Journal of the Ceramic Society of Japan
Online ISSN : 1348-6535
Print ISSN : 1882-0743
ISSN-L : 1348-6535
Regular Issue: Full papers
Preparation and characterization of Na2.88Sb0.88W0.12S4−xOx solid electrolyte
Takuma TakayanagiAkira NasuFumika TsujiKota MotohashiAtsushi SakudaMasahiro TatsumisagoAkitoshi Hayashi
Author information
Supplementary material

2022 Volume 130 Issue 7 Pages 498-503


For the practical application of all-solid-state batteries, it is necessary to improve the performance of the solid electrolytes. We previously reported the fabrication of Na2.88Sb0.88W0.12S4, which showed the highest ionic conductivity among Na+ conducting sulfide solid electrolytes. In this study, we focused on the anion substitution of Na2.88Sb0.88W0.12S4 and evaluated oxygen substitution. Samples of Na2.88Sb0.88W0.12S4−xOx (0 ≤ x ≤ 0.5) were fabricated by a mechanochemical process and subsequent heat treatment, and structural analysis and electrochemical evaluation were performed. The solid solution of oxygen was found to proceed in the range of x ≤ 0.3. The oxygen substitution decreased the ionic conductivity, but it maintained a high ionic conductivity of more than 10−3 S cm−1. The reduction tolerance was improved by the oxygen substitution based on cyclic voltammetry measurements. An all-solid-state Na–Sn/TiS2 cell using the Na2.88Sb0.88W0.12S3.7O0.3 electrolyte operated at room temperature.

Content from these authors
© 2022 The Ceramic Society of Japan

この記事はクリエイティブ・コモンズ [表示 4.0 国際]ライセンスの下に提供されています。
Previous article Next article