Journal of the Ceramic Society of Japan
Online ISSN : 1348-6535
Print ISSN : 1882-0743
ISSN-L : 1348-6535
Full papers
Anisotropic delafossite-type CuFeO2 thin films deposited by electrospinning with rotating collector
Tsu-Chia CHAOSubramanian SAKTHINATHANTe-Wei CHIUYongsheng FU
Author information
JOURNALS FREE ACCESS

2019 Volume 127 Issue 7 Pages 498-503

Details
Abstract

Delafossite CuFeO2 anisotropic thin films were prepared by electrospinning method with rotating collector. The pure phase CuFeO2 anisotropic thin films were prepared by heat treatment at 773 K in the air for 600 s and 1023 K under nitrogen for 600 s. Besides, an electrospinning process rotation speed influence on the CuFeO2 film formation. The delafossite-type CuFeO2 films were identified by X-ray diffraction and field emission scanning electronic microscopy. High-speed rotating collector were used to prepare the anisotropic thin film. Glass substrates were fixed on a rotating collector and rotated at speeds of 100–3000 rpm. The optical and electrical properties of the prepared CuFeO2 thin film were measured by ultraviolet–visible spectrometry and two-point probe method, respectively. The electrical resistance of the macroscopically anisotropic CuFeO2 thin films in the parallel and vertical directions showed a difference of 2–3 orders.

Information related to the author
© 2019 The Ceramic Society of Japan
Previous article Next article
feedback
Top