Effect of Mg and Ca Treatment on Behavior and Particle Size of Inclusions in Bearing Steels

Wenjun Ma; Yanping Bao; Min Wang; Lihua Zhao

doi:10.2355/isijinternational.54.536

Review

Effect of Mg and Ca Treatment on Behavior and Particle Size of Inclusions in Bearing Steels

Wenjun Ma , Yanping Bao, Min Wang, Lihua Zhao

Author information

Wenjun Ma Corresponding author
State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Room 1012, Metallurgical Building of University of Science and Technology in Beijing
School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Room 1012, Metallurgical Building of University of Science and Technology in Beijing
Yanping Bao
State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Room 1012, Metallurgical Building of University of Science and Technology in Beijing
School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Room 1012, Metallurgical Building of University of Science and Technology in Beijing
Min Wang
State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Room 1012, Metallurgical Building of University of Science and Technology in Beijing
School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Room 1012, Metallurgical Building of University of Science and Technology in Beijing
Lihua Zhao
State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Room 1012, Metallurgical Building of University of Science and Technology in Beijing
School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Room 1012, Metallurgical Building of University of Science and Technology in Beijing

Keywords: Mg treatment, minor Ca treatment, bearing steel, non-metallic inclusions, thermodynamic calculation

JOURNAL OPEN ACCESS FULL-TEXT HTML

2014 Volume 54 Issue 3 Pages 536-542

DOI https://doi.org/10.2355/isijinternational.54.536

Details

Abstract

The effect of Mg and Ca treatment on the behavior and the particle size of inclusions in bearing steels were studied by industrial experiments and thermodynamic calculations. The results showed that the excess addition of Mg wires is not conducive to control the total oxygen content in bearing steel because of the secondary oxidation. The irregular and clustered Al₂O₃ inclusions are the dominant in the aluminium killed bearing steels. The different quantity Mg wires were added, which can change the irregular and clustered Al₂O₃ inclusions into the spherical MgO or MgO·Al₂O₃ inclusions. When the Ca addition is insufficient, the Al₂O₃ and MgO·Al₂O₃ inclusions could not completely change into the spherical CaO–MgO–Al₂O₃ system inclusions. By the three-dimensional morphologies analyze, Al₂O₃ inclusions are easy to gather and the size of clustered Al₂O₃ inclusions is large. By the Mg or Ca treatment, the size of Al₂O₃ inclusions can be reduced, but the large size CaO inclusions are brought into steel after the Ca treatment.

Corresponding author

Register with J-STAGE for free!