2000 Volume 40 Issue 4 Pages 356-363
Tensile strength and ductility of carbon steels have been measured in the temperature range of mushy zone by the in-situ melting tensile test technique with Gleeble system. The specimen was melted and cooled to the test temperature before the tensile deformation in order to get the mechanical properties subject to the continuous casting process. During hot tensile test, a ceramic fiber tube was used to reduce the radial temperature gradient in the heated specimen. Tensile strength of carbon steels in the temperature range of mushy zone increased with decreasing test temperature, and was well described by the modified yield criterion for porous metals. The measured zero strength temperature (ZST) and zero ductility temperature (ZDT) were related to the solid fractions evaluated by the numerical simulation of microsegregation developed by Ueshima et al. The characteristic solid fractions of ZST and ZDT which corresponded to 0.75 and 0.99, respectively, were well described by the prediction equation on ZST and ZDT at given steel compositions and cooling rates.
