ISIJ International
Online ISSN : 1347-5460
Print ISSN : 0915-1559
ISSN-L : 0915-1559
Steelmaking
Optimization of the Mixing Time Using Asymmetrical Arrays in Both Gas Flow and Injection Positions in a Dual-plug Ladle
José de Jesús Villela-AguilarJosé Ángel Ramos-BanderasConstantin Alberto Hernández-BocanegraAntonio Urióstegui-HernándezGildardo Solorio-Díaz
Author information
JOURNALS OPEN ACCESS FULL-TEXT HTML

2020 Volume 60 Issue 6 Pages 1172-1178

Details
Abstract

In this work, the multiphase mathematical simulation (steel-argon-slag-air) was used to improve the mixing time in a secondary refining ladle, which is validated with a physical scale model using dye tracer dispertion and measurement of mixing time. An experimental 3k-p design was performed to optimize the number of cases and analyze the effect of injection gas flow arrangement. A mathematical methodology was described to determine the mixing time in a ladle with a multi-sensor system. By means of an analysis of variance, it was found that the angle of separation between plugs is the most relevant variable to reduce mixing time. It was determined that, by using a good asymmetric configuration in both gas flow and location of the porous plugs, it is possible to reduce the mixing time in a secondary steel refining ladle.

Information related to the author
© 2020 by The Iron and Steel Institute of Japan
Previous article Next article
feedback
Top