International Journal of Electrical Machining
Online ISSN : 2188-5117
Print ISSN : 1341-7908
ISSN-L : 1341-7908
Paper
Nickel Deposition on Polyvinyl Chloride Resin by Laser-Enhanced Electroless Plating
Tsunehisa Suzuki, Kohei Oide, Tatsuya Fujii, Mitsuyoshi Nomura
Author information
JOURNAL FREE ACCESS

2026 Volume 31 Pages 20-

Details
Abstract

This study investigates direct nickel deposition on general-purpose polyvinyl chloride (PVC) resin without activation using laser-enhanced electroless plating. A 980 nm laser irradiated a PVC substrate in a low-phosphorus Ni-P bath. The effects of laser power density, irradiation time, and agitation were evaluated. Initially, laser irradiation induced local PVC melting, followed by island-like nucleation. Stable continuous film growth was proportional to irradiation time at power densities ≥ 6.0×10² W/cm², whereas substrate deformation was dominant at 4.4×10² W/cm². Agitation significantly promoted deposition by facilitating ion supply and bubble removal. XPS analysis revealed laser-induced dechlorination and oxidation of the PVC surface. This chemical modification, combined with the laser's thermal effect, enabled metallization without catalytic nuclei. The deposited nickel exhibited a hardness of ~798 HV, demonstrating the technique's feasibility for forming metal patterns directly on heat-sensitive resins.

Content from these authors
© 2026 by the Japan Society of Electrical Machining Engineers
Previous article Next article
feedback
Top