The advantages and disadvantages of using a back analysis of slope failures to evaluate soil shear strength are discussed. A methodology is presented herein that allows the implied level of reliability associated with soil shear strength parameters back calculated from slope failures to be estimated. A reliability approach is also used to estimate the probability of failure for a given limit equilibrium slope stability method, design factor of safety, and combination of back calculated Mohr-Coulomb shear strength parameters, ' and φ'. The methodology is illustrated using 39 landslides in the Orinda Formation in the San Francisco Bay area. The impact of additional case histories in the same geologic setting, i.., a larger data set, on the required design factor of safety for a given probability of failure is also investigated.

抄録全体を表示

Two new partially saturated tricyclic ring systems, , a, , , , 10, 10a, 11-octahydro-11-oxodibenz [, ] oxepins (a and ), and -thiepins (4a and 4) were synthesized. Compounds 4a and 4 were desulfurized to give a pair of isomeric 2-methylbenzoylcyclohexanes (10a and 10). Deuterated 4a and 4 (11a and 11) were prepared starting from butadiene- (12). The stereochemical features of a (trans), (cis), 4a (trans) and 4 (cis) are compared with those of 10a, 10, 11a and 11 on the basis of proton nuclear magnetic resonance data.

抄録全体を表示

This paper outlines a mathematical description of the stress dilatancy behaviour of granular materials which accounts for stress level and void ratio dependencies. The consideration of these aspects has important implications in the modelling of granular material behaviour. In fact, granular material mechanical response is largely dominated by the evolution of dilatancy, fabric and void ratio histories. The starting point in this study is the well established Rowe's theory which is revisited and ultimately modified by introducing a factor linked to governing state parameters in order to describe the complete behaviour of granular materials during deformation. Numerical simulations of triaxial tests on granular materials at different void ratios and stress levels are herein presented to illustrate the model.

抄録全体を表示

11-Amino-, a, , , , 10, 10a, 11-octahydrodibebenzo[, ]thiepines (a-) and -oxepines (a-) were synthesized by the Leuckart reaction of , a, , , , 10, 10a, 11-octahydro-11-oxodibenzo[, ]thiepines (1a, )and -oxepines (2a, ) followed by hydrolysis of the reaction products 4a- and a-, respectively. The four diastereomers, cis(a-H, 10a-H)-cis(10a-H, 11-H) a and a, cis(a-H, 10a-H)-trans(10a-H, 11-H) and , trans(a-H, 10a-H)-trans(10a-H, 11a-H) and , and trans(a-H, 10a-H)-cis(10a-H, 11-H) and , were isolated and their configurations and conformations were elucidated by chemical methods together with ¹H-nuclear magnetic resonance spectroscopic and X-ray crystallographic analyses.

抄録全体を表示

A new analytical method is proposed for determining the inextensible grid reinforcement pullout resistance and pullout force/pullout displacement curve by using basic backfill soil and grid reinforcement properties. The pullout skin friction resistance/pullout displacement relationship is simulated by linear elastic-perfectly plastic model. A hyperbolic model has been proposed to represent the pullout bearing resistance/pullout displacement relationship in which the maximum bearing resistance of a single bearing member is determined using a new bearing capacity equation proposed in this paper. The influences of the grid bearing member spacing ratio, S/, the bearing member deflection rigidity, and the pullout softening behavior on the mobilization of pullout bearing resistance are explicitly included in the proposed model. Good agreement has been obtained between calculated values and laboratory test results.

