2000 Volume 40 Issue 12 Pages 1210-1215
Fe–4.5wt%Si strips were made using vertical type twin-roll strip casting process, and the microstructure and texture of as-cast strips were studied through thickness direction. The heterogeneity of the texture and microstructure through thickness direction was observed. Between the subsurface layer and the middle layer, Goss texture, with the subgrains of low angle grain boundary was evolved by the shear deformation. In the center layer, major rolling and recrystallization textures with minor solidification texture were evolved.
The deformation behavior during strip casting process was simulated by hot rolling of Al alloy with temperature gradient through thickness direction. And the shear and normal strains distribution through thickness direction were measured. The heterogeneity of the texture and the microstructure through thickness direction resulted from the strength gradient, which originated from the temperature gradient through thickness direction.