The ability of Climacodon septentrionalis to immobilize and kill a mycophagous nematode (Aphelenchoides sp.) in vitro is described for the first time. Two isolates produced droplets (20–45 μm in diameter) that formed at the apices of tall, stalked, and branching secretory cells (700–1,500 μm tall). On 2% modified malt extract agar, nematodes became enveloped in the droplets, which restricted their ability to move and resulted in complete immobilization and death within several hours of contact. The rate of decomposition of the nematodes varied considerably, with most individuals persisting for weeks whereas others were degraded within several days and appeared to be colonized by dense hyphal growth. This study provides the first documentation of a non-agaricoid fungus producing secretory cells that are able to immobilize nematodes.

抄録全体を表示

The mechanism of wave-induced instability in a permeable seabed have been studied for more than two decades. The distinction between shear failure and liquefaction, however, has not been clearly defined. This paper presents a fundamental study on the differences in two failure modes for a fully saturated seabed of both finite and infinite thickness. The wave-induced effective stresses and pore pressure, obtained from an analytical solution of Biot's pore-elastic consolidation theory, were employed to examine the failure modes under a two-dimensional plane strain condition. A case study is presented to examine the failure modes with respect to several parameters, such as excess pore pressure, seepage flow, seepage force, failure areas and stress path in the seabed. The conclusions obtained from this study were as follows ; (1) the thickness of a permeable seabed affects the pore pressure and effective stress response to ocean waves and the failure mode of the seabed, (2) either a liquefaction or shear failure, or both, occur in the seabed, even in the saturated seabed, (3) the Mohr-Coulomb's failure criterion, when combined with elastic stresses, can not be employed to estimate the liquefaction failure in the seabed, (4) the liquefaction can be evaluated by a criterion in terms of the excess pore pressure, () The liquefied zone in the seabed is significantly different from the shear failure zone. The shape beneath the seabed surface for the former is almost identical to the contour where the upward seepage flow is concentrated.

抄録全体を表示

One method currently being considered for the disposal of high level radio-active waste is burial in the seabed. When a hot object is buried in soil, the temperature of the soil adjacent to the object is raised and there is transient heat flow away from the object. The rise in the temperature of the soil causes excess pore pressures to be generated and transient pore water diffusion also takes place. A finite element formulation of the coupled heat flow and consolidation problem is presented. The computer implementation of this formulation is found to compare favourably with analytical solutions based on the same physical principles.

抄録全体を表示

In the 1993 Kushiro-oki Earthquake of Richter magnitude ., simultaneous recording of earthquake motions was successfully made at the ground surface and at a depth of 77 meters in a dense saturated sand deposit. The peak horizontal acceleration was 0.47 g on the ground surface and 0.21 g at a depth of 77 meters. The acceleration record at the ground surface showed a distinctive ground response, which consisted of a cyclic motion having a period of about 1. seconds overlain by a spike at each peak of the motion. In order to study the mechanism of this peculiar ground response, effective stress analysis was conducted on the dense saturated sand deposit. The model used for this study was a strain space multiple mechanism model, which takes into account the effect of principal stress axis rotation. The recorded earthquake motion at a depth of 77 meters was used as the input earthquake motion for the analysis. Sampling after in-situ freezing was done in order to evaluate the properties of the sand. The results of the analysis indicated that the observed ground response was due to the effect of dilatancy of sand, which plays a significant role in the response of the dense saturated sand deposits during strong earthquake motions.

抄録全体を表示

Two new partially saturated tricyclic ring systems, 6, 6a, , , , 10, 10a, 11-octahydro-11-oxodibenz [, ] oxepins (3a and 3), and -thiepins (4a and 4) were synthesized. Compounds 4a and 4 were desulfurized to give a pair of isomeric 2-methylbenzoylcyclohexanes (10a and 10). Deuterated 4a and 4 (11a and 11) were prepared starting from butadiene-d₆ (12). The stereochemical features of 3a (trans), 3 (cis), 4a (trans) and 4 (cis) are compared with those of 10a, 10, 11a and 11 on the basis of proton nuclear magnetic resonance data.

抄録全体を表示

The possibility of attenuation of microseismic waves due to the presence of an upward folding of the ocean bottom into the liquid is discussed in this paper. The upward folding of the ocean bottom has been idealized by means of an irregularity in the form of a rectangle intruding into the liquid and the evaluation of the displacement component at any point of the solid medium has been carried out in two stages. First, the change in the incident mode of the surface wave due to the presence of the rectangular irregularity has been determined, and second, the subsequent change of the resulting displacement components due to the termination of the liquid layer and the step change in elevation of the solid medium at the continental margin has been discovered. Finally, numerical calculation has been made to determine the attenuation of the microseismic waves of different periods due to the presence of the rectangular irregularity at the ocean bottom.

