[1] The purpose of this reserch is to make clear what type of design can give good effects to win the high readership score. At the begining I had to know what factors decide the readership score, and how to change the quality of the desing into numerical value. I have used the method of multi-dimentional analysis with the help of a computer, and got the estimation formula, with kinds of factors, as follows ; A^^〜=+C+D+K++bF+cG. A^^〜=estimated values of the readership score. 1) , C, D, K : these four factors are given as category values (so we call them); each factor is classified into several categories. =week day, classified into categories. C=pages of a newspaper, which are characterized by the kinds of articles, news, and the other reading matters, classified into categories. D=kinds of goods and trades of the advertizement, classified into 14 catedories. K=constants, given to each 13 surveys. 2) , F, G : these factors are given as numerical values. G=area of advertizement, measured by the unit of column in the whole page length, being classified into 6 kinds of area (2., 3., , , 10, 15) and 15 column means a whole page, about 2,000cm^2. , F are the marks obtained in the design of advertizements. =sum of the marks obtained in each design element on the advertizement. F=the marks obtained on the whole effect of the design. 3) a, , c : coefficients Using the above formula with the category values and the coefficients, we can obtain the naked design effect from the actual value A of readership score: +bF=A-(+C+D+K+cG). In this research, I used 1,829 data of readership score from 1960 to 1968, being obtained by 13 survevs, spring and autumn twice a year. The sample of size each survey was 3,541, 2,251, or 200 in the other 11 surveys. Multiple correlation coefficient between the estimated value A^^〜 and the actual value A is .951. The table 2^* shows the contribution indexes of each factor by 3 kinds of expression-(1) Range : the absolute difference between the maximum and the minimum category values, (2) Standard deviations of the category values, (3) Partial correlation coefficient : the relationship between the actual values A and each factors. *see the table 2 in the thesis in Japanese. [2] The important point was in the determination of the values of , F. is the sum of the marks obtained in each design element, classified into four kinds : =_1+_2+_3+_. design elements [table] _1, _2, _3, _, these values have the grades, as , 1, 2, 3, and is given to the design that has no attractive effect or no applicable element. And obtain the marks of to grades as the sum of them. The values of F have also grades, to . The principles to determine the values of , F are as follows : a) The marks obtained of , F must be the relative values among the each survey, and at the same time, they must have constancy within the same survey-the same elements of design must win the same marks obtained. ) They must be determined as to win the highest multiple correlation coefficient, when they are put into the estimation formula. c) They must be reasonable. In order to justify them, we must carry many researches on the actual condition. The frequency of accurence of each grade of , F values, as the table -, and - in the thesis in Japanese.

抄録全体を表示

Circuit techniques to enhance the linearity of input-voltage-to-current (V/I) conversion and to increase the output impedance of a current source by compensating for the low intrinsic gain of a transistor were introduced to realize a high-frequency operational transconductance amplifier (OTA) for a low supply voltage using sub-100-nm CMOS processes. Applying these techniques, a MOS th-order Gm-C linear-phase low-pass filter (LPF) was realized using a 65nm CMOS process. A simplified biquad LPF that can serve as a component of a th-order LPF was newly developed by replacing OTAs with resistors. As a result, the -3dB frequency bandwidth, group delay ripple, 3rd-order distortion, and 3rd-order input intercept point (IIP3) were 200MHz, 2.2%, ≤ -55dB with a 100MHz input, and +10.3dBm, respectively, all with a ±.1Vp-p input signal at each input terminal in the pseudodifferential configuration. The LPF including an output buffer dissipated 60mW in the case of a 1.2V supply. Wide spurious-free dynamic range (SFDR) characteristics were confirmed up to high frequencies.

抄録全体を表示

The possibility of attenuation of microseismic waves due to the presence of an upward folding of the ocean bottom into the liquid is discussed in this paper. The upward folding of the ocean bottom has been idealized by means of an irregularity in the form of a rectangle intruding into the liquid and the evaluation of the displacement component at any point of the solid medium has been carried out in two stages. First, the change in the incident mode of the surface wave due to the presence of the rectangular irregularity has been determined, and second, the subsequent change of the resulting displacement components due to the termination of the liquid layer and the step change in elevation of the solid medium at the continental margin has been discovered. Finally, numerical calculation has been made to determine the attenuation of the microseismic waves of different periods due to the presence of the rectangular irregularity at the ocean bottom.

