International Journal of Automation Technology
Online ISSN : 1883-8022
Print ISSN : 1881-7629
ISSN-L : 1881-7629
Special Issue on On-Machine and In-Process Measurement for Smart and Precision Manufacturing
Diameter Measurement for Micro-Spheres via Coherent Scanning Interferometry with Reference to Gauge Block
Masaki Michihata Shotaro KadoyaSatoru Takahashi
Author information
JOURNAL OPEN ACCESS

2024 Volume 18 Issue 1 Pages 11-17

Details
Abstract

This paper describes a diameter measurement method for micro-spheres via coherent scanning interferometry (CSI) with a gauge block as the reference. The CSI system measures the height difference between the sphere and gauge block surface from both the front and back sides; then, the diameter is calculated from the measured heights via CSI and the gauge block length. For the glass sphere measured in this study, the diameter was found to be 270.556 µm with an uncertainty of 0.16 µm (k=2). Interestingly, by selecting a gauge block that matches the sphere diameter, the measurement uncertainty remained virtually unchanged, even for different sphere diameters; the proposed method achieved a relative uncertainty of 10-3–10-4. By utilizing the calibrated reference and the highly sensitive CSI system, and based on the comparator principle, the proposed method enables accurate diameter measurement without requiring specific measurement instruments.

Content from these authors

This article cannot obtain the latest cited-by information.

© 2024 Fuji Technology Press Ltd.

This article is licensed under a Creative Commons [Attribution-NoDerivatives 4.0 International] license (https://creativecommons.org/licenses/by-nd/4.0/).
The journal is fully Open Access under Creative Commons licenses and all articles are free to access at IJAT official website.
https://www.fujipress.jp/ijat/au-about/#https://creativecommons.org/licenses/by-nd
Previous article Next article
feedback
Top