Abstract
The effects of boron compound additive on the thermoelectric properties of α-SiC ceramics were studied. Porous SiC ceramics with 57–62% relative density were fabricated by sintering the pressed α-SiC powder compacts with B, B4C, and BN at 2000–2100°C for 3 h in Ar and/or N2 atmosphere. The sintered bodies were analyzed by means of X-ray diffraction (XRD) and scanning electron microscopy (SEM). Lattice parameter measurements revealed incorporation of a certain amount of added B into the SiC lattice and negligible phase transformation during sintering. The Seebeck coefficient, electrical conductivity and thermal conductivity were measured at 600–900°C in Ar and/or vacuum atmosphere. The kind of additives, the amount of addition and sintering atmosphere had significant effects on the thermoelectric properties. On the whole, the excess addition had a harmful influence upon electrical conductivity. The thermoelectric figure of merit of B-doped SiC was lower than that of n-type SiC.
