Ceramic Vaporizer for Nuclear Heat IS Hydrogen Production Plant

Shintaro ISHIYAMA; Shigeki MARUYAMA

doi:10.14852/jcersjsuppl.112.0.S159.0

Journal of the Ceramic Society of Japan, Supplement 112-1, PacRim5 Special Issue

Session ID : 2

DOI https://doi.org/10.14852/jcersjsuppl.112.0.S159.0

Conference information

Host: The Ceramic Society of Japan

Co-host: Iketani Science and Technology Foundation, International Ceramic Federation, Commemorative Organization for the Japan World Exposition '70, The American Ceramic Society, The Australasian Ceramic Society, The Chinese Ceramic Society, The Korean Ceramic Society, Joint Research Consortium of Synergy Ceramics/Fine Ceramics Research Association, Nanotechnology Researchers Network Center of Japan, The Special Coordination Funds for Promoting Science and Technology, Japan National Tourist Organization, Aichi Prefectural Government, CASIO SCIENCE PROMOTION FOUNDATION, DAIKO FOUNDATION, Nagoya Convention and Visitors Bureau, The Asahi Glass Foundation, The Kao Foundation For Arts And Sciences, The Murata Science Foundation, The Ogasawara Foundation for the Promotion of Science & Engineering, ASAHI GLASS CO., LTD. Research Center, CENTRAL GLASS CO., LTD., ELECTRIC GLASS INDUSTRY ASSOCIATION OF JAPAN (EGAJ), Hattori Company, Ltd., Hitachi Research Laboratory, Hitachi, Ltd., HOYA CORPORATION, INAX Corporation, ITOCHU CERATECH CORP., Japan Cement Association, KYOCERA Corporation, KYUSHU REFRACTORIES CO., LTD., MINO CERAMIC CO., LTD., Murata Manufacturing Co., Ltd., NGK INSULATORS LTD., NGK SPARK PLUG CO., LTD., NICHIAS Corporation, NIKKO COMPANY, Nippon Electric Glass Co., Ltd., Nippon Sheet Glass Co., Ltd., NORITAKE CO., LIMITED, Tokuyama Corporation, TOTO LTD.

Papers

Ceramic Vaporizer for Nuclear Heat IS Hydrogen Production Plant

Shintaro ISHIYAMA, Shigeki MARUYAMA

Author information

Keywords: Ceramic jointing, H₂SO₄, Corrosion, IS process, Hydrogen, Evaporator

CONFERENCE PROCEEDINGS FREE ACCESS

Details

Abstract

Very high tensile strengths of SiC and its joint material over 1200 MPa and 500 MPa were achieved by newly developed reaction sintering (RS) technique. The design study of ceramic type H₂SO₄ vaporizer was performed on the base of these material data and testified its applicability for nuclear heat IS hydrogen production plant. Present study also demonstrated applicability of the RS-technique to full scale ceramic block unit(110 mm×110 mm×110 mm) with heat channels for the vaporizer.

Corresponding author

Register with J-STAGE for free!