International Journal of Electrical Machining
Online ISSN : 2188-5117
Print ISSN : 1341-7908
ISSN-L : 1341-7908
Paper
In-situ visualization of gap phenomena in wire EDM using high-speed, high-energy (100 keV) X-ray imaging
Tsubasa Takahiro, Hiroto Motoyama, Gota Yamaguchi, Satoru Egawa, Jianli Guo, Takuya Hosobata, Hidekazu Mimura
Author information
JOURNAL FREE ACCESS

2026 Volume 31 Pages 1-

Details
Abstract

In electrical discharge machining (EDM), the thermal energy of spark discharges generated between a tool electrode and a workpiece melt and remove the metal material. As the machining progresses, the interaction area between the electrodes and the vibration state of the wire changes drastically. Therefore, in-situ direct observation of the machining point is essential for understanding the underlying mechanisms. However, such observation has been extremely challenging because the discharge occurs within opaque metals and is obscured by intense light emission, debris, bubbles, and dielectric fluid. In this study, a high-speed imaging system using 100-keV high-energy X-rays was employed to overcome these limitations. In-situ observation of wire electrode vibrations in the discharge gap during wire EDM was performed at the hard X-ray beamline BL05XU of SPring-8. Analysis of the captured images synchronized with discharge current data demonstrated that high-speed X-ray imaging provides critical and various insights to understand wire EDM.

Content from these authors
© 2026 by the Japan Society of Electrical Machining Engineers
Next article
feedback
Top