Scale model of a new midwater trawl system for sampling pelagic larval and juvenile fish

Abstract

A new midwater sampling trawl was designed to collect pelagic larval and juvenile fish. It has a rigid square frame of 2.25 m², with a 12.5 m high strength polyethylene net. The cambered V-type depressor with a camber ratio of 15%, aspect ratio of 6.0, and dihedral angle of 20° was hung to the bottom of the frame with four slings based on the principle of the parallelogram. A 1/5 scale model net of the prototype was made to examine the towing performances in a circulating water tank. The depth of the net and the attack angle of the depressor were measured at various flow velocities ranging from 30 to 100 cm/s with warp lengths of 260, 310, 360, 410 cm. The depressor held the setting angle closely, and the fluctuating range of the net depth was only 2% for the longest warp length over a wide range of flow velocities. This sampling trawl could maintain near constant depth under various flow velocities by the results of model experiment.