抄録全体を表示

Natural sedimentary clays exhibit ageing effects on their behaviour when subjected to both consolidation and shearing. Attempts to characterising the in-situ 'structure'of soft marine clays have been made in case studies performed in Ariake (Japan) and in Bangkok (Thailand), each showing a typical profile of aged clay-structure with depth reflecting its site-specific geological consolidation history. In each site, profiles of Atterberg limits, natural water content, overconsolidation ratio (OCR), quasi-elastic shear modulus G_max and the undrained shear strength c_u with depth were attained from various laboratory tests, together with the a comparable profile of quasi-elastic shear modulus from insitu seismic survey G_f. Quantitative assessment of the aged clay-structure was made by using two different measures, metastability index MI (G) and the soil constant reflecting structure S (Jamiolkowski et al., 1994). The profiles of MI (G) and the S-value with depth were both determined based on the corresponding G_max behaviour of the reconstituted sample. "Disturbance"of laboratory samples retrieved by using two different samplers (i.., Laval and Japanese thin-walled samplers) with two different sampling techniques (i.., pre-boring and displacement methods) was discussed. A new approach to estimate c_u"in the ground", termed by the authors the MILK (Metastability Index coupled with Laboratory K_o test) method, is proposed. A trial of the MILK-method is demonstrated in soft Bangkok clay, the texture of which is similar to "soft cheese".

抄録全体を表示

カンキツ主要12種を用いて染色体のクロモマイシン (CMA) 染色を行った．染色体は CMA(+) バンドの有無および位置から 種類に区分できた．すなわち，CMA(+) を A: 両端および動原体近傍に有する，: 一方の端部と動原体近傍に有する，: 両端に有する，: 一方の端部に有する，: CMA(+) がない，: 動原体近傍に有する，Dst: 付随染色体を有する 型，である．各種はこれらのうち 2～ 種類の染色体を有し，独自の CMA バンドパターンを示した．

C

. medica では 2 + + ，

C

. limon では 1 + 1 + + ，

C

. aurantifolia では 2 + + ，

C

. aurantium では 1A + 1 + 1 + + ，

C

. sinensis では 2+ 2 + + ，

C

. maxima では A + + 4 + ，

C

. paradisi では 2A + + + ，

C

. ichangensis では 2 + 2 + 12 + 2，

C

. latipes では 2A + + + ，

C

. micrantha では 1 + 11 + 4 + 2Dst，

C

. macroptera では 2 + 1 + 11 + + 1，

C

. hystrix では + 1 + + + 2 + 1Dst であった．

抄録全体を表示

The Beckmann rearrangement of aliphatic ketone oximes, R(CHs)=NOH (R=Et (1); n-Pr (2); iso-Pr (); iso-Bu (4)), with polyphosphoric acid (PPA), polyphosphate ester (PPE), and ester of phosphoric acid (2 P- R) was carried out and migratory ratios ((a)/() in eq. (1)) were determined, The results are shown in Fig.1, 2, and , respectively.
In Fig.1 and 2, the migratory ratios decrease with reaction time and nearly approach to the ratios of anti-alkyl form/syn-alkylform in benzene(A1) or DMSO(A2)except for () (See Table 1). From this fact, it has been found that PPA and PPE are inactive for isomerization of the oximes andanti-alkyl oximes rearrange faster than syn-alkyl ones. ln the case of (), migratery ratios are smaller than Ai or A2. As acetonitrile is detected by GLC, it is presumed that fission has been occurred simultaneously with rearrangement in anti-alkyl oxime (eq. ()). In the case of 2 P- R, all modes of the reaction arethe same as in above, except that the rate of fission is tnuch faster than that in PPA and PPE.
The reaction of anti-alkyl ketone oximes having a bulky grouphas been greatly influenced by the use of sterically demanding catalysts such asPPA, PPE, and 2 P- R.

抄録全体を表示

The present paper aims at developing a simplified model for a stress-strain relationship at small strains up to an initial yielding of homogeneous saturated frozen sand. The modelling of elastic moduli for an ice-sand mixture as a composite geomaterial is first introduced based on previous studies, where a saturated frozen sand is treated as the icesand mixture. The applicability of modelling the elastic moduli under constant temperature is then discussed from the theoretical and experimental points of view. In addition, the hyperbolic stress-strain modelling of saturated frozen sand at small strain is presented. The effect of the volume fraction of sand, stiffness of sand inclusion and temperature changes on the elastic moduli and the stress-strain behaviour up to about 1-2% axial strain, which is defined as an upper yield stress, are investigated through the model, whose applicability is verified in comparison with the experimental data.

抄録全体を表示

A method for analyzing the uncertainties involving the use of empirical relationships in design is developed. It is applied to evaluate the reliability of the relationship s_u(mobilized)=(measured), whereby the pertinent uncertainties are analyzed using extensive laboratory and field observed data. On the average, the relationship s_u(mobilized)= (measured) is unbiased and the error implicit in the relationship is about 15%. When cone values are used to infer s'_p, additional uncertainties on the mobilized undrained strength will incur resulting mainly from the calibration uncertainty between σ'_p and the cone values. Alternatively, vane tests may be performed to infer the mobilized strength using Bjerrum correction factor. Results show that uncertainty level associated with using the vane tests is smaller than that using the cone values, provided that similar scatter is observed between measured vane and cone values at a given site. However, prediction of the mobilized strength is even more accurate if direct measurements can be made on the preconsolidation pressure. The proposed probabilistic method also assesses the benefit of additional tests besides comparing the accuracy of using various soil parameters for predicting mobilized undrained strength. Such information is essential for planning cost-effective site characterization program.

抄録全体を表示

Thirty-six patients (19 males, 17 females: atypical schizophrenia; , typical schizophrenia; , depression; 11, neurosis and other psychiatric disorders; ) were operated on according to orbitoventromedial undercutting by Hirose. In all cases, the Rorschach test was carried out and daily behaviors were studied. Thirty-one scales of the test were subjected to multivariate analysis whereas the behaviors were evaluated according to the following criteria, i.., A: recovered or symptom free, : markedly improved, : moderately improved, : slightly improved and : not improved. The following results were obtained.
1) The evaluation of behaviors is as follows. A: 12 cases, : , : , : , : none.
2) It was found that scores of +106% and R+106% scales were significantly higher after the operation than before; that correlation coefficients between the scores before and after the operation were considerably high.
) Factor analysis followed by varimax rotation was carried out. Six factors were extracted, i.., (1) sensitivity to emotional stimuli, (2) ego-strength, () obsessional rigidity, (4) reaction time, () anxiety and tension and () empathy. It was revealed that 2 was high in atypical schizophrenia, depression and neurosis, and that 2 and were significantly different in terms of the factor scores among the four groups A, , and ; 2 was highest in A, and lowest in regardless of whether it was before or after the operation. showed high scores in both A and , and low in .
4) Multiple discriminant analysis was applied to the data of the Rorschach test before the operation, by classifying 36 subjects into the four groups A, , and . As a result, high rates of correct diagnosis were obtained, i.., 100% for A, 78% for , 56% for and 100% for . When the groups and were combined into one group (+) the highest percentage (100%) was seen in A, followed by (89%) and + group (87%). When the groups A and were combined into one group (A+), the percentages of correct diagnosis were 81% for A+, and 93% for +.
In conclusion, it can be said that scales of the Rorschach test have been proved to be valid for predicting mental and physical states after the orbito-ventromedial undercutting.

抄録全体を表示

The main objective of this paper is to compare safety factors obtained from Morgenstern-Price, Janbu and Spencer methods with the factors calculated from the modified variational approach (Leshchinsky and Huang, 1992a). Such comparison is essential since there is no mathematical proof that the variational analysis indeed yields a minimum and thus, physically produce significant results. The safety factors compared well, indicating the variational analysis is on a par with acceptable existing rigorous methods. Availability of a user-friendly computer code may make the variational analysis useful to practicing engineers. However, its greatest potential at the moment is in - applications; i.., unlike other methods, its extension to - is straightforward.

抄録全体を表示

A procedure for limit equilibrium slope analysis based on a realistic consideration of the mobilized interslice shear forces is presented in this paper. This new approach ensures that solutions are kinematically admissible and the possibility of convergence problems, often associated with numerical solutions, is minimized. The proposed approach recognizes the importance of slip surface geometry in estimating interslice shear forces whether vertical or non-vertical slices are used in a limit equilibrium analysis. Illustrative examples are presented and the results shown to be reasonable. The calculated factors of safety based on the new method compare very well with values based on recognized methods of analysis. Yet the method is more direct and enables a proper visualization of the transfer of mobilized normal and shear forces through a sloping soil mass above a potential slip surface. The method also gives consistent results with non-vertical slices even if the shape of non-vertical slices is varied.

抄録全体を表示