2010 Volume 130 Issue 6 Pages 972-979
We propose microstrip-line balanced filters with controllable attenuation poles by using tapped resonators. These filters are basically composed of a coupled-line and tapped resonators. The coupled-line provides bandpass responses with attenuation poles and balanced filter operation. Also, the tappd resonators provide bandpass responses and attenuation poles. The position and number of the attenuation pole are controlled by the choice of the kind of the tapped resonator. In this paper, we examine a filter with an unbalanced port and a balanced port as well as a filter with a balanced port and a balanced port. The presented filters are simulated with commercial simulators and are measured with a vector network analyzer. We have confirmed that the bandpass characteristics with controllable attenuation poles and balanced characteristics(amplitude and phase balance performances) are obtained. The measured results of the fabricated filters agree well with the simulated results.