抄録全体を表示

In this paper, centrifuge shaking table tests were conducted in order to understand the performance of seawalls during a seismic event. The model tests showed that the displacement of the caisson was much affected by the seaward shear deformation of the sand seabed beneath it during shaking. It was also confirmed that an armored embankment played an important role in the displacement of the caisson during shaking. Based on these test results, a two-dimensional DEM-FEM coupled analysis method was newly developed to numerically predict the deformation of seawalls covered with armored embankments during earthquakes. The movements of the armor units were calculated by DE analysis and deformations of the caisson, rubble mound, sand seabed and backfill were calculated by FE analysis considering the non-linearity of the soil materials based on the effective stress. Dynamic interaction was taken into account by delivering the nodal displacements of the finite elements or the nodal forces converted from the contact forces through the imaginary distinct elements defined at the boundaries between the DE and FE domain. The applicability of this method to the prediction of the deformation of seawalls was verified through numerical simulations of the centrifuge model test.

抄録全体を表示

Seismic records obtained from a seismometer array located in downtown Tokyo Japan for about ten years were inversely analyzed to estimate the dynamic soil parameters. Due to the illposed nature of the problem, the simple and often used "least square method" does not properly estimate the parameters. The Extended Bayesian Method combined with the Akaike Bayesian Information Criterion was introduced to overcome this difficulty. The results obtained were compared with dynamic triaxial test results obtained at the time of the seismometer installation. The shear moduli agree quite well with the estimated results, however the damping ratios estimated are slightly higher than the ones obtained in the laboratory.

抄録全体を表示

This paper concerns the stability against overturning of the caissons on rubble mound subjected to wave loading. A theoretical discussion is first made of the stability of a leaning caisson during wave loading, as a single degree-of-freedom system. The expression for the lower bound of driving moments sufficient to overturn a given caisson is derived. A review is then made of the damages induced to a composite breakwater, which consisted of two adjoining Stretches and C with slightly different sizes of caissons. Attention is called for the observation that most of the caissons in Stretch were overturned, whereas no caissons in Stretch C were brought into overturning. This fact is examined in detail in the light of the theory of overturning, making it possible to estimate the destructive wave heights that are compatible with the observed patterns of damage in Stretches and C of the composite breakwater.

抄録全体を表示

Stress wave theory is applied to open-ended pipe piles to clarify the effects of soil plug on the behaviour of piles during driving and static loading. Measured field data and various numerical models are reviewed ; methods are presented to calculate wave propagation in both the pile and the soil plug ; modelling is presented which takes into account the interaction between the soil plug and the pile ; also presented is simplified method to estimate the loadsettlement relation of the pipe pile in static loading. By correlating observed and calculated values in two analytical cases, the authors demonstrate that incorporation of the soil plug (modelled as a series of masses and springs) is required to correctly predict pile behaviour during driving and static loading.

抄録全体を表示

The behavior of the soft clay grounds subjected to repeated loading is different from that subjected to sustained loading. The difference in settlement between these two loading patterns should be due to secondary compression over a long period of time. Consequently, soft clay grounds subjected to repeated loading tend to be more compressible than those subjected to sustained loading. Therefore, it is necessary for engineers to predict post-construction settlements under repeated loading. In this respect, the preloading is considered to be promising as a countermeasure to reduce the settlement of clay under repeated loading as well as under sustained loading. The effect of preloading on post-construction consolidation settlement of soft clay subjected to repeated loading after removal of a part of preload is investigated in the present paper. It has become clear that the settlement of a clay sample after preconsolidation is mainly affected by the amount of preload, the degree of consolidation due to the preload, the amount of permanent load and the amount of repeated load after removal of preload. The calculated settlement versus time relations using a method to estimate the amount of consolidation settlement of soft clay grounds subjected to repeated loading after removal of preloading were compared with the observed degree of consolidation as parameters of the intensities of preload and repeated load.

