Influencing Factors and Effects of Assimilation Characteristic of Iron Ores in Sintering Process

Abstract

Iron ore’s assimilation characteristic reflecting the beginning formation temperature of liquid phase in sintering process plays very important role on the fluidity of liquid phase and bonding strength of sinter body. Experimental study of assimilation characteristics of 12 kinds of iron ores were conducted using micro-sinter equipment, and pure reagent simulating tests of assimilation characteristic were also carried out for the purpose of achieving the influence of chemical composition on the assimilation characteristic. In addition, effects of assimilation characteristic of iron ore on the fluidity and bonding capacity of bonding phase were also researched. This study showed that SiO₂ and LOI promoted the assimilation of iron ore, low Al₂O₃ (<1.5 mass%) was good to the assimilation, but high Al₂O₃ (≥1.5 mass%) was bad, MgO was adverse to assimilation of magnetite concentrate. In addition, lower assimilation temperature of iron ore led to higher superheat degree of liquid phase at a certain sintering temperature, then higher liquid fluidity and bonding strength.