抄録全体を表示

Yttrium samples were levitated in an electrostatic levitator and their radiation intensities at their melting temperature were measured by spectrometers over a wide wavelength range. By comparing the measured intensities with those of a blackbody, spectral hemispherical emissivity values were calculated. The total hemispherical emissivity of yttrium at its melting temperature was calculated by integrating the spectral hemispherical emissivity and was found to be .32. The constant pressure heat capacity was also calculated using time-temperature data and was found to be 37. J·mol-1·K-1 at 1795 K.

抄録全体を表示

The ability of Climacodon septentrionalis to immobilize and kill a mycophagous nematode (Aphelenchoides sp.) in vitro is described for the first time. Two isolates produced droplets (20–45 μm in diameter) that formed at the apices of tall, stalked, and branching secretory cells (700–1,500 μm tall). On 2% modified malt extract agar, nematodes became enveloped in the droplets, which restricted their ability to move and resulted in complete immobilization and death within several hours of contact. The rate of decomposition of the nematodes varied considerably, with most individuals persisting for weeks whereas others were degraded within several days and appeared to be colonized by dense hyphal growth. This study provides the first documentation of a non-agaricoid fungus producing secretory cells that are able to immobilize nematodes.

抄録全体を表示

Sea-bottom topography, magnetic and gravity anomaly maps were compiled for two seamounts, Smt-948 (23.°N, 151.°) and Smt-1100 (.°N, 153.°) in the vicinity of Minami-Tori Sima (Marcus) Island based on survey data observed by the S/V Takuyo of the Hydrographic Department of Japan from July to August, 1985. These flat-topped seamounts are located in the Jurassic magnetic quiet zone on crust older than 150Ma. On Smt-1100, sea bottom photographs were taken with a deep-sea camera and three dredge hauls were made. Three-dimensional magnetic analyses of Smt-948 gave a paleomagnetic pole position of 57.°N, 329.° with the goodness-of-fit ratio 2.. The pole position lies in the Pacific apparent polar wander path between the Late Jurassic (150Ma) and the Late Cretaceous (65-Ma). This result implies that Smt-948 was generated in the middle Cretaceous, a significant period after the formation of the Jurassic sea-floor. Two-dimensional modeling of magnetic and gravity anomalies across these seamounts reveal a caldera-like basement structure, suggesting a constructional origin of the flat top of the guyot. A sequence of normal and reversed magnetic polarity layers is estimated from magnetic modeling on Smt-1100.

抄録全体を表示

A kW class Stirling engine generator has been developed with the aim of constructing a system mainly for service use. The Stirling engine is built up as a 2-piston type with driving mechanism. It has a hot cylinder and a heat-exchanger cylinder in which a regenerator and a cooler are installed, and the both cylinders are connected by a heater made by U-shape tubes. The developed Stirling engine generator is unified hermetically because of including a PM synchronous generator in the driving mechanism. From the results of performance test, electric power is 3.92kW and efficiency is 31.% based on thermal heat into the engine. It is effective in environmental preservation and energy saving to apply the developed Stirling engine generator to a power generation and heat supply system with heat source of wastes and wood biomass, since a heater shape is suitable for absorbing heat form combustion gas.

抄録全体を表示

The numerical values of the intervals betrween optieal levels are competed for the configurations *

94s

,

5

s, 6s and

7

s of Cu⁺, according to the general expression of energy-levels derived in the previous paper The self-consistent field radial functions computed by Hartree adn Hartree are used for1s, 2s, 2p, 3s, 3p and 3d. Those of

4

s,

5

s,

e

.s and are ealenlated from Hartree Hartree's core-functions by the numerical integrations. The calculated results are shown in Table I.The agreement with experiment is satisfactory

抄録全体を表示

Nアルキル3,:,10-ペリレンテトラカルボン酸モノアンヒドリド=モノイミド[a～]と芳香族アミン(アニリン,p-トルイジン,p-アニシジン,3,-キシリジン,-アミノナゾベンゼン,およびo-フェニレンジアミン)を縮合して非対称型3,:,10-ペリレンビス(ジカルボキシミド)誘導体-N-アルキル-N'-アリール-3,:,10-ペリレンビス(ジカルボキシミド)(〔a～〕,〔6a～〕,〔a～〕,〔a～〕,〔a～〕,および〔10a～〕)を合成した. これらの各誘導体はすべて赤色系の色相を示し, 顔料試験の結果N-ブチル-N'-アリール-3,:,10-ペリレンビス(ジカルボキシミド)(たとえば〔〕や〔6〕)がとくにすぐれた耐光性を示した.

抄録全体を表示