ISIJ International
Online ISSN : 1347-5460
Print ISSN : 0915-1559
ISSN-L : 0915-1559
Regular Article
Density and Surface Tension of CaO–SiO2–Al2O3–R2O (R=Li, Na, K) Melts
Sohei SukenagaShinichiro HarukiYoshitaka NomotoNoritaka SaitoKunihiko Nakashima
Author information

2011 Volume 51 Issue 8 Pages 1285-1289


In the present work, we measured the density and the surface tension of CaO–SiO2–Al2O3–R2O (CaO/SiO2=0.67, Al2O3=20 mass%, R2O=10.8 mol%, R=Li, Na, K) quaternary melts at elevated temperature using the double-bob Archimedean method and the ring method, respectively.
The density of the CaO–SiO2–Al2O3–R2O melts decreased with temperature due to the thermal expansion of the melts. In addition, the density of the CaO–SiO2–Al2O3 ternary melt decreased with the addition of the alkali oxides. We converted the density into the molar volume to have a consideration on the microstructure of the melts. The molar volumes of the CaO–SiO2–Al2O3–R2O melts are proportional to cube of the cationic radius for the alkali ions, which indicates the structural roles of the alkali oxides are mainly charge compensator to AlO45– anions.
The surface tension of the CaO–SiO2–Al2O3–R2O melts changed only slightly with temperature. The surface tension of the CaO–SiO2–Al2O3 ternary melt increased with the addition of Li2O. In contrast, the surface tension decreased with the addition of Na2O or K2O. As for quaternary system, the surface tension increased with the ionic potential of the additive alkali ions; it is the same tendency with the binary alkali silicate melts. However, the mechanism of the surface tension change with the addition of the alkali oxides has not been clarified in the present study.

Information related to the author
© 2011 by The Iron and Steel Institute of Japan
Previous article Next article