Fisheries Engineering
Online ISSN : 2189-7131
Print ISSN : 0916-7617
ISSN-L : 0916-7617
Influence of Gear Construction and Surface Conditions on Length of Working Time and Walking Pace of Crew Members on Board a l,000 G.T. Fishery Training Vessel during Tuna Longlining
Hiroshi MAEDAMasato HAMAGUCHIShinya SHIMOKAWASusumu TAKAYANAGIHiroyuki KURODA
Author information
JOURNAL OPEN ACCESS

1998 Volume 35 Issue 2 Pages 101-112

Details
Abstract
The time length of extending and retrieving work of 10 strings of tuna longline settled June, 1997 in the eastem part of the Indian Ocean by a stem ramp trawler type l,000 G.T. fishery training vessel and the walking pace of crew members during these works were recorded. Their relation to the gear construction and the surface conditions was examined, and the following results were obtained : 1) The length of working time depended on the gear construction. 2) It took a longer time to retrieve a deep-lying string, While it required a shorter time when the string was retrieved by the vessel facing a wind from starboard. 3) Equations, which could be regarded to be significant at 0.05 level or yielding the multiple correlation coefficient higher than 0.5 using 1 or 2 explanation variables, could be obtained for the walking pace of more than a half of the members concemed. 4) The significant equations for walking pace during retrieving work adopted the variables of surface conditions as the explanation ones. 5) Suggested influence of the surface conditions from the present results coincided with our experience on board. 6) To reach a clear conclusion, further studies were found to be needed, using the records for more strings, in which the probable explanation variables less frequently showed correlation to one another.
Content from these authors
© 1998 The Japanese Society of Fisheries Engineering
Previous article Next article
feedback
Top