The dielectric constant, remanent polarization and coercive field of the

BaTi_0.91

(

Hf_0.5

,

Zr_0.5

)

0.09O₃

thin films were estimated to be 120 at 1kHz,

8.7μC·cm

-2 and 127kV·cm^-1, respectively.

抄録全体を表示

【目的】LASIK後眼に対しTotal Keratometry（TK）を用いたLASIK用IOL度数計算式と従来式による予測屈折誤差を比較し、TKの有用性を評価する。

【対象及び方法】近視LASIK術後で白内障手術を施行した18例27眼（平均年齢60.4±

.歳）を対象とした。眼軸長、角膜屈折力（K値）、TK値の平均±標準偏差（SD）は、26.±1.mm、39.±1.、39.2±2.であった。比較式はBarrett TK True-K（-TK）式、EVO TK（-TK）式、Haigis TK（H-TK）式とBarrett True-K（）式、EVO（）式、Haigis-L（H）式、Shammas-PL（S）式、Camellin-Calossi（C）式とした。予測屈折誤差の絶対値平均±SDと±.以内の割合を比較した。

【結果】絶対値平均±SDと±

.以内の割合は-TK式：.18±.16（96％）、-TK式：.20±.16（93％）、H-TK式：.46±.39（52％）、式：.18±.35（85％）、式（％）：.21±.32、H式：.35±.25（78％）、S式：.29±.27（78％）、C式：.37±.33（56％）であった。

【結論】TK値を用いた

-TK式と-TK式はその他の式と比較して予測屈折誤差が同等又は小さく有用である。

抄録全体を表示

2-Benzyl-4-chloro--mercapto- (2H)-pyridazinone (1) was heated in ethanol under reflux for 10 hours to form concurrently 2, -dibenzyldipyridazo [4, - : 4', '-]-1, 4-dithiin-1, 6 (2H, H)-dione (Ia) (57% in yield) and 2, -dibenzyldipyridazo [4, - : 4', '-]-1, 4-dithiin-1, (2H, H)-dione (IIa) (14% in yield). Assignment of the two products to the corresponding structures is established by their physico-chemical constants and chemical behaviors. The concurrent formation of the dipyridazo [4, - : 4', '-]-1, 4-dithiin-1, 6 (2H, H)-dione and the -1, (2H, H)-dione were observed in, not only heating 4-chloro--mercapto- (2H)-pyridazinones (1-) in polar solvent, but warming 4-mercapto--chloro- (2H)-pyridazinones (4-6) in the presence of potassium carbonate in DMF. For the interpretation of the reaction, keto-thioketo carbenes as active intermediate species and a reversible interconversion among them are suggested on the basis of the fact that there was nonexistence of an equilibrium between the two compounds, such as Ia and IIa, under the reaction condition and a trapping keto-thioketo carbene species as 2-phenylimino--benzylpyridazo [4, -]-1, -dithiol-4 (H)-one (IVa) (14% in yield) along with the major products, (Ia) and (IIa), was furnished by warming 1 with phenylisothiocyanate in the presence of triethylamine in dry benzene. On the contrary, participation of a reversible interconversion between Ia and IIa, to a considerable extent, with the concurrent formation of them in the case of benzylation of either Ib or IIb, by warming with benzylchloride in the presence of potassium carbonate in DMF at 80°, might not be neglected, because an attempted approach to an equilibrium between Ia and IIa in a similar reaction condition except the use of benzylchloride realized, whereas non-existence of an equilibrium between Ib and IIb in the similar reaction condition was observed.

抄録全体を表示