抄録全体を表示

Based on the methods previously presented by the authors (Yasuhara et al., 1992, 1994, 1996) for predicting the degradation in strength and stiffness of soft clays in the course of cyclic loading, a methodology has been developed to estimate the cyclic loading-induced settlements. The method also includes not only immediate settlements but also post-cyclic long-term settlements due to dissipation of cyclically induced excess pore pressures in soft soils. The simplified formulae included in the proposed methodology are given as functions of the amplitude of cyclic-induced excess pore pressure normalized by the confining pressure, u/p'_c, plasticity index I_p and factor of safety against bearing capacity failure, F_s. The calculations of cyclic-induced settlements were conducted for soft soil deposits with different index and geotechnical properties. The results calculated using the proposed methodology are presented in the form of a design chart to give the settlement versus normalized excess pore pressure ratio relations including the effects of the plasticity index and safety factor for bearing capacity. An example of the calculated results using the proposed procedure for the earthquake-induced settlements of embankments founded on soft clay, is presented to demonstrate the practicality of the method for design at fields.

抄録全体を表示

Shaking table tests were performed to clarify the settlement in liquefied loose sand of a new foundation incorporating top-shaped concrete blocks. In the tests, blocks of half scale were installed as they are in practice, by using a crusher-run, a lattice of iron rods and iron bars. Shaking table tests were also conducted on foundations with two differently shaped concrete blocks to investigate the effectiveness of the three foundations in reducing settlement. One was a T-shaped concrete block, or a disk-shaped concrete plate with a leg. The other was a conical concrete block without a leg. The results of shaking table tests showed that the foundation with the top-shaped concrete blocks was most effective in reducing the settlement among the three types of foundation. FEM elastic analyses were performed to compute the stress distributions in the models and in-situ ground when the top-shaped concrete blocks were applied and to confirm whether liquefaction resistance of the sand layer below the foundation is large. Moreover, the factor of safety against liquefaction, F_L was evaluated in in-situ model ground, in order to compare with sensitivities against liquefaction in the ground without countermeasures and with top-shaped concrete blocks. For the liquefaction analyses, shear stress in the ground during an earthquake was estimated by dynamic analyses using the SHAKE computer program.

抄録全体を表示

The original Drnevich Resonant Column apparatus has been designed for testing cylindrical soil specimen with maximum longitudinal and torsional stiffnesses corresponding to approximate resonant frequencies 285 Hz and 318 Hz respectively. This apparatus has been modified successfully and its stiffness has been increased to over threefold in the longitudinal vibratory mode and at least twofold in the torsional vibratory mode. Monterey No. O sand samples prepared at approximate relative densities 43% and 60% were tested with the original and the modified apparatus in the range of effective confining pressures from 49 kPa to 588 kPa. Measurement of dynamic moduli values measured with the original apparatus were up to 23% higher, and damping values up to five times higher than those measured by the modified apparatus.

抄録全体を表示

11-Amino-6, 6a, , , , 10, 10a, 11-octahydrodibebenzo[, ]thiepines (6a-d) and -oxepines (a-d) were synthesized by the Leuckart reaction of 6, 6a, , , , 10, 10a, 11-octahydro-11-oxodibenzo[, ]thiepines (1a, )and -oxepines (2a, ) followed by hydrolysis of the reaction products 4a-d and a-d, respectively. The four diastereomers, cis(6a-H, 10a-H)-cis(10a-H, 11-H) 6a and a, cis(6a-H, 10a-H)-trans(10a-H, 11-H) 6 and , trans(6a-H, 10a-H)-trans(10a-H, 11a-H)6c and c, and trans(6a-H, 10a-H)-cis(10a-H, 11-H) 6d and d, were isolated and their configurations and conformations were elucidated by chemical methods together with ¹H-nuclear magnetic resonance spectroscopic and X-ray crystallographic analyses.

抄録全体を表示

Using two direct introduction methods, DNA synthesis or cell proliferation activities of three purified proteins from . coli, namely, human papillomavirus (HPV) proteins of type 16, a mutant type 16 (24 C-G) (transformation defective) and type 6, were measured in mouse fibroblast, C127 cells. By a microinjection method, the order of the cell mitotic indexes for the three proteins as determined by -bromo-2'-deoxy-uridine (BrdU) staining was type 16, 6 and 16 (24 C-G). By the osmotic shock method, the ³H-TdR incorporation and coloration by (3-carboxymethoxy phenyl)-2-(4-sulfophenyl)-2H-tetolazorium (MTS) for the three proteins correlated with the pRb binding and focus forming activities previously reported (hunger et al. 1991). These results indicate that the simple osmotic shock method for direct protein introduction may be generally useful for transformation assays of oncoproteins.

抄録全体を表示