Journal of Fluid Science and Technology
Online ISSN : 1880-5558
ISSN-L : 1880-5558
Bayesian optimization of traveling wave-like wall deformation for friction drag reduction in turbulent channel flow
Author information

2021 Volume 16 Issue 4 Pages JFST0024


We attempt to optimize the control parameters of traveling wave-like wall deformation for turbulent friction drag reduction using the Bayesian optimization. The Bayesian optimization is an optimization method based on stochastic processes, and it is good at finding the parameter values to minimize (or maximize) an expensive cost function or a blackbox function. The parameter value to be tested in the next iteration step is chosen based on the acquisition function that accounts for both the exploration term searching in high uncertainty regions and the exploitation term searching in the regions of high possibility over the current best observations. First, we investigate the effectiveness of the Bayesian optimization using a two-parameter test function with known optimum value. As a result, the Bayesian optimization is shown to successfully work. Next, we apply the Bayesian optimization to the control parameters of traveling wave-like wall deformation for friction drag reduction in a turbulent channel flow at the friction Reynolds number of Reτ = 180. While the wavenumber (k+x) is fixed, the velocity amplitude (v+w) and the phasespeed (c+) are chosen as the variable to optimize. As a result of the Bayesian optimization, although the bulk-mean velocity in the optimized case varies periodically, we achieved the maximum drag reduction rate of 60.5% when (v+w, c+) = (10.0, 42), which is higher than that in the previous study (Nabae et al., 2020), i.e., 36.1%. In the optimized case, by repeating laminarization of flow field and re-transition to turbulent flow due to the inflection instability, the bulk-mean velocity increases and decreases periodically.

Content from these authors
© 2021 by The Japan Society of Mechanical Engineers

This article is licensed under a Creative Commons [Attribution 4.0 International] license.
Previous article