2023 Volume 63 Issue 6 Pages 993-1001
The distribution and morphology of inclusions in steel have an important effect on the quality of steel. It has been proved that the oxide inclusions can be modified into small and dispersed spinel inclusions by adding proper amount of Mg in steel. The MnS–MgAl2O4 composite inclusions are formed with the core of MgAl2O4 inclusions during the solidification process of molten steel, which has deforming ability and can improve the properties of materials steel. However, the investigation of the control of the composite inclusions is limited by the lack of understanding structure of the inclusions. In this study, the Mg treated steel samples were prepared by induction furnace in this study. In the experiment, SEM-EDS was used to characterize the samples, and thermodynamic calculations were used to describe the evolution mechanism of inclusions and MnS–MgAl2O4 composite inclusions formed in steel samples with different Mg contents. The atomic mismatch calculated between MnS and MgAl2O4 proves that they can nucleate effectively. The three-dimensional (3D) morphology of the composite inclusion of MnS–MgAl2O4 in steel samples were observed by using the X-ray Micro-CT in the beamline of BL16U2 at Shanghai Synchrotron Radiation Facility (SSRF). It is proved that MnS and MgAl2O4 phases exist in the form of co-associated, which is valuable for the control of composite inclusions in steel. The current work provide a powerful method to analyze the detailed structure of the composite inclusions in the